REPAIRS AND EXTENSION OF BAGGAGE SCANNER ROOM AND CHECK IN COUNTER AT 30 GATE OF AERODROME AREA

HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRPORT SERVICES CENTRE

NAME OF THE WORK: “Sub: REPAIRS AND EXTENSION OF BAGGAGE SCANNER ROOM AND CHECK IN COUNTER AT 30 GATE OF AERODROME AREA, HAL (BC). Cont. No: ASC/CIV-01/23-24"

NOTE: REFER TENDOR DOCUMENT

HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRPORT SERVICES CENTRE

NAME OF THE WORK: “Sub: REPAIRS AND EXTENSION OF BAGGAGE SCANNER ROOM AND CHECK IN COUNTER AT 30 GATE OF AERODROME AREA, HAL (BC). Cont. No: ASC/CIV-01/23-24"

Name of the Tenderer: x

Sl. No Specification Quantity Unit Rate in Figs [Including GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Demolition of SSM/brick work built in Cement Mortar of any description including removing the debris to a distance exc. 1500 mtrs but not exc. 5000mtrs and depositing where directed. 5.00 Cu M 1205.80 Rupees One Thousand Two Hundred Five and Eighty Paise Only 6029.00

2 Demolition of concrete in flooring of any description including dismantling etc icluding disposing the same to a distance of upto 1.50km and complete as directed by Engineer In Charge. 15.00 Cu M 2361.64 Rupees Two Thousand Three Hundred Sixty One and Sixty Four Paise Only 35424.60

3 Dismantling existing steel windows at all floors of the existing ATC Building at any height including Scaffolding where ever necessary etc complete. 150.00 Kgs 6.38 Rupees Six and Thirty Eight Paise Only 957.00

4 Dismantling of Tiles of any description and thickness in floors and walls etc., complete 20.00 Sq m 68.41 Rupees Sixty Eight and Forty One Paise Only 1368.20

5 Earth Work Excavation over areas not exceeding 1.5m deep in all kinds of soils of soft/hard soils for foundations etc., including clearing of grass,shrubs and getting out.etc., complete and as directed by EIC. 15.00 Cu M 393.22 Rupees Three Hundred Ninety Three and Twenty Two Paise Only 5898.30

6 Removing /Transporting surplus excavated earth including debris,vegitationwaste etc to a distance exceeding 250m but not exceeding 500 m and depositing ,spreading and levelling etc., complete and as directed by EIC. 10.00 Cu M 359.64 Rupees Three Hundred Fifty Nine and Sixty Four Paise Only 3596.40

7 Returning,refilling including spreading, levelling, watering and well ramming in layers not exceeding 25 cms.,in excavated portions,trenches etc complete as directed by EIC. 5.00 Cu M 154.40 Rupees One Hundred Fifty Four and Forty Paise Only 772.00

8 Supplying, mixing and placing cement concrete (1:4:8) using 40mm graded granite aggregate in foundations thickness for floorings as required including consolidation, curing, formwork etc., complete for bed concreting. 5.00 Cu M 6086.24 Rupees Six Thousand Eighty Six and Twenty Four Paise Only 30431.20

9 Supplying, mixing and placing cement concrete (1:2:4) using 20 mm graded granite aggregate including finishing smooth, necessary form work, consolidation, scffolding, curing etc., for plinth, copings,BED BLOCKS etc., complete. 1.00 Cu M 10277.93 Rupees Ten Thousand Two Hundred Seventy Seven and Ninety Three Paise Only 10277.93

10 Providing laying RCC (1:2:4) using 20mm graded granite aggregate including necessary consolidation, curing etc., complete for the following. (Formwork & Reinforcement will be paid seperately). 0.00

a Beams & Lintels 9.00 Cu M 9087.80 Rupees Nine Thousand Eighty Seven and Eighty Paise Only 81790.20

b Chajjas 0.35 Cu M 9515.25 Rupees Nine Thousand Five Hundred Fifteen and Twenty Five Paise Only 3330.34

c slabs 10.00 Cu M 8296.25 Rupees Eight Thousand Two Hundred Ninety Six and Twenty Five Paise Only 82962.50

d Columns,pillars etc 6.00 Cu M 9581.19 Rupees Nine Thousand Five Hundred Eighty One and Nineteen Paise Only 57487.14

11 Providing form work for concrete work with required wooden planks, runners / MS sheet centering, supports, bracings, struts, wedges, bolts, nuts and washers, scaffolding, dressing with oil, temporary opening for stops, chamfered edges internal and external splayed or rounded angles or grooves for forming throating etc., including removing the same from the site after completion of work as directed by EIC. 0.00

a for suspended slabs landings upto 200mm thick 60.00 Sq m 549.74 Rupees Five Hundred Forty Nine and Seventy Four Paise Only 32984.40

b for beams,lintels etc 25.00 Sq m 513.71 Rupees Five Hundred Thirteen and Seventy One Paise Only 12842.75

c for columns,pillars 30.00 Sq m 663.87 Rupees Six Hundred Sixty Three and Eighty Seven Paise Only 19916.10

12 Supplying, fabricating and placing reinforcement steel TMT bars including necessary bending,cranking,hooking at the ends cut to length as per design and drawings including binding with mild steel wire (soft drawn) of 0.9mm dia for rods 10mm and and over etc., complete. 850.00 Kgs 91.67 Rupees Ninety One and Sixty Seven Paise Only 77919.50

13 Supplying, fabricating and placing reinforcement steel TMT bars including necessary bending,cranking,hooking at the ends cut to length as per design and drawings including binding with mild steel wire (soft drawn) of 0.9mm dia for rods 6mm to 8mm dia. etc., complete. 450.00 Kgs 93.85 Rupees Ninety Three and Eighty Five Paise Only 42232.50

14 Supplying and fixing standard fixed steel ventilators of approved design manufactured by ISI approved manufacture with steel sections conforming to IS 1361 joints. 1.00 Sq m 1923.20 Rupees One Thousand Nine Hundred Twenty Three and Twenty Paise Only 1923.20

15 Brick work with table moulded bricks built in cement mortar (1:6) for foundation, basement, superstructure etc., at all levels for 23 cms thick walls including racking out joints 10mm deep scaffolding, curing etc., complete (Brick conforming to class-B designation 35 of IS 1077) 15.00 Cu M 5411.25 Rupees Five Thousand Four Hundred Eleven and Twenty Five Paise Only 81168.75

16 Brick work with table moulded bricks built in cement mortar (1:4) for basement, superstructure etc., at all levels for 11.5 cms thick walls including racking out joints 10mm deep scaffolding, curing etc., complete (Brick conforming to class designation 35 of IS 1077/class B) 2.50 Sq m 746.57 Rupees Seven Hundred Forty Six and Fifty Seven Paise Only 1866.43

17 Cement Mortar (1:6) plastering 15mm thick for internal walls including smooth finishing with lime rendering etc., complete. 150.00 Sq m 315.78 Rupees Three Hundred Fifteen and Seventy Eight Paise Only 47367.00

18 Cement Mortar (1: 4) plastering 15 mm thick for external walls including finishing smoothly etc., complete. 125.00 Sq m 292.10 Rupees Two Hundred Ninety Two and Ten Paise Only 36512.50

19 Supplying and fixing dark shade VITRIFIED ceremic tiles 10mm thick of approved design,size square /rectangularpolished and area of tile not exceeding 0.36 sq.M and colour jointed with C.M.(1: 6) and pointed coloured cement to match the tiles including over a screed of C.M.(1: 6) 20mm thick bedding,curing etc., complete all as directed by the EIC etc., complete. 90.00 Sq m 1645.24 Rupees One Thousand Six Hundred Forty Five and Twenty Four Paise Only 148071.60

20 Supplying, Fixiing & installing structural glazed panelled panes with 12mm thick plain floating fitted in openings of minimum size 2.0X2.10 m firmly fixed in order,glass gap less joints with butterfly hinges with all necessary brackets,beadings of approved manufacture including filling the joints/gas with relevant epoxy gel, scaffolding etc complete and as directed 57.00 Sq m 2500.00 Rupees Two Thousand Five Hundred Only 142500.00

21 Supplying fabricating and installing glazed aluminium WINDOWS sliding type triple track with star lock arrangement for shutters frame of anodised aluminium extruded rectangular hollow tubes from high grade H.E 9 W.P alloy conforming to designation 63400 of IS 737 of 'JINDAL', 'INDAL' or other approved equivalent manufacture comprising of the following for the aluminium section of anodisation 15 micron or above for all subsection including mullion,styles,rails and clips and all complete with rubber gasket,beadings etc., complete and as directed by EIC 4.00 Sq m 3500.00 Rupees Three Thousand Five Hundred Only 14000.00

22 Painting the exterior surfaces of walls,vertical surfaces/dadoos with two coats of snowcem or other approved equivalent cement paint of approved shade and manufacture including preparation of surface curing, mixing including necessary scaffolding,etc complete. 125.00 Sq m 75.81 Rupees Seventy Five and Eighty One Paise Only 9476.25

23 Painting with two coats of oil bound distemper of approved manufacture and shade,applied evenly to give a uniform finish over and with a coat of approved primer including necessary scaffolding curing etc complete. 0.00

a Inner walls. 100.00 Sq m 86.36 Rupees Eighty Six and Thirty Six Paise Only 8636.00

Sub-Total (Including GST) Rupees Nine Lakh Ninety Seven Thousand Seven Hundred Forty One and Seventy Eight Paise Only 997741.78

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 997741.78 ABOVE % 997741.78

The above Rates includes 18% GST

Grand Total (Including GST) Rupees Nine Lakh Ninety Seven Thousand Seven Hundred Forty One and Seventy Eight Paise Only 997741.78

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE