Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 2ND FLOOR SHOP NO 303 MARUTI PLAZA RONCHI BANGAR TOWNSHIP MATHURA | MATHURA | UTTAR PRADESH | 281001 | Admitted-Finance |
| 2 | Admitted-Finance 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical PTAEL NAGAR TELIPHONE EXCHANGE BIJROL ROAD BARAUT BAGPAT UTTAR PRADESH 250611 | BAGHPAT | UTTAR PRADESH | 250611 | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹7.5 L
EMD Value
₹8,000
Closing Date
1 May 2023, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE ETC Mathura
132 KV S/S Aurangabad Mathura
Works of construction of 132 KV Air Liquid bay and other associated works at 132 KV Sub-Station KOSI-Kalan UPSIDC Under ETD Mathura
2023_UPTCL_797152_1
ET-02/ETC(M)/23-24
Open Tender
Electrical Works
Lump-sum
90 days
Under ETC Mathura
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
EE ATT ETC Mathura
₹8,000
23 May 2023
13 Apr 2023
3 May 2023
13 Apr 2023
1 May 2023
13 Apr 2023
Amount
Construction work of 132KV Bay
Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. structure required for installation of Main /Transfer bus, Jack busbar, isolators, P.I., CTs., L.As. and all other equipments. The job consists of shifting of all material i.e. conductor, fittings, structure parts, nuts, bolts, washer etc. from store to site of erection, erection of structure as per relevant drawing and practices using flat and spring washer with each bolt. Matching of holes, cutting, matching of members if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost.
Erection of following equipments as per instruction manual of various equipments and technical specifications including shifting of material/equipments from store to erection site including all other associated work to complete the job satisfactorily.
132 KV CB SF6
132 KV BI/LI
132KV PT Junction box
132 KV CT junction box
132 KV SAS LINE Feeder panel
ABT with energy meter
De-Stringing of various main, Transfer bus of 132 KV with different type conductor and different length of span mention below including de-fitting of tension clamp de-hoisting of insulators and also shifting of all material form site to store and all other associated works required for completion of job satisfactorily as per technical specification.
132 KV over head Jack Bus with 3x Panther (Approx 36Mtr section)
Stringing of various main, Transfer bus of 132 KV with different type conductor and different length of span mention below including fitting of tension clamp hoisting of insulators cutting of conductor and also shifting of all material form store to work site and all other associated works required for completion of job satisfactorily as per technical specification.
132 KV over head Jack Bus with 3x Panther (Approx 36Mtr section)
132 KV Main Bus 3x Moose (Approx 15 Mtr section)
132 KV Transfer Bus with 3x Panther (Approx 12 Mtr section)
Dismantling of exisiting jumpers of 132 KV C.B. C.T. Isolator and LA made of single Moose/Zebra/Panther conductor with bending and shaping of conductor along with shifting of material from site to store.
Making of new jumpers of 132 KV C.B., C.T., ,Isolator and LA by the single Moose/Zebra/Panther conductor with cutting bending and shaping of conductor along with shifting of material from site store to work place.
Providing inter connection diagram and cable schedule as per drawing to complete job including C.B., C.T., PT., Isolator, Panel etc for proper wiring and commisioning of bay.
Laying of following sizes of control cable in the cable trench from control relay panel to various equipments/marshalling boxes/junction box etc. in switchyard as per cable schedule, their saddling at every 750mm distance with M.S. saddles of size 25x3mm size including carriage of cable drums from store to laying site and shifting back the remaining material to store and all other associated work to complete the job satisfactorily as per technical specification.
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Termination of following sizes of cable as laid above as per cable schedule including making necessary holes in glands plates or box wherever required. Supply and fixing of cable glands of appropriate size, supply and providing ferrules and Nos. for each core. (The rates of termination of control cable include the all cores of cable at one end with lug)
6x2.5 Sq. mm.
4x2.5 Sq. mm.
2x2.5 Sq. mm.
Cutting, straightening bending & laying 800mm below inside ground and above ground of following size M.S. flat for earthing of main and auxiliary structure, equipment structure etc. including welding with main earthmat and with object to be earthed excavation of trenches, its back filling, painting and all other associated work as required to complete the work satisfactorily excluding the cost of M.S. flat.
To make earthing for L.A. with 06 Nos. Electrode of 03 meter long M.S. round including cutting, welding and making electrode and making a rectangle with 75x10mm M.S. flat inside earth below 0.8mtr. deep including excavation and refilling of soil with T&P and labour etc for completion satisfactorily.
Laying of 40/36 mm size M.S. round bar 600 mm below ground level including cutting, straightening welding, painting of joints with bitumen black Japan paint, excavation of trench, its back filling and all other associated work to complete the work satisfactorily as per drawing and technical specification (excluding the cost of MS bar) work includes providing and fixing of 100 mm long, 50X50X6 mm MS angle (4 Pcs) at each cross joint of earth mat as per direction of supervising engineer to complete the job satisfactorily.
Fabrication of 3 meter long Electrodes with the 40 mm/36mm MS rod having 150 MM long conical shape and then its piercing vertically inside the ground with top 600 mm below ground level and its welding with main earthmat excluding the cost of MS bar, providing anf fixing 50x50x6 angle 100 mm pieces for each joints as per direction of supervising engineer to complete the job satisfactory.
Sorting/counting/stacking erection mark wise and proper loading of GI substation structure ( ALP, ABL, BCT,AXM, BTM, ATM, BBL, BTI, ) etc. in trucks / trailor at EFU Nainy Allahabad and Safe carriage of loaded structure from EFU Nainy Allahabad to 132 KV S/S kosikalan UPSIDC Under ETD Mathura. App. 600 Km and Unloading of carriage structure from the trucks/trailor at132 KV S/S kosikalan UPSIDC Under ETD Mathura. Its sorting, counting and proper stacking at the S/S premises as per direction of supervisory engineer to complete the job satisfactorily (Appr. weight of 13 MT)
Providing and fixing of retro reflective sign board of size 3ftx2ft made out of 2mm thick aluminum sheet, face to fully covered with 3M DG cube retro reflective sheet of green colour. The letters and symbols shall be computer cut and in white colour. Board is to be supplied along with the back support from of size 35x35x5mm & two legs for grouting. Backside of aluminum sheet shall be painted with stove enamel black paint. Language for writing will be provided by the department (UPPTCL).
Fabrication of hut type fire bucket stand made of MS angle of size 40x40x6 mm and ISI mark MS roofing sheet, having arrangment for hanging 10 buckets. All the metal surfaces should be painted with one coat of red oxide and two coats of first quality post office red synthetic enamel paint of Asian Paints/Nerolac/Berger. " FIRE" in 25 cm should be written in white color on the top of the both side of roof after painting in red colour. All the material including MS angle shall be provided by the contractor at his own cost.
Providing fire buckets of 9 ltr capacity as per IS 2546, buckets should be painted inside by white and outside by post office red colour; ear and handle by black color with two coats of first quality synthetic enamel paint after one coat of red oxide, from Asian Paints/Nerolac/Berger. "FIRE" and "AGNI (Hindi)" in 10 cm font in white color should be written on opposite sides of buckets. All the material shall be provided by the contractor at his own cost.
Work of Strengthening of Lighting Arrangement
Supply & fixing of round pole of MS pipe B class 9 meter long (114.3 mm x4.5mm x5meter 88.9 mm.x3 65mm x2.0 meter, 76.1mm x3.2mm x2meter) with base plate work induded duly bainted with synthetic Aluminium enamel paint completely as outer surface of ms round pole and grouting with plinth size 300mm duly earth with MS electrode and All other associated work to complete the job satisfactory as per direction of supervising Engineer.
Supply & fixing of pole bracet of '2' dia MS pipe of B Class (ID 50mm OD 60mm.)1 2 meter long filled at angle of 30 degree suitable at 100 W LED luminaries and All other associated work to complete the job satisfactory as per direction of supervising Engineer.
Supply & fixing of 100 watt LED Lamp Crompton Greaves /Bajai/Syska/Philips make fiting including lamp and all fixtures etc. for fixing of round pole including cost of all meterial labour and T&P for completion of work. and All other associated work to complete the job satisactory as per direction of supervising Engineer.
Supply of fixing of junction box on lighting poles of sive 200x200x150 mm of MS sheet 16 SWG duly painted with synthetic enamel paint box should be fixed with 01 No 6Amp MCB and backlite terminal surip of 4 Nos terminal both should be fixed on sunmica sheet and half round M.S. Clamp with Gl pipe for fixing the junction box on the pole and All other associated work to complete the job satisfactory as per direction of supervising Engineer.
Laying of 4x2.5/6x2.5 sqmm PVC cable 50cm. Blow the ground level in PVC conduct pipe afler exavation and back fitling including all labor PVC pipe etc and All other associated work to complete the job satisfaclory as per direction of supervising Engineer.
Laying of 2x2.5 Sqmm PVC cable from fitting to junction box inside the pole and All other associated work to complete the job satisfactory as per direction of supervising Engineer.
For Supply
Supply of Bolted type bus bar tension fitting suitable for Moose conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase.
Supply of Bolted type bus bar tension fitting suitable for ACSR Panther conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase type turn buckle in all respect.
Supply of P.G. clamp made of LM-6 alloy along with Galv. nut, bolt & washer suitable for Moose to Panther conductor.
Supply of P.G. clamp made of LM-6 alloy along with Galv. nut, bolt & washer suitable for Panther to Panther conductor.
Supply of P.G. clamp made of LM-6 alloy along with Galv. nut, bolt & washer suitable for Moose to Moose conductor.
Supply of 145 KV Insulator Bus Post clamp made of LM-6 alloy along with Nut, Bolt & washer suitable for Panther conductor.
Supply of suspension fitting suitable for Moose conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase.
Supply of suspension fitting suitable for Panther conductor made of LM-6 alloy Complete with ball eye socket and ‘D’ shackle single phase.
Supply of tinned copper bond size 15x550mm long made of 12mm multi stranded rope type 450mm long should be joined together and cramped with copper lug (20mm hole) on both ends as per sample
Supply of Earthing/Discharge rod of first class insulation for system voltage upto 400 KV having total height as 7200mm (24’) one set consisting following items. (a) Earthing pole 6.5Mtr. long in four pieces made of epoxy bonded glass fiber. (b) Earthing cable 12mtr. long with transparent PVC insulated 12 mm2 dia flexiblity copper wire fitted with line end earthing clamp of all alloy suitable for 4” IPS tube Moose/Zebra conductor. (c) Canvas carry bag for above.
SHIVAM ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .