REPAIRS/REPLACEMENT OF WOODEN FLOORING, WALL PANELLING, CEILING, DOOR AND WINDOW AT ZAKHAMA MIL STN

Amount

Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position, complete all as specified and directed

Dismantling boarding,any description, fixed in any position with nails. complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets. complete all as specified and directed

M&L for wrought sawn 2nd class hard-wood in scantling fixed. complete all as specified and directed

S&F for 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work fixed in wall. complete all as specified and directed

All as per item S No 15 above but on ceiling

S & F 4mm thick veneered decorative plywood, grade1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work. complete all as specified and directed

Dismantling timber scantling unframed works in fillets, rails posts, rafters, purlins etc under 40 Sq cm in section complete all as specified and directed

M&L for 2nd wrought swan hardwood plain fillets,square,rectangular or triangular in section, se-cured with nails or brads ( sectional area Exc 13 & n exc 25 sq. cm). complete all as specified and directed

All as per item No 18 above but bull nosed,splayed,chamfered or rounded on one edge or face (sectional area 6 & nexc 13 sq.cm)

M & L for 30mm tick IInd class hard wood plained one side, with butt jointes and fixed with nails supplied and fixed complete all as specified and directed

Taking down shutters of any description n.exc 1 sq.m each, complete all as specified and directed

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each, complete all as specified and directed

Taking down chowkhats or frames with shutter not exc 1.5 sq.m each. complete all as specified and directed

M&L Flush shutters 30mm, solid core construction, with block board core and plywood face panels, commercial type on both sides. complete all as specified and directed

M&L 30mm thick 2nd class hard wood, glazed and skelton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars ) ,edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a). complete all as specified and directed

M&L 2nd class Hard Wood, 30mm thick glazed and skelton shutters, open rebated and prepared to receive glass,gauze, etc. and divided into squares,with plain,chamfered or rounded ,mitered and rebated sash bars any numbers provided with stiles and rails as specified in SSR Part-I, Section 8 clause 8.24 (b). complete all as specified and directed

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed

S&F in floor door stopper of aluminium alloy body and tongue, anodised,( overall length of cover complete all as specified and directedplate 140mm) with hard drawn steel spring, fixed in floor.

S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg . complete all as specified and directed

S& F Curtain rod 20mm dia, mild steel, chromium plated with fixing brackets, stops,rollers etc fixed in repairs. complete all as specified and directed

M&L 3mm sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm each pane. complete all as specified and directed

All as per item above but exc 0.5 sq.m in each pane.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples . complete all as specified and directed

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all neacessary labours ; articles nexc 200 cu.cm each. complete all as specified and directed

S&F Butt hinges stainless steel 100mm size. complete all as specified and directed

S&F Butt hinges 100 mm size med weight cold rolled steel mild steel. complete all as specified and directed

S&F Butt hinges med weight cold rolled mild steel and fixed 75 mm size. complete all as specified and directed

S&F Butt hinges med weight cold rolled mild steel and fixed 50 mm size for door stopper . complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed. complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long, complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long, complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised 150mm size. complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised 100mm size. complete all as specified and directed

S&F 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer exceeding 10cm width or girth complete all as specified and directed

M & L for preparation of old wooden surfaces and applying one coats of synthetic enamal paint. complete all as specified and directed

M & L for preparation of new wooden surfaces and applying annd applying two coats of synthetic varnish complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

M&L rendering 15mm thick in CM 1 : 4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement. complete all as specified and directed

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 6 and finishing even and smooth without using extra cement. complete all as specified and directed

M & L for preparation of new plaster surfaces of wall and applying two coats of oil bound distemper over a coats of primer complete all as specified and directed

M & L for preparation of new plaster surfaces of wall and applying two coats ofcement based paint over a coats of primer complete all as specified and directed

Rameshwar Prasad

M/S RAHUL TRADING CO.