Electrification electric Sub Station Building at District Court Complex MelongThang Leh

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

3 pin 5/6 A socket outlet

15/16 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with onnections, testing and commissioning etc. as required. Single pole 6/16 amp.

Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia GI pipe ISI marked and 3 meter length, with 40mm x 5mm thick electrode, the electrode3 should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact between the electrode and compound should be eco-friendly GI Electorde Earthing should be maintinance free and does not require regular manual addition of water. The earthing pit should be covered with PVC cover.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Fabrication, Supplying, installation testing and commissioning of following pannel made out of 2mm thick M.S. sheet, wall mounted, vermin & dust proof, outdoor type with lockable type hinged doors, duly painted with provision for fixing of I no incomer, MCCB type change over switch-1 No including supply and fixing 2 set of Aluminium Bus bar, and strip for housing MCB,s 12 Nos, MF Digital Meter and other allied accessories as required.(Make as per annexure)

Supplying and fixing following rating and breaking capacity and pole MCCB witrh thermomagnewtic release and terminal spreaders in existing cubicial panel board including dsrilling holes in cubical panel, making connections, etc as required. MCCB FP 6.3 Amp 16 KA

Change over Swiitch ( on Load ) FP 63 Amp

Supplying and fixing of following rating 240/415 Vpolt's "C" Series miniature circuit btreaker suitabe for lighting and other loads of following poles in the existing NCB DB complete with connection, testing and commissiong ( Above to 32 Amp.) SPN 63 Amp

Supplying and fixing iof 1.1 KV PVC insulated and PVC sheated XLPE Aluminium power cable of following sizes on surface/ surface cable tray/0.50 mtr below ground level etxc. As required includin g carriage upto site of work.(Make as per annexure enclosed) 16 sqmm 4 core-Armoured

Supplying and fixing of 120 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet/ wall Wipro LR02-132-XXX-57-G2 or equivalent approved make.

10 watt LED tube light fitting LL20-111-XXX-65NEs wipro or equivalent.

20 watt LED tube light fitting. LL20-221-XXX-65BE3 of wipro or equivalent make and model Philips/Crompton Greaves.

Exhaust fan 300 mm size (Heavy duty) CG transair or wquivalent approved make

Exhaust fan 225 mm PVC shutter type.

M/S SHAHID IQBAL