CONSTRUCTION OF PUBLIC DISTRIBUTION SHOP IN AGARAMTHEN PANCHAYAT AT ST THOMAS MOUNT PANCHAYAT UNION. SCHEME OF MP LAD 2025 - 2026 ESTIMATE AMOUNT RS.13.50 LAKHS

Amount

Earthwork excavation in all classes of soils except hadr rock in hard ordinary soil with initial lead and lift including all other labour chargesetc. Complete as per SS 20 B.

Filling with good dry Msand including cost and conveyance to site and labour charges for filling, watering, tamping etc. complete

Cement Concrete 1:4:8 ( One Cement Four sand and eight Hard Broken stone) using 40 mm gauge Hard Broken Granite stone jelly for foundation including cost and conveyance of materials to site and labour charges for laying, watering and compacting etc. comple

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supplying & Erecting centering for sides & soffiots including necessary supports & Labour charges etc., completely.

Supplying & Erecting centering for sides & soffiots including necessary supports & Labour charges etc., completely.

Reinforcement Cement Concrete 1:11/2:3 (One cement, one and half part of sand, three Hard Broken stone) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.(Below Basement)

Reinforcement Cement Concrete 1:11/2:3 (One cement, one and half part of sand, three Hard Broken stone) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.(Above Basement

Brickwork in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site mixing, palcing, curing and all labour charges etc. complete

Brickwork in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site mixing, palcing, curing and all labour charges etc. complete

Supply and fabrication of steel including cost and conveyance of all materials to site and all labour charges for placing in position etc. complete.

Granolithic Flooring CC1:2:4 (one of cement two of sand and four hard brokken stone) 40mm thick using 20mm ISSmetals including all other charges etc.,

Finishing the top of roof with one course of Machine pressed tiles of size 23x23x2cm in 1:3 12mm thick using WCC ivl cost and conveyance of all charges etc complete

Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly compl

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the sta

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering in CM 1:5 mix, 12mm thickness including cost and conveyance of all materials to work site from approved quarry sources and labour charges etc. complete.

Supplying and fixing fine polished cuddapah slab Storage 50mm thick

Indian water closet-580x440mm

Indian wash basin-550x440mm

Steel Door D1

PVC Toilet D2

Steel window W

Supplying, fabricating and placing in position of steel glazed ventilator wit two panes in all floors with aluminium section of the following sizes with necessary accessories such as rubber beading and fixing 4mmthick plain glass including cost of all materials, labours,power consumption charges required for fabrication,drilling holes in RCC columhs,: s136, masonry walls wherever necessary with power drills to the extent and make good to the original condition after fixing and as directed. All aluminium sections are to be anodized with matt finish under electrically controlled conditionin accordance with IS 1868 / L962 for an average anodic film thickness of lSmicrons etc, complete.

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transpoftation charges etc.,

Painting two coats with plastic emulsion paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers

Painting two coats with plastic enamal paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigidpipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 1.5 sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD-23

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter downrod on the existing clamp SD 107

Supply and fixing of Single box type of 4'-18W LED tube with fitting inclusive of all charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}18%

M JAYAPRAKASH (BID ID -1532587)