Repair and renovation of Sociology deptt

Amount

CIVIL WORK Removing dry or Oil bound Distemper by scrapping , sand papering and preparing the surface smooth including necessary repair to scratches etc. complete

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with O.B. Distemper washable distemper of approved brand & manufacture to give an even shade new work (two or more coats) over & including priming coat with cement primer

Providing and fixing PVC wall panelling of superior quality of pattern, colour/shade as approved by the Engineer-in-charge including cost of allied material as required. Nothing extra shall be paid for wastage.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of minimum thickness 5 mm of approved make (JOHNSON SOMANY, KAJARIA make in colour as approved by the Engineer In Charge of size 300 x 450mm/300x600mm in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.

Painting with Synthetic Enamel paint of approved brand and Manufacture to give an even shade one or more coats on old work

Repairs to plaster of thickness 12mm to 20mm in patches including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish outside the University Campus. With cement mortar 1:4(1cement :4 coarse sand). Internal and External Plaster. All work upto floor V level.

Providing & fixing ISI marked flush door shutters non decorative type, core block board construction with frame of 1st class hard wood & well matched commercial 3 ply veneering with vertical grains or cross bands & face veneers on both faces of shutters -35mm thick including ISI marked bright finished MS butt hinges with necessary screws including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac). All work upto floor V level.

Supply of 2nd class Carpenter for easing of doors, windows etc. complete.

Providing Salwood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position including applying a coat of wood primer and then two or more coats with synthetic enamal paint of approved brand and manufacture (Make Asian/Nerolac).

SANITARY WORK P/F white vitreous china wash basin including making all connection but excluding the cost of fitting Flat Back W/basin(of size 550 x 400mm)(Parry ware /Hind ware/ Cera)

P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes/chases in walls and making good the same/earth work in trenches (Parkash Surya/Jindal) 15 mm nominal bore

P&F of White vitreous China pedestal for washbasins completely recessed at the back for the reception of pipes & fittings (Make Parryware/Hindware/Cera).

P/F Salem Stainless Steel A ISI 304 kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x460mm & Bowl depth 200 mm..

P/F of PTMT Pillar cock ‘Prayag Make’ 15 mm (nominal size) 107 mm long weighing not less than 110 gms.

P/F PTMT angle valve/stop cock for basin mixture Geyser points/washbasins of ‘Prayag Make’ 15mm nom. Bore, 86 mm long weighing not less than 88 gms.

P/F of unplasticised PVC connection pipe with brass union 45 cm length & 15 mm nom. bore.

Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors with cement concrete 1:2:4 casing. 100mm inlet and 75 mm outlet

Providing and laying PVC pipe superior quality of following dia (Uniplas, Supreme, Finolex make) 4 kg/cm2 pressure in ground/on walls including all PVC fittings jointing with adhesive of approved make ,making good the same etc. complete. Nothing extra shall be paid. . 80mm dia

P/F mirror of superior glass (of approved quality) with plastic moulded frame of approved make and shade with 6 mm thick hard board backing (Rectangular Shape 453x357 mm).

P& F white vitreous china pedestal type (European type/wash down type) water closet pan (Parry ware /Hind ware /Cera)

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm

P/F PTMT Grating (Prayag Make) 100mm dia circular type

P/F solid plastic seat with lid for pedestal type W.C. pan complete (Parry ware /Hind ware/ /Cera)White colour

P/F of PVC cistern bend pipe of standard size

P/F PTMT bibcock of Prayag Make 15mm nominal bore, 86 mm long weighing not less than 88 gms. Mm

P/F PTMT waste coupling of 32/40mm nom size for wash basins/sink coupling 38 mm of 83 mm length and 77 mm breadth weighing not less than 60 gms. (Prayag Make)

P& F CP jet with PVC pipe to be fixed with WC

P/F low level PVC flushing cistern with manually controlled device (handle lever) conf. To IS: 7231 with fitting & fixtures complete (Parry ware / Hind ware /Cera) 10 Liter Capacity – White.

Supply of 2nd Class Plumber for repair works.

M/s Guru Nanak Builders

M/S PARVEEN SINGH RAINA

KRANTI LAL KHAJURIA