Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹34.9 L+₹1.3 L (3.87%)Rejected-AOC | L2 | Rejected-AOC Reject being other than lowest | |
| 3 | L3₹34.9 L+₹1.3 L (3.88%)Rejected-AOC 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L3 | Rejected-AOC Reject being other than lowest | |
| 4 | L4₹35.0 L+₹1.4 L (4.11%)Rejected-AOC 145 SAINIK NAGAR RAIBARELLI ROAD TELIBAGH LUCKNOW | L4 | Rejected-AOC Reject being other than lowest | |
| 5 | L5₹35.2 L+₹1.6 L (4.69%)Rejected-AOC | L5 | Rejected-AOC Reject being other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE West Lucknow
GE West Lucknow, 11 SP Marg, Lucknow Cantt- 226002
WELCOME MAINT AND COMPREHENSIVE SERVICES AT NIRBHAY VIHAR, CHATAK LINE, KIRANTI LINE, MAN BAHADUR ENCLAVE AND PERIODICAL SERVICES AT 11 GRRC COMPLEX, CAMPBELL LINE, CHETAK LINES, KRANTI LINE AND MEPTA AREA OF AGE B/R-I UNDER GE (WEST) LUCKNOW
2022_MES_561906_1
GE/W/LKO/68 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Lucknow
As per NIT and tender documents
9 documents required · 9 mandatory
₹500
GE West Lucknow
₹1 L
Yes
16 Jan 2023
7 Nov 2022
7 Dec 2022
7 Nov 2022
5 Dec 2022
21 Nov 2022
7 Nov 2022 - 14 Nov 2022
Amount
Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.
M&L for brick work with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed..
Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L 15 mm thick rendering in CM 1:6 on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M & L 15mm thick rendering in CM 1:4 on rair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. Including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.
M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. Including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified directed by Engr-in-Charge
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed or in cement & sand mortar 1:6 etc, complete all as specified and as directed.
Material and Labour for coloured glazed ceramic tiles 300 x 200 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter 1:4 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick screed bed in cement & sand mortar 1:4, complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete . all as specified and as directed.
M & L for vitrified tiles 10mm thick light shade square polished, area of each tiles not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over &including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M & L for vitrified tiles 10mm thick light shade square polished, area of each tiles not exc 0.36 sqm on vertical surfaces such as skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over &including 10 mm thick screed bed in cement & sand mortar 1:4, complete all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar complete all as specified and directed.
M & L for 18-20mm thick granite work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing complete over and including 20mm thick screed bed and bedding layer of mortar for laying floor finishes with (1:6) cement mortar complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and directed.
Dismantling wall and ceiling boards any thickness including cover fillets etc complete all as specified and directed.
S&F 4mm thick Non asbestos fibre cement building boards fixed in GI frame work as in ceiling, flat or sloppy as per manufacturer's instrucitons complete all as specified and directed.
M&L preparation of new surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.
M&L 6mm thick non asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L type or J type or cranck hook complete all as specified and directed.
M & L for Asbestos cement serrated ridge for corrugated or semi corrugated sheets complete all as specified and directed.
S&F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed.
S&F for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) Plain sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F steel work in tabular trusses including special shaped washer etc. complete using ERW or induction butt welding tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.
M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm screed bed bedding layer in CM 1:6 complete all as specified and directed.
M&L for machine cut kota stone slab flooring 18-20mm thick in riser to step etc, skirting, dado, pillar laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.
S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
All as per item No 32 above but excluding snap grid complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4, type B-1 using 20mm graded crushed stone aggregae as in floors, finished even and smooth using extra cement, complete, all as specified & directed.
Supply only glass dividing strips 38mm wide and 3mm thick and inserted in position all as specified.
M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement including demolition of cement concrete in plinth protection ground floor complete all as specified directed Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).
S&F in repairs long body 15mm bore bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repair fancy type pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm dia complete all as specified and directed.
S & F in repair for CP stop/angle valves fancy type chromium plated 15mm bore brass, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified and directed.
S & F in repairs two way cock/two way angle cock with wall flange matt chrome finish complete all as specified and directed.
S&F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with reound spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed.
Supply and fixing in repair 15mm bore for CP wall mixer for mixing hot or cold water screwed down iron pipes complete all as specified and directed.
S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.
Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S & F in repairs 32 mm bore Brass chromium plated bottle trap for wash basins with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S & F in repairs Brass spindle for bib cock/stop cock complete all as specified and directed.
S & F in repairs Brass spindle for bib cock/stop cock fancy type of make Jaquar/parryware complete all as specified and directed.
S & F in repairs Brass spindle for Concealed stop cock any type or pattern complete all as specified and directed.
S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.
S & F in repair Flush syphon Kit for any respective pattern for low level flushing cistern any description complete all as specified and directed.
S & F in repair Bib taps15mm standard of PTMT any colour, high presure, screwed for iron pipe and fixed (Min wt-15mm-90gms) complete all as specified and directed.
S & F in repair glass corner shelves fancy type 10mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Supply and fixing in repairs PVC connections 450mm long, 15 mm size with PTMT nuts at ends complete fixed in repair complete all as specified and directed.
S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.
S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.
S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed.
S & F in repair EWC vitreous china padestal pattern Anglo Indian with seat cover white including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe etc, complete all as specified and directed.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.
S&F in repair vitreous china bowl type urinal flat back size of 465x355x265mm white with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1: 4 complete all as specified and as directed.
Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Supply and Fixing in repair stainless steel kitchen plate rack made out stainless steel of not less than 1mm thick sheet of size 900mm x 600mm x 200mm of approved pattern complete all as specified and directed..
S & F in repairs PVC coloured bath cabinet, overall size 560x410mm decorative design with looking mirror including all fittings complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to faciliate demolition) complete all as specified and directed.
M & L for Providing Precast Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab (for manholes etc) set in CM 1:4 including necessary form work complete all as specified directed.
S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S and F in repair PVC flexible waste Pipe, 32 mm bore for WHB /Sink complete all as specified and directed.
S & F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.
S & F in repair of plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm and not exc 4.00 Sqm each, complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete, all as specified and directed.
Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed.
Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but not exc one brick complete all as specified and directed.
M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.
M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in roof kerbs, benching, coping, padding, kneelers iincluding demolition of PCC in padding above ground floor and paving n. exc 15cm thick complete all as specified and directed
S & F Bands, straps, supports or stays for rain water ventilating pipes including bolts if required, hooks for large gates, hook and pintel hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, palin angle cleat for securing purlin to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 complete all as specified and directed.
S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Supply and fixing in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed
S&F PVC solid door frame of size 50x47mm made out of 5mm thick plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.
S&F 30mm thick PVC factory made panneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings.
S & F Rubber beading size 65x5mm for doors complete all as specified and directed.
S& F in repair 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.
S & F 0.9 mm thick sunmica/laminaton with decorative lamination fixed with synthetic Glue / Adhesive to timber frame/wood work, edge chamfered as directed complete all as specified and directed.
S&F continuous (Piano)) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed.
S&F butt hinges of size 100 mm medium weight, Mild steel ISI marked complete all as specified.
S & F stainless steel Butt hinges "medium weight" bright finish 100mm size complete all as specified and directed.
S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 75mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.
S&F aluminium handle, 100mm size, cast type, anodized (ISI marked) complete all as specified.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.
S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified.
M & L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
S&F 500 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old tank. complete all as specified and directed.
S&F 2000 litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old tank. complete all as specified and directed.
S & F in repair PVC tank cover with locking arrangement for 500 / 1000 ltrs water tank complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc exc 250 & n.exc 500 ltrs capacity and writing date of cleaning using synthetic enamel paint all as specified and directed.
S & F in repair 15mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
S & F in repair 20mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
S & F in repair 25mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.
Taking down eaves gutters and rain water pipes any size or pattern including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.
S & F PVC(SWR) bends 110mm dia complete all as specified and directed.
S & F PVC(SWR) bends 75 mm dia complete all as specified and directed.
S & F in repairs CP tubular towel rod, 20mm dia, "D" type, 60cm long between flange complete all as specified and directed.
S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.
S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed.
S & F in repair Soap dish CP any size complete all as specified and directed..
S & F in repair stainless steel grating doom 100mm dia complete all as specified and as directed.
S & F in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed.
Supply and Fixing in repairs 100 mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and laid under floors fixed to walls complete all as specified and directed.
Supply and Fixing in repair 75mm bore cast iron sand cast soil waste and vent pipe in any length with or without ears with cement joints and laid in trenches or under floors complete all as specified.
S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed.
S & F cast iron bends (any radius) diminishing pieces or tapers for 75mm dia complete all as specified and as directed.
S & F cast iron door bends (any radius) ovel access door diminishing pieces or tapers for 75mm dia complete all as specified and as directed.
S & F cast iron door bends (any radius) ovel access door diminishing pieces or tapers for 100mm dia complete all as specified and as directed.
S&F in repair 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete, all as specified.
S & F in repair 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.
S & F in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.
S & F in repair 200mm aluminium anodized barrel tower bolts of extruded section all as specified and directed.
S & F in repair plain Aluminium sheet 0.56mm thick fixed with nails to wooden shutters complete all as specified and directed.
S & F in repair 150mm aluminium anodized barrel tower bolts of extruded section all as specified and directed.
S & F in repair 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.
S & F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
S & F in repair Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.
S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller or roller plate complete all as specified and directed.
S & F in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.
Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.and directed.
S & F 3mm thick plain sheet glass ordinary quality incl glazing with putty in square area not exc 0.5 sqm in each pane complete all as specified and directed.
S & F in repair Aluminium (die cast) body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
Complete removal of existing treatment on wall/roof projections and applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed.
Complete removal of existing treatment on wall/roof projections and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and directed.
M & L for preparation of newly plastered untreated surface of wall applying two coats of oil bound distemper over a coat of birla putty complete all as specified and directed
M & L for preparation of old treated surface of wall/roof projections including facia, cornices etc and applying a coat of weather proof exterior emulsion paint complete all as specified and directed.
M & L for preparation of old treated surface of roof and applying a coat of weather proof exterior emulsion paint complete all as specified and directed.
M& L for painting building plaque with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but not exc 0.4 sqm each complete all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M & L for prepration of old treated surface of wall and applying one coat of white wash complete all as specified and directed.
M & L for prepration of old treated surface of wall and applying two coats of white wash complete all as specified and directed.
M & L for prepration of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.
M & L for prepration of old treated surface of ceiling and applying two coat of white wash complete all as specified and directed.
M & L for preparation old treated surface of wall and applying one coat of cement base paint complete all as specified and directed.
M & L for preparation old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.
M & L for preparation of old treated surface of wall and applying two coat of oil bound distemper complete all as specified and directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.
M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint complete all as specified and directed.
Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying 2mm thick wall care putty over prepared surface to acheve the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & Fungal rsistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed . Note : Primer & acrylic emulsion to be carried out through air less spray machine (Mechanical means) in any height.
Material and Labour for complete removal of existing treatment of wall surface with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying minimum 2mm thick wall care putty over prepared surface to achieve surface even and smooth and applying two coats of plastic emulsion paint including primer on surfaces of walls complete all as specified and directed. Note : Plastic emulsion paint to be applied through mechanical means only on wall surfaces and maximum height of wall upto 8mtr.
M/s Sachkhand Traders
M/S Reliance Construction
M/S KAUSHIK CONSTRUCTION
ANIL CONSTRUCTION
M/S Sunil Steel Works
Sanjai sales and services
M/S Vindhya Infraventures
M/s Chandra Mohan and Sons
M/S vastu construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .