REPAIR TO JOINERY FLYPROOFING AND OTHER CONNECTED ITEMS AND SMART MAINT AND REPAIRS TO LEAKAGE SEEPAGE TO SUNKON PORTION TOILET BATHROOM PLUMBING WORK ROOF TREATMENT AND TANK CLEANING IN INTERNAL BLDG IN JCOS OR MD ACCN (9115/E8)

Amount

Note :- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs unless otherwise specifically mentioned as "Supply only" or Fixing only" in BOQ . (ii) Makes of material will be approved by GE in writing before commencement of work.

Taking down of chowkats or frames without taking down shutters area not exc 1.50 Sqm, complete all as directed.

-Ditto- All as per item No. 1.00 above but area exc 1.5 Sqm but not exc 4.00 sqm, complete all as directed.

Taking down shutter of any description not exc 1 Sqm each, complete all as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each, complete all as directed.

S&F 35mm thick 2nd class hard wood factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood factory made paneled door shutter (two panels) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces , the size of rail and style as per IS-1003 (part-I) klin seasoned and chamically treated, complete all as specified and as directed.

S&F flush shutters 30 mm thick, solid core construction and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed.

S&F mild steel work as in door frames, cooler stand etc. using MS angle iron cut to shape, drilled and countersunk for screws, incuding bending and welding angles as necessary, conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

M&L for solid PVC door frame of size 50x47mm made out of 5mm thick PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F aluminium anodised handle extruded section of size 150mm long, complete all as specified and as directed.

S&F of aluminium anodized,tower bolt 200mm long, complete all as specified and as directed.

S&F of aluminium alloy anodised sliding door bolt 300mm with hasp and staple (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long, complete all as specified and as directed.

S&F of mild steel butt hinges, 100mm size, complete all as specified and as directed.

S&F of stainless steel butt hinges 100mm size, complete all as specified and as directed.

S&F 100mm size single action door spring hinge, complete all as specified and as directed.

S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm longs.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 Mix (using 20mm graded crushed stone aggregate) as in hold fast iron fixing including necessary form work, complete all as specified and as directed.

Taking down steel window/ventilator including guard bar, complete all as directed.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded with cooler opening and with one shop coat of zinc chromate primer, complete all as specified and directed.

-Ditto- All as per item No. 22.00 above but without glazing bars, complete all as specified and as directed.

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower olts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified and as directed.

-Ditto- All as per item No. 24.00 but without glazing bars, complete all as specified and as directed.

Factory made box type steel ventilator with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.

Factory made box type steel ventilator without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as specified and as directed.

Supply and fabrication of mild steel guard bars and welded to window frames, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint (First quality) over a coat of pink primer on new wooden surface including preparation of surface, over 10cm width or girth, complete all as specified and as directed.

M&L for one coat of synthetic enamel paint (First quality) over old wooden surface including preparation of surface, over 10cm width or girth, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer on new steel surface including preparation of surface over 10cm width or girth, complete all as specified and as directed.

M&L for repair to steel window including taking down replacement of unserviceable hinges device box type handle making them serviceable condition and refixing on same opening making the soffit and jamb good condition, complete all as specified and as directed by Engineer -in -Charge .

M&L for 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint, complete all as specified and as directed.

S&F as in repair providing pre laminted particle board exterior grade (ISI Marked), prelaminated both sides and decorative choice fixed for kitchen cupboard and shelving complete 18 /19 mm thick, complete all as specified and as directed.

S&F continuous hinges mild steel bright finish or electrogalvanised width of flap 30mm, complete all as specified and as directed.

S&F magnetic catches for cabinet of size 50mm complete with striking plate and magnetic stud, complete all as specified and as directed.

S&F 40mm dia cupboards knobs fixed with nuts screw and washer of aluminium anoised, complete all as specified and as directed.

M&L for fabrication of pressed steel cupboard shutters using 0.80mm thick MS plain sheet & with frame 1.00 to 1.25mm thick, bent to shape including two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc as in repair, complete all as specified and as directed.

M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition, complete all as specified and as directed by Engineer -in -Charge .

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) and removing rubbish of the MD Land, complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement, complete all as specified and as directed.

"Supply only" 35mm wide 3mm thick glass dividing strips, complete all as specified and as directed.

M&L 50 mm thick PCC 1:3:6 type C-1 (using 20mm gradde crushed stone aggregate) as in plinth protection laid in bays, finished complete including forming joints in 2 mtr intervals and filled with bitumen mastics, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors,aprons/wall etc., laid, bedded and pointed in any mortar, complete all as directed.

Taking down cement plaster of any description on brick wall or stone masonary or concrete or RCC surfaces, dado surfaces etc complete including racking out joints, hacking for key scrubbing down with water, complete all as directed.

M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface, complete all as specified and as directed.

M&L Rendering 10 mm thick CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc., finished even & smooth, complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc., complete all as specified and as directed.

S&F wire netting galvanised steel wire cloth 0.91 nominal dia and 12mm mesh lathing and fixed to ceiling including all gaps cutting and waste fixed with nails on ceiling, complete all as specified and as directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles (premium quality) 300 x 300 x 6mm in floors set and jonted in neat cement slurry and pointed in coloured / white cement to match in and including 15mm thick cement mortar screed in CM 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for glazed coloured ceramic tiles (premium quality) 300 x450 x 7mm thick as in dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for joint free non skid colour ceramic tiles (premium quality) of size joint free area exc 0.11 sqm but nexc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for colour ceramic tiles of size joint free area exc 0.11Sqm but not exc 0.18Sqm as in skirting / dado (vertical surfaces) set and jointed with neat cement slurry and pointed with white cement including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

M&L for non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. Make : Kajaria/ Somany/ Johnson as approved by GE.

-Ditto- All as per Item No. 55.00 above but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L for Machine cut kota, stone slab flooring 18-20mm thick as in floor over 15mm thick screed bed in CM 1:4 base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of stone or tiles laid bedded and pointed in any mortar, complete all as specified and as directed.

M&L for 18-20mm thick Kota stone slabs as in skirting, risers of steps & other vertical surfaces etc., including 10mm thick rendering in CM 1:4 as backing coat, complete all as specified and as directed.

M&L for 15 to 20mm thick, machine cut, Udaipur green marble/granite (any type work table rubbed and polished) as in cooking platform steps, jambs etc including laid over 15mm thick cement screed bed in CM 1:4 Including cutting and rubbing grinding and granite polish (Mirror image finish), complete all as specified and as directed by Engr-in-Charge.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in flooring, path, foundation etc., complete all as specified and as directed.

S&F machine made precast concrete interlocking paver block, any shape and size Confirming to IS-15658-2006, coloured rubberised, 60mm thick M-35 Grade with 6mm top layers of ante abrasive material laid over and including 25mm thick sand cushion complete. The interlocking joints shall be filled with fine sand, complete all as specified and as directed.

S&F Providing and laying at or near gound level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required, complete all as specified and as directed by Engr-in-Charge.

M&L for chequered cement concrete tiles (premium quality) 30 x 30 x 2.5cm thick set and jointed in neat cement slurry in floor over & including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as directed.

Supply and fabricated of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and anging; also fastening and fixing, complete all as specified and as directed.

Demolition of stone slabs laid dry jointed & pointed as in shelves, sunshades etc., complete all as directed.

M&L for sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc., not exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 35-45mm, complete all as specified and as directed.

M&L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc., complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceilling and applying three coats of white wash, complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying two coats of putty with fair finished and even surface and applying two coat of oil bound distemper complete (including applying sand paper for finished the surface), complete all as specified and as directed.

M&L preperartion of old plastered surfaces of wall and applying one coat of white wash, complete all as specified and as directed.

M&L Preparing of old plaster surfaces and applying one coat of oil bound distemper on wall, complete all as specified and as directed.

Preparation of old surfaces of wall by Brooming down or steel wire brushing, scrapping down mass and efflorescent salts and trading oil & greasy spots, washing rubbing down and stopping surfaces and applying two coats of wall care putty to finished the surface and applying two coat of oil bound distemper, complete all as specified and as directed by Engr-in-Charge.

S&F SS Fancy type chrome plated decorative, curtain rod 25mm dia including brackets, fancy type knob, clips, complete all as specified and as directed.

Taking down or up steel / PVC tubing and connection including cleaning for refixing or removal to store, complete all as directed. (a) 25 mm dia

(b) 20 mm dia

(c) 15 mm dia

S&F of GI water tubing, medium grade, galvanized, with all fittings fixed to wall, complete all as specified and as directed. (a) 25 mm dia,

(b) 20 mm dia

(c) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Demolition Concrete (un reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:3 using WPC @ 3% by weight of cement or as per manufacturers instruction, complete all as specified and as directed. Note : WPC shall be measured and paid seperately.

"Supply only" water proofing compound (ISI Marked), complete all as specified and as directed.

M&L for 75mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) to use in subbase of floors of sunken portion laid in slope 1:40 to the surface of RCC slab shall be made even and smooth without using extra cement when concrete is still green, complete all as specified and as directed by the Engr- in -charge.

M&L for applying one coat of cold emulsion bitumenous primer @ .25kg/sqm shall applied on plastered surface including side walls. There after a layer of APP membrane 1.5mm thick as specified above shall be laid by torch application method as per manufacturer instructions, complete all as specified and as directed.

M&L for PCC lean cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) in mass concrete after carrying out satisfactorly testing of CI pipes/PVC pipes joints and slab walls by filling water for 72 hrs, sunken portion of nahani trap/floor trap and pipe joints shall be embeded in PCC 1:3:6 type C-1, complete all as specified and as directed.

S&F 32 mm dia bore light grade galvenised steel water tubing provided 30cm beyond wall surface to drain out leakage if any. The mouth of GI pipe shall have Gravel to avoid chocking. The top of sunken portion of RCC slab to be finished such that its slope towards spout, complete all as specified and as directed.

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest including 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe and other accessories etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repairs vitreous china wash down water closet Anglo Indian Type Semi-pedestal pattern with seat & cover with jet spray complete incl fixing of flush pipe etc., complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repairs Vitrous china wash basin as in repairs, white flat back size 450x300 mm including, waste fittings, waste pipe, MS brackets, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repairs Vitrous china wash basin, white flat back size 550x400 mm including, waste fittings, waste pipe, MS brackets, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

S&F as in repair PVC low level flusing cistern 10 ltrs capacity with float valves white with inlet ball valve including float ball and includign PVC connection, complete all as specified and as directed. Make : Hindware/ Parryware/ Cera as approved by GE.

Replacement of internal flushing cistern fitting (accessories kit) for low level. Make as per existing fitting, complete all as specified and as directed.

S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified and as directed.

S&F in repair 15mm size PVC connection with PTMT nuts 450mm length, complete all as specified and as directed.

S&F as in repairs fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm dia bore pipe, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7037 or equivalent in Kohler/ Cera as approved by GE.

S&F as in repairs long arm CP Bib tap 15mm bore fancy type, complete all as specified and as directed. Make : Jaquar Cat No. CON 107KN or equivalent in Kohler/ Cera as approved by GE.

S&F as in repairs fancy type, chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia pipe, complete all as specified and as directed. Make : Jaquar/ Kohler/ Cera as approved by GE.

S&F as in repairs of Angular stop cock, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 20 mm dia, complete all as specified and as directed. Make : Jaquar Cat No. CON-053KN or equivalent in Kohler/ Cera as approved by GE.

S&F as in repairs of Concealed stop cock regular body with adujstable wall flange with fancy type chromium plated with (concealed type) 15mm dia, complete all as specified and as directed. Make : Jaquar Cat No. CON-083KN or equivalent in Kohler/ Cera as approved by GE.

S&F in repair chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed minimum weight 15 mm 90gm/each, complete all as specified and as directed. Make : Prayag/ Commander/ Polytuff as approved by GE.

S&F fancy type Pillar cock, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm dia bore, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7011 or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs of chromium plated Swivel joint shower rose of 100 mm dia fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 200mm long with bend of 45degree with flange, complete all as specified and as directed. Make : Jaquar Cat No. OHS-1709 & SHA-483 or equivalent in Kohler/ Cera as approved by GE.

M&L Stainless steel sink, 0.60 mm thick for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair, complete all as specified and as directed. Make : Nirali/ Jayna/ Blue Star as approved by GE.

S&F in repair stainles steel sink with drainage board 0.60 mm thick for kitchen, with plug, waste pipe, washers including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx 330mmx160mm, complete all as specified and as directed. Make : Nirali/ Jayna/ Blue Star as approved by GE.

S&F in repair for Kitchen plate rack made out of stainless steel 0.50 mm thick of size 750x600x200 mm with partition, complete all as specified and as directed. Make : Nirali/ Jayna/ Blue Star as approved by GE.

Demolition of existing RCC tank on roof and removing from site of capacity exceeding 300 litr but not exc. 500 litr and making good the distrub surface by providing 100mm thic platform of required size for water storage tank with PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) over roof slab and finishing exposed cement concrete surface with 15mm thick plastering in cement mortar 1:4 and S&F rotational moulded polythene water storage tanks white colour, triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank lid cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F in repair 500 Ltr cap, rotational moulded polythene water storage tank, white colour, triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I including tank lid cover complete with fixing arrangement, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F in repair 1000 Ltr cap, rotational moulded polythene water storage tank white colour, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I including tank lid cover complete with fixing arrangemen, complete all as specified and as directed. Make : Sintex/ Rotex as approved by GE.

S&F ball valves 20mm dia bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 200mm-210gms), complete all as specified and as directed.

Cleaning and removing all scale and dirt etc., from over head water tanks and from mouths of circulating pipe etc., including dismantling & refixing at same or other place of capacity exc 250 ltrs but not exc 500 ltrs, complete all as specified and as directed by Engr-in-Charge. Note :- Accessories damaged during the cleaning of tank shall be replaced by the contractor at his own arrangement and will not be paid by the department

Cleaning and removing all scale and dirt etc., from over head water tanks and from mouths of circulating pipe etc., including dismantling & refixing at same or other place, of capacity exc 500 Ltrs but not exc 1000 Ltrs, complete all as specified and as directed.

Demolition of existing water proofing Treatment including PCC padding etc and cleaning roof surface etc preparing the surface to receive plaster /PCC by brushing with wire brush and fanning the surface to remove all loose dirt etc., complete all as directed.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/undulation to make the existing as filling in depression of roof slab, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof kerb including weathering, slightly rounded or chamfered angles and throating, as directed etc., complete all as specified and as directed.

M&L for roof treatment in the following stages, complete all as specified and as directed :- (a) First Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturer instructions (Note: - WPC shall be measured and paid separately). (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS-3384 @ 0.30 ltr/Sqm. (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm. (d) Fourth Course : A layer of APP membrane (polymeric membrane) centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm. (e) Fifth Course : A coat of binding material using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm. (f) Sixth Course : 40mm thick PCC 1:2:4 padding, well compacted (using 20mm graded crushed stone aggreegate) with groovs shall not be exceeding 1.40 Sqm

S&F PVC Flexible waste pipe 32mm to 40mm dia with socket for steel sink/WHB upto floor level and length not less than 0.85 Mtr, complete all as specified and as directed.

S&F 15mm bore bib tap, two way, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. Make : Jaquar Cat No. QQT 7041 or equivalent in Kohler/ Cera as approved by GE.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats ( minium weight 300 gram, size 450x125x25mm), complete all as specified and as directed.

S&F in repair health faucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve/cp tap, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat No. ALD-573 or equivalent in Kohler/ Cera as approved by GE.

S&F in repairs plastic water closet seat cover, white, closed patteren, with flat bottam and cover and mild steel chromium plated or aluminised hinges device PVC seat cover for water closet, complete all as specified and as directed.

S&F of CP mild steel grating with or without hole 125 mm dia as in repairs, complete all as specified and as directed.

Taking down steel window/ventilator including guard bar, complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames, complete all as specified and as directed.

S&F of Aluminium alloy, anodised, sliding door bolt 16mm dia & 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed.

S&F Prelaminated particle board 18/19mm exterior grade including knobs,hinges and wood scantling as in cup board, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins & spring clips, complete all as specified and as directed.

S&F thick 3mm sheet glass ordinary quality, and glazing with oil putty in squares not exc.0.50Sqm in each pane, complete all as specified and as directed.

S&F in repairs 4mm thick figured glass panes pin headed type, complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth of 0.40mm nominal dia of wire and 1.20mm average width of aperture fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth, 0.40mm nominal dia of wire and 1.20mm average width of aperature fixed with and including palin MS flat iron with galvanised wire stapples with and including necessary welding, nut bolt etc., as in steel window or door, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint (Ist quality) over a coat of red oxide primer on new steel surface including preparation of surface over 10cm width or girth, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed on wall with MS clamp, complete all as specified and as directed by Engr-in-Charge

S&F PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm, complete all as specified and as directed.

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75 mm, complete all as specified and as directed.

-Ditto- All as per item No. 145.00 above but fixed in wall, complete all as specified and as directed.

S&F PVC (SWR) branch pieces single socketed "Y" equal or unequal 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm, complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia with oval acess door, complete all as specified and as directed.

S&F PVC SWR vent cowl 110mm, complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm, complete all as specified and as directed.

S&F 75 mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

S&F 110mm PVC SWR junction (T) with acces door equal or unequal, complete all as specified and as directed.

Demolition of brick work, PCC block ,stone masonry built in cement mortar, complete all as specified and as directed.

M&L for square rubble walling, Jodhpur type, regular coursed, well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and as directed.

-Ditt- All as per item No.155.00 above but except stone, complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing, complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified and as directed.

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3, complete all as specified and as directed.

M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition, complete all as specified and as directed by Engineer -in -Charge .

M&L for PCC solid block 10 cm thick 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar 1:6, complete all as specified and as directed.

S&F Gun-metal, globe or gate valves (ISI Marked), with iron wheel head, screwed both ends for iron pipe and fixed to 15/20mm dia bore pipe, complete all as specified and as directed.

Note :- (i) Contract Sum shall be arrived at after deduction of amount of Schudule of Credit.

Narendra General Suppliers

M/S KAUTILYA GARG

JB INFRA

SURESH TRADERS