Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.5 LAccepted-AOC NEAR G E COLLEGE RASHOOLPUR MAHARAJPUR GWALIOR MP 475110 | GWALIOR | MADHYA PRADESH | 475110 | L1 | Accepted-AOC Being a lowest tender | |
| 2 | L2₹46.0 L+₹14.5 L (46.0%)Rejected-Finance | L2 | Rejected-Finance Not a lowest tender | |
| 3 | L3₹47.1 L+₹15.6 L (49.5%)Rejected-Finance | L3 | Rejected-Finance Not a lowest tender | |
| 4 | L4₹47.1 L+₹15.6 L (49.6%)Rejected-Finance NAKA CHANDRA WADANI NAHARWALI MATA ROAD LASHKAR GWALIOR MP | GWALIOR | GWALIOR | MP | L4 | Rejected-Finance Not a lowest tender | |
| 5 | L5₹47.6 L+₹16.1 L (51.1%)Rejected-Finance DUNIYAGANJ DUNIYAGANJ PHULPUR PHULPUR ALLAHABAD UTTAR PRADESH 212402 | PRAYAGRAJ | UTTAR PRADESH | 212402 | L5 | Rejected-Finance Not a lowest tender |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TA Gwalior
GE AF TA Gwalior 474020
REPAIR/MAINT OF TOILET AND CERTAIN E/M INSTALLATION IN TECH AREA AT AF STN GWALIOR
2023_MES_590990_1
8900/1464/GWL/E8
Open Tender
Civil Works
Item Rate
330 days
AF STN Gwalior
As per tender documents
8 documents required · 8 mandatory
₹500
GE AF TA Gwalior
₹90,000
Yes
26 Jul 2023
24 Apr 2023
3 Jun 2023
24 Apr 2023
27 May 2023
22 May 2023
Amount
Demolition of RCC in cover slab, floors and pavings n.exc 15 cm thickness (below or above ground level ) reinforcement cut as required to facilitate demolition complete all as specified and directed
M & L for providing precast reinforced cement concrete type B1 (1:2:4) (using 20 mm graded aggregate ) as in cover Slab including necessary formwork set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
M&L for Mild steel bars (TMT bars) 8mm dia and over cut to length, bent to shape required including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.
Description same all as per item No 4 above but 15 mm bore complete all as specified and directed.
Refixing old steel tubing 20 mm bore and connections in new or old position ( walls,ceiling, floors, etc) complete all as specified and directed
Description same all as per item No 6 above but 15 mm bore complete all as specified and directed
S&F steel tubing 20mm bore medium grade with all fitting and fixed complete to walls, floor and ceiling etc complete all as specified and directed Note :- cutting chases and making good shall be measured and paid separately under respective item.
Description same all as per item No 8 above but 15 mm bore complete all as specified and directed
M&L for cutting chases, pinning in making good to facing for concealed water tubing n.exc 10cm girth and making good with (1:3) cement mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic tiles coloured in vertical surface 450x300x7mm thick as on wall etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed.
Demollition of cement concrete ( unreinforced) including floor tiles, screed bed at ground floors and pavings, coping n. exc 15 cm thick below or above ground level and removing the demolished material to a distance exc 500 m but not exceeding 1.5 km and depositing where directed, complete all as specified and directed .
M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in benching, kerbs, haunching and levelling course etc complete all as specified and as directed.
M&L for plain cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete and sunken complete all as specified and directed
M & L for PCC (1:2:4) type B0, (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed .
M&L for 75 mm thick plain cement concrete (1:3:6) type C2, using (20 mm graded stone aggregate) as in Plinth protection etc and finishing the surface even & fair complete all as specified and directed.
M&L for 100 mm thick plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in pavings/hard standings and finishing cement concrete surface even & fair,laid in alternate panels complete all as specified and directed.
M & L for 75mm thick cement concrete type D-2, 1:4:8 using (40 mm graded aggregate) as in sub base all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring complete all as specified and directed.
M&L for 20 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:6 complete all as specified and directed.
M&L for 15 mm thick screed bed or bedding in layer of mortar for laying floor finishes in cement plaster 1:4 complete all as specified and directed.
M&L for non skid joint free coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles complete all as specified and directed.
M & L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
S & F for Non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles all as specified and directed.
All as per item no. 25 here-in-before but as in skirting/dado including jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 10mm thick cement plaster1:4 as backing coat complete all as specified and directed.
M&L for 10 to 12mm thick Endura designer tiles of size n.exc 0.16 Sqm any colour and shape with grey cement and pigment set, jointed and pointed on neat cement slurry as in floors complete all as specified and directed by Engr-in-Charge. (Make - DUROTA/JOHNSON/ORIENT/SOMANY)
S&F in repair for 200 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 200mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair for 110 mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal fixed to PVC pipes with necessary solvent cement complete all specfied and directed.
S&F in repair for 75mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 75mm PVC(SWR) bends fixed to PVC pipes with necessary solvent cement complete all as specfied and directed.
S&F in repair for 25mm bore dia PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor and wall complete all as specfied and directed.
S&F in repair 25mm PVC(SWR) bends complete all as specfied and directed.
S&F in repair PVC(SWR) floor trap/nahani trap including PVC grating suitable for 75mm bore pipe complete all as specified and directed.
Demolition Stone slabs and tiles of any description or thickness in floors, walls laid bedded and pointed in any mortar complete all as specified and directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in platforms for ovall shape wash hand basin inculding cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed bed in CM 1:6 complete all as specified and directed.
M&L for 60mm thickness Machine pressed precast concrete interlocking paver block any shape and size of M-35 Grade confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed. (Make :- ISI Marked as approved by GE)
Sand filing under floors or in foundation incl. watering and consolidation complete all as specified and directed.
M&L for applying two coats of OMNIPLAS EP-101 epoxy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd. Bombay or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor and wall of sunken portion complete all as specified and directed
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 500 Ltr capacity complete all as specified and directed.
S&F in repair, rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete as specified and as directed.
S&F in repair, stainless steel grating with centre hole of size 100 mm complete all as specified and directed.
S&F in repair 15mm bore Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.
S&F in repair 15mm bore two way Angle valve fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union as approved complete all as specified and directed.
S&F in repair 15 dia anglular stop cock with wall flange all as specified and as directed.
S&F in repair stop valve 20mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair chromium plated fency type long body bib taps cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F in repair Brass CP Bottle trap 32mm bore with 250mm and 190mm long wall connections pipes including necessary packing, complete all as specified and directed.
S&F in repair, 15mm bore health faucet fancy type chromium plated with accessories complete all as specified and directed. Make : Parryware, Prayag, Jaquar etc.
S&F in repair, 15mm bore basin mixer taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down for pipe, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. MAKE : Parryware, Cera, Jaquar, Hindware.
S&F in repair, 15mm bore wall mixer taps, cast copper alloy, chromium plated, fancy type screwed down for pipe, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. Make : Parryware, Cera, Jaquar, Hindware.
S&F in repair, float valve/ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20 mm -210 gms ) suitable for 20 mm dia Pipe complete all as specified and directed.
S&F in repair, for gun metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe of bore 20 mm and fixed complete all as specified and directed.
S & F in repair, for 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white , with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
S&F in repair for PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair, vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white integral foot rests ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including seat cover , fixing bolts and flush pipe complete all as specified and directed.
S&F in repair vitreous china counter top wash hand basin, white/coloured, flat back, size 560 x 455mm excluding taps, waste pipe & PTMT waste coupling of 32 mm dia complete all as specified and directed. MAKE : Parryware, Cera, Jaguar,Hindware or equivalent Make as approved by GE.
S & F in repair vitreous china wash basin, white, flat back size 550 X 400mm including waste pipe complete all as specified and directed.
S&F in repair Vitreous China urinals half stall type flat back white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing flush pipe grating and union for discharge pipe complete all as specfied and directed.
S&F in repair vitreous china urinal partitiaon white of size 310x700mm complete all as specified and directed.
S&F in repair coloured vitreous china EWC including cistern (Cascade Pattern) wall hung/floor mounting as single piece closet of parryware or equivalent including all fitting & fixtures required for proper function complete including necessary pipe, bend, making holes into existing wall, floor etc and making good with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed. Make : Parryware/Hindware
S&F in repair urinal waste pipe (Make Prayag ) , all as specified and as directed.
S & F in reapir flush pipe of polythylene of low or high level density or PVC ,32 mm dia ,for low level cistern ,all as specified and as directed.
S&F in repair waste coupling 32 mm full threaded for WHB all as specified and as directed.
S&F in repair Waste coupling of CP brass (half or full threaded) suitable for urinals, 32 mm dia all as specified and as directed.
S&F in repair Waste coupling of PTMT (half or full threaded) suitable for urinals, (Minimum weight 32mm-45gms, 32 mm dia ,all as specified and as directed.
S&F in repair chromium plated Self Closers Pillar Tap complete all as specified and directed.
S&F in repair chromium plated Flush Cock (Push Type) 25mm complete all as specified and directed.
S&F in repair chromium plated Pillar Cock Swan Neck (T/M) complete all as specified and directed.
S&F in repair chromium plated Urinal spreader with 15mm dia pipe complete all as specified and directed.
S&F in repair CP toilet paper holder box type with necessary brass screw complete all as specified and directed.
S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F in repair old unserviceable PVC top cover of tanks over head tank of 300 to 500 ltrs capacity with hinging device, with necessary nuts, bolts and washers installed at roof top, all as specified and directed by Engineer-in-Charge.
All as per item No 81 above but capacity exceeding 500 Ltrs and not exceeding 1000 Ltrs all as specified and directed by Engineer-in-Charge.
S & F in repair 2mm thick pvc tiles/ sheets , liminated plain coloured ,marbled mosaic or mottled finish laid with approved rubber based adhesive in floors including all cutting and waste and work in all position complete all as specified and directed .
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillasters etc complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:4 complete all as specified and directed.
Description same all as per item No 86 above but, except brick using old retrieved bricks obtained from demolition in serviceable conditions complete all as specified and directed.
M & L 15 mm thick rendering in CM 1:4 on fair faces of bricks/concrete, finished even & smooth without using extra cement and mixed with water proofing compound (liquid type) @ 200 ml per 50 Kg of cement, complete all as specified and directed by Engineer-in-Charge. (Note : WPC (liquid type) shall be measured and paid separately as supply only)
Supply only water proofing compound.
M&L for 15mm thick rendering other than fare face of brick/stone masonry walls in CM 1:6 finished complete all as specified and directed.
M&L for 15mm thick rendering on fare face of brick/stone masonry walls in CM 1:4 finished complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper with roller over one coat of primer white or tinted as approved complete all as specified and directed.
M&L for preparation of new plastered surfaces on walls and applying two coats of exterior emulsion paint (weather coat) with roller over a coat of primer white or tinted as approved all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each including all hard ware fitting complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n. exc 1.5 Sqm each including iron mongories complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n'exc 4 Sqm each including iron mongories complete all as specified and directed.
S&F 30mm thick Flush Shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer of any description, not otherwise described, over 10cm width or girth complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium door shutters aluminium section weight 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium sections weight 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws (Thickness of powder coating not less than 50 micron) etc complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick ACP (Aluminium composit panel) of any colour fixed to door with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed by Engr-in-Charge.
S&F 5mm thick tinted glass fixed with necessary rubber gasket and aluminium snap beadings tint match with existing complete all as specified and directed.
S&F Factory made solid PVC Moulded door shutter (with Wood free EPS), 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.
S & F solid PVC moulded door frame of size 50 mm x 47 mm made out of 5 mm thick PVC sheet (shade matching with door shutter) reinforced with MS Square tube and edges will be painted to match with printed sheet complete all as specified and directed.
S&F 100 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150 mm long powder coated Aluminium tower bolt, tint existing to match complete all as specified and directed.
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type anodised, complete all as specified and directed.
S&F 100 mm long powder coated Aluminium handles, tint existing to match complete all as specified and directed.
S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified
S&F in repair for 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed and specified
S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as directed and specified
S&F in repair cast iron body, door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugaaated steel sheeting/AC Sheet complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugaaated steel sheeting/AC Sheet complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed
S&F Roof trusses (framed), trussed, purlins, crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed (Make : ISI Marked as approved by GE)
M&L for MS work for wind tie in roofs and similar work including securing bolts, drilling hole etc confirming to Fe- 290 Gde E-165 complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for Preparing new steel and iron surface of any description n.exc over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.
M&L for preparing old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coat of exterior emulsion paint (weather coat) with roller as approved including filling the cracks and depressions with putty / POP to make the surface even and smooth matching to the adjacent wall surfaces complete all as specified and directed .
M&L for Preparation of old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller white or tinted as approved complete all as specified and directed.
M&L for Preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Demolition of cement concrete (unreinforced of any description other than ground floor and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for providing cement concrete (1:2:4) Type B0 (using 20mm & 12.5mm graded stone aggregate) as in kerbs, haunching & flooring including necessary formwork rounded or chamfered angles all as directed.
S&F in repair for 4mm thick HPSC pre-prime non absestos fibre cement building board (E-classic) decorative finish fixed to existing Aluminium/GI frame work at any position matching to existing including re-fixing false ceiling lights, electric fittings/fixture etc complete all as specified and directed.
Supply, fixing, connecting and testing in replacement integral LED flood light luminaries, 100 watts at any height ranging from 3m to 16m, with scondary optics made in pressure die cast housing and heat sink in aluminium extrusion with IP66 with mounting bracket and all accessories and connecting the same to electric source with using copper conductor 1.5 Sq mm PVC insulated flexible three core cable , including all accessories and fixing the light fitting to walls/ ceiling etc complete all as specified and directed. Make :- JJETAQUANTOPLUSFLP30WLED757SYSMLENS/Philips/Oshram
All as per above item but 133 Watt complete all as specified and as directed
S&F in repairs recess mounting LED panel 12 W 160mm X 160mm luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover.Make: Bajaj LED Squadra 12 W of Bajaj or eqvt in Wipro/CG
Taking down carefully earth strip alumium of any size and any type from any height (3m to 16 m) of building or hangar ( roof conductor and down conductor) of Lightning protection and refixing the same with necessary insulators complete all as specified and as directed.
All as per above item but Air Termination rod of any size
Taking down carefully any light fitting from ceiling/wall and refixing the same along with necessary wires and fittings complete all as specified and as directed
All as per above item but Celing fan of any make and capacity
Dismantling and taking down the serviceable Air Conditioner of 1.5/2/3 TR indoor and out door unit with voltage stabilizer and refixing the same at directed location complete all as specied and as directed. Note: 1. Proper pumping down of refrigirant is the responsiblity of the contractor. Any topping up of refrigirant gas required is included in the quoted rate, 2. Necessary insulation required for copper pipe is included in the quoted rate.
Taking down carefully aluminum /copper point wiring (light, fan, switch & power) complete including fittings such as switches, ceiling rose, pendent, by unscrewing from board ,out let box, fitting and fixture such as bulk head fitting, sketch fittings and making good the disturbed rurfaces of walls floors etc all as directed.
M&L for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross sectional area, single core, pvc insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No in and including medium grade, PVC Concealed conduit of dia not less than 20mm and conduit accessories concealed in wall, ISI marked with valid CML No (IS-9537-1983 for conduits and IS: 3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes suitable for modular (with earth duly) duly painted with two coats of anticorrosive paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with modular frame plate cover for fixing of switches, sockets etc including PVC insulated multi stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the following : (a) One light/ Fan point controlled by one way switch.
(b ) One 5 Amps switch socket combination on independent board.
(c) One 5 Amps socket on same board with other switches.
All as per above item here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.
M&L for point wiring with stranded copper conductor 1.5. Sqmm 1100 Volts grade FRLS PVC insulated and unsheathed including ISI marked PVC casing capping of required sizes as indicated including all accessories, copper conductor cable 1.5 Sqmm insulated and unsheathed PVC cables as earth wire, suitable for modular terminal boxes closed recossed type. modular frame plates all as required as specified and directed for the following :- (a) One light/ Fan point controlled by one way switch. (Make : Havells/Finolex/Polycab)
(b ) One 5 Amps switch socket combination on independent board.
(c) One 5 Amps socket on same board with other switches.
All as per above item but here in above but 2.5 Sqmm stranded copper conductor and independent board for 15 Amps switch/ socket point as directed.
S&F in repairs modular switch single pole one way 5 Amps 230 V.
S&F in repairs switch socket out let 3 pin 5 Amps modular type 230 Volts multipurpose,
All as per item No-151 above but 5 Amps and 15 Amps multipurpose( 3 Pin 15 Amps and one pin 5 Amps controlled by one switch.)
S&F in repairs fan regulator Electronic Step type (min 5 steps) 2module, 100W ISI marked by removing old u/s resistance type fan regulator including necessary connection in existing laminated switch board by making necessary holes etc., complete all as specified and directed by Engineer-in-Charge.
JAY PRAKASH SHARMA
GWALIOR TRADE LINK
M/s JAY AMBEY CONSTRACTION .CO
M/s Shubham Construction Co.
M/s Jai Durga Construction
M/s Khan Construction
JNK BOND
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .