CERTAIN REPAIR TO PLASTER FLOORING TILING JOINERY ETC AND PERIODICAL SERVICES AT HQ PUPSA OFFICERS MESS AND APPOINTMENT HOUSES DSOI COMPLEX MES OFFICES INSTALLATIONS STATIONERY DEPOT UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & Labour for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified & directed.

Material and Labour for 10mm thick rendering paster in cement mortar 1:4 mixed with water proofing compound @ 200ml per 50 kg by weight of cement) finised even and smooth without using extra cement on roof surface when concreate is green and wall. complete all as specified & directed. Note :- water proofing compound shall be measured and paid seperately as "supply only" under respective item of this schedule.

Supply only liquid water proofing compound complete all as specified & directed.

Surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. a) Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementitious grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement.Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required. (Contd....item no 5.01)

b) Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete . Note: Will be done when and where ever required c ) Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. (Note: Contractor shall required to deposit material required for 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc. complete all as specified & directed.

M & L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in cement mortar 1:6 complete all as specified & directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.

M & L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50 kg by weight of cement or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly Note :- Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of issue of work order

M&L 5 mm thick rendering on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

M & L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.

M & L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M & L Preparation of new plastered surface of ceiling and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M& L Preparation of Complete removal of existing treatment by mechanical means plastered old surface of ceiling and applying over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M& L Preparation of Complete removal of existing treatment by mechanical means plastered old surface of wall and applying 3mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.

M & L Preparation of Complete removal of existing treatmentplastered old surface of of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.

M & L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete.

Preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete.

M & L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion with 3mm thick JK birla wall care putty to match with the existing finish or as approved.

M & L Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling structural/framed steel work of any description as in purlin, rafter,grills, grating&doors etc. complete.

M & L for Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified & directed.

M & L in repair Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S&F MS angle iron as in door framed work conforming to Fe 290(Gde E-165) including hold fast tie rod, hinges and one shop of red oxide primer etc. complete as specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and directed.

M & L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed.

M & L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 sqm and not exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) not exc 1.50 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm complete all as specified and directed.

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified and directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F Glazing with sheet, 5.5mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

All as per srl item No .42 but fixed in repairs

S&F, in repair, Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified and directed.

S&F for repair , Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F in repair hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified and directed.

S&F in repairs PVC sheet wall panelling (sandwiched between the longitudinal grid in PVC sheet) any pattern fixing at site with PVC beading / fillet complete all as specified and directed.

S&F in repair plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitrous china wash hand basin white flat back, size 580x450mm including waster pipe , chromium plated waste coupling 32mm dia , bracket etc complete all as specified and directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : - (i) (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

M & L in repair 2nd class hardwood section not exc 3 Sq cm Plain fillets.square,rectangular ortriangular insection, clean sawn, secured with nails or brads, bull nosed, splayed,chamfered or rounded on one edge or face complete all as Specified and directed.

M & L in repair 2nd class hardwood section exc 3 Sq cm & not exc 6 Sq cm Plain fillets.square,rectangular ortriangular insection, clean sawn, secured with nails or brads, bull nosed, splayed,chamfered or rounded on one edge or face complete all as Specified and directed.

M & L for 1st class wood hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a). complete all as specified & directed.

S&F 100 mm butt hinges, meium weight Brass complete all as specified & directed.

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified & directed.

S& F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed

S & F 125mm Extruded brass handles,fabricated type polished complete all as specified & directed.

S&F in repair aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified & directed.

S&F in repair factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified & directed.

M& L in repair Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified & directed.

S&F in repair,100 mm butt hinges, meium weight cold rolled mild steel complete all as specified & directed.

S&F in repair, aluminium handle cast type anodised 125 mm long complete all as specified & directed.

S&F in repair, aluminium anodised barrel tower bolt 150 mm, extruded section complete all as specified & directed.

S&F in repair, Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repair, aluminium anodised barrel tower bolt 200 mm, extruded section complete all as specified & directed.

S&F in repair, aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified & directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified & directed.

M&L Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and directed.

M&L for vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 2400mmx800mm size) but not exceeding 2 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed.

M&L in repair, 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F in repair continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc. 1000 Ltrs complete all as specified & directed.

S&F 500 Ltr capacity White rotational moulded polyethene water storage tank tripple layered ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F 1000 Ltrs capacity White rotational moulded polyethene water storage tank (tripple layered) ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed

S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified. complete all as specified and directed.

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed.

S&F in repair angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed

S&F in repairs stop valves chromium plated , 15 dia bore fixed complete all as specified & directed.

S&F in repairs 15mm dia brass chromium plated central holw wash basin mixture fancy type with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nut capstan head complete all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot and cold water screwed , fixing and connection to pipes complete all as specified and directed. Make Cera Cat Part No F-1017401 / Pearl Cat Part No ARI-015 / Hindware Cat Part No. F740022

S&F in repair PVC connection 15 mm size with PTMT nuts 450 mm long. complete all as specified and directed

S&F in repair PVC Bath cabinet with mirror 18"x22"x4.25". complete all as specified and directed. Make : Commander / Prayag / Shakti.

S&F in repairs chromium plated towel rack of size 24" complete all as specified and directed.

S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. Make : Cera of Cat Part No S101314L or equivalent Model of Parryware / Hindware

S&F in repair CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed

S&F in repair super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and directed

S&F in repair stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods complete all as specified and directed

S&F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge complete all as specified and directed

S&F in repair Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept in the office of Engineer-in-Charge complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair, 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repair complete all as specified and directed

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm width with chromium plated bracket guard and railing 60cm long fixed in repair complete all as specified and directed

S&F in repairs brass chromium plated soap dish complete all as specified and directed. Make- Jaquar (Cat No- ACN-1131N) Model of Mark / Kerovit (Kajaria) or equivalent

S&F in repair for over head Shower complete all as specified and directed

Dismantling of cast iron PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

S&F in repair PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified and directed

S&F in repair PVC(SWR) bends 110mm bore any radius complete all as specified and directed

S&F in repair PVC(SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed

Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

M&L for Armstrong ceiling made out of 600X600X15 mm thick Clasic lite (RH-99) Mineral fiber acoustical ceiling board/tiles deep panel suspensor system made out of GI sheet main Tee of size 23.5mmx40mmX0.63mm and cross Tee of size 23.5mmX23.5mmX0.63mm and angle size 19mmx19mmX0.63mm, powder coated including 3mm GI wire for suspending, bolts, necessary washers, nut/clits/pin hook etc for securing frame work to ceiling to the snap grid all as directed by Engr-in-Charge including provision of necessary holes/cuttings for providing light/fan as required, with and including dismantling exisying un-serviceable false ceiling with grid.

S&F Anodised aluminium snap grid frame workframe work for false ceiling complete all as specified and directed

Taking down aluminium windows (with frame & shutters) for servicing by tightening loose fittings & aluminium sactions by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same opening complete all as directed.

S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 300mm long for wash hand basin area with brackets complete all as specified and directed. Make : Cat No. CAN-1101N of Jaquar or equivalent Model of mark / Kerovit (Kajaria)

S&F in repairs pillar Tap cast coppeer alloy with captan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.

M&L cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base. complete all as specified and directed

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L For Providing and fixing 10mm thick plaster of paris sunk or raised moulding ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately complete all as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre tocentre. complete all as specified and directed

M&L for stainless steel silver and black name plate , for office wall mounted (size 300mmx200mm) all as specified and directed

Arun Construction Co.

vibha associates

M/s JS Constructions

P K ASSOCIATES

M K ENGG CO

Manglam Engineers and Construction Co