Provn of bathroom with toilet, Provn of toilet and Special repair to Bldg No. P-328 and Provn of certain sanctioned works under GE NORTH MAMUN

Amount

Excavation in trenches not exc.1.5 wide and n. exc. 1.5 mtr in depth for foundation, cable, pipes etc in any type of soil type and getting out .

M&L for cement concrete (1:4:8 type D2 using 40mm graded aggregate) as in foundation filling and mass concrete

Returning filling in including spreading leveling watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removal of surplus spoil to a distance n. exc 50 mtr and depositing on a level 1.5 m above the starting point.

M&L Brick work with Fly ash bricks in old size bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) all as spd and directed

M&L Rendering 10mm thick internal cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd and directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L for two coats of cement base paint to newly plastered surfaces including priming with alkali-resistant priming paint & preparation of surfaces all as specified and directed by Engr-in-charge.

M&L Rendering 5mm thick cement plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.

M&L 25mm thick PCC, type B-1 (20mm graded aggregate) in sub base flooring complete all as specified and directed.

M & L screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. all as spd and directed.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection, 50mm thick and finished even and smooth without using extra cement all as spd and directed.

Formwork to edges of concrete flats, treads, break in floors, window cills, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 10 cms but n exc 20 cms wide for rough finished surfaces.

M & L for RCC 1;2:4 tye B-1 using 20 mm graded crushed steon agg as in slabs supported on walls, lintel band/ beams and columns in floros, roofs, landings balconies, canopies, dech slabs and in shelves and the like complete all as spd & directed.

S & F TMT bars 6mm to 8mm dia cut to length, bent to shape required incl crancking bending and hooping ends for stirrups all as specified and directed.

S & F TMT bars 10mm dia and over cut to length, bent to shape required incl crancking bending and hooping ends all as specified and directed.

Formwork to soffits of flat surface suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with rough finished surfaces of concrete, complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

M&L cutting chases pinning in brick mas and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling, under road, trenches, in air etc all as specified.

Stop valve cast copper alloy chromium plated (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F Bib taps fancy type 15 mm bore pipe, cast copper alloy chromium plated complete all as spd and directed.

S&F vitreous China ware wash hand basin white of size 550 x 400mm incl 32 mm dia CP waste coupling and PVC waste pipe and MS steel brackets all as spd.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed.

S&F brass CP tubular towel rail 600 mm long complete all as specified and directed.

S&F Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed.

S&F PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

S&F 20mm bore brass stop cock screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of pipe all as specified.

S&F 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured).

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parallel branches fitted with oval access doors of 100mm bore dia, complete, ISI Marked, fixed all as specified & directed.

S&F in 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

Cast Iron Branch peices, single (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75mm bore dia complete, ISI Marked, all as specified & directed.

S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified.

S&F 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F cast iron cowl for 50mm dia all as directed by Engr-in-charge.

Providing precast cement concrete in cover slabs type B-1,1:2:4 (20mm graded aggregate) for manholes etc shelves and similar articles with plain faces, set in cement mortar 1:6 complete all as specified and directed.

Providing cement concrete Type B-1 (1:2:4), 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railing upto 60cm in height, coping, kneelers, apex stones,bed plates, kerbs, water troughs and the like incl weathering, slightly rounded or chamfered angles and throating, including necessary form work, as directed.

Box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double shutters wire gaugedshutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to F I framework, including other fittings; hinges; handles, tarred hold fasts; PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded all as directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200mm size.

S & F for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.50 sqm in each pane complete all as specified.

M & L for RCC pipe NP-2 diameter 200mm pipe laid and jointed complete with collars.

M&L Soakage well, exc. In ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber, screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ RR masonry/ filling with brick bats, complete of Size 2.40 mtr dia X 3.00 mtr deep.

Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 100 users.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

Cutting into existing manholes for connecting new drains, making good to pipe (150mm dia or any size) and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required all as spd and directed by Engr-in-charge.

Surfaces excavtion n exc 30cm deep and averaging 15cm deep and getting out in any type of soil.

M&L 75mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub floors, sub bases, floors and pavings etc

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment.

Sand filling under floor finishing for sand cushioning etc

Providing cement concrete1:3:6 for kerb stone etc all as specified.

M & L for 75mm thick PCC 1:4:8 type D-2 as in subbase to flooring.

Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment.

Excavation in post holes or similar holes each not exceeding 0.5 Cum, getting out, returining, filling in and rammed earth or broken rubble mixed with earth around, in layers n exc 35cm watering and removing surplus soil to a distance n exc 50m and making good in any type of soil complete all as specified and directed.

M& L steel iron base plate plugs, bolts, and screws of Fe 410-W (Gde-E-250 Quality -A), complete all as specified and directed.

S&F mild steel as in vertical posts, roof trusses (framed), trussed, purlins, fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces all as specified.

M&L preparation of new or previously un treated surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer, complete all as specified.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50mm think of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as specified.

Hard core of broken stones or boulders of guage not exc 63mm, deposited spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete, all as specified.

M&L concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested in cement concrete 1:3:6 type C-2 for 200mm bore pipes etc all as specified.

M&L for Steel work in tubular trusses/purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, 50mm dia pipe and 50x50x6mm angle used as in steel complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (Using 20mm stone agg) as in foundation filing complete all as specified and directed.

Dismantling fencing any type and removing from site.

PCC 1:3:6 type C-2 using (20mm graded crushed aggregate) as in subbase and in foundation concrete complete all as specified and directed.

Mild steel posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, bolting, riveting etc and similar work confirming to Fe-410-O or Fe-310-0, complete all as specified and directed.

S& F 4mm dia galvanised steel wire as in chain link fencing with size of mesh 0.075x0.075 m and fixed to fencing post with nuts and bolts not less than 8 mm dia complete all as specified and directed.

Galvanised 2 strand, steel barbed wire hot dip confirming to IS-278-1978 2.24 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straingiing bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed. (each line wire to be measured).

S & F Mild steel screwe bolts (machine made) of dia 5 to 10mm of neck with hexagonal or square heads at one end and screwed both ends, each screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long all as specified.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats or frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

All- as per item above but reinforced (reinforcement cut as required to facilitate demolition).

Dismantling structural steel work in tubular purlins including doors, gates but excluding framed trusses etc complete all as specified.

Dismantling asbestos cement (corrugated semi corrugated) etc. sheets in roof covering etc complete all as specified.

Erection and fixing only steel work in tubular trusses and purlins including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St.-240, complete all as specified.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified.

35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.20 (a) of SSR Part-I 1991 (Larger size to be provided) complete, all as specified and directed.

M&L two coats of synthetic enamel paint on new or untreated wooden surfaces of any description, not otherwise described over 10 cms width or girth including preparation and a coat of pink primer, complete all as specified.

S&F 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

300 mm MS ordinary rat tail rod pattern springs for door including roller and roller plate,complete all as specified and directed

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor Overall length of cover plate 150mm

M&L Brick work with sub class'B' bricks (except bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) including demolition of existing brick work all as spd and directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of existing brick wall as specified and as directed.

M&L two coats of distemper oil emulsion over a coat of primer chalk including 2mm thick putty whitening including preparation of new surfaces complete all as specified and directed.

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm all as spd & directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and moulding at edge if reqd all as specified and directed.

M&L 20-25mm thick Kota stone in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, including Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises, all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15mm thick in CM 1:4 for laying floor finishes all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete.

M&L for Cement concrete 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection, 75mm thick and finished even and smooth without using extra cement all as specified and directed.

M&L RCC 1;2:4 tye B-1 using 20mm graded crushed stone agg as in Chajja complete all as specified and directed.

M&L formwork to chullah hoods, chhajjas, troughs and similar works incl edges rough finished surface of concrete complete all as specfied.

M&L for false ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either with plain white or crack) fixed using T-grid/Cross-T/wall angle/level clip and suspenders of standard galvanised sections in a grid size of 600x600 mm from Manufacturer M/S Saint Gobain or equivalent of Armstrong/Everest including taking down existing ceiling board & grid work etc of any type/pattern etc complete all as specified and directed.

S & F in repair Curtain rails, anodised aluminium alloy with bracket, end bulbs, fancy type, fixed in postion as approved by Engr-in-Charge.

MS Frame work for cooler stand and samilar work of Fe 410-W (gde E-250) quality 'B', complete all as specified.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

One 5 pin socket outlet 5 Amps on independent board with separate switch 5 Amp one way.

One 5 pin socket outlet 5 Amps on same board with separate switch 5 Amp one way.

All as per item No 133 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Supply and Fixing the modular switch piano type flush button single pole 10 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1,5 pin combined pin 6 Amp.

Supply and Fixing the modular switch piano type flush button single pole 16 Amp one module, front operated.

Supply and Fixing the modular socket 2 module 2 in 1, 6/16 pin combimed pin 16 Amp.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals.

Supply and Fixing the star rated Venti air fan AC single phase 230/240 volts 0f size 300mm sweep with loure of metalic body with grouting nut bolts and all as specified and directed.

Supply and fixing the bulk head light fitting LED type 10 watt complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sq mm.

M&L for Decorative ultra slim linear LED lighting fixture with extruded heat sink, environmental friendly, energyefficient ready to use light fitting wall/ceiling mounting suitable for 1X20 Watt LED tube with one no elecronic driver and accessories, pre-wired 4 ft lengh. Note : All LED fittings willbe approved from NVBL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F mirror light, 07 watt LED 2' length prewired with all accessories including lamp and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper condutor 3 core cable of size 0.50Sqmm. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 12 way double door open able complete.

S & F 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S & F MCB single pole with netural 240 volts 40-63 Amps C series.

M & L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion.

M/L for tube, light grade galvanised with all fittings laid in trenches/through wall / under road or floor of 40mm bore.

Supply, laying, jointing and testing of 6 Sqmm 2 core XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls complete all as directed.

M & L for sand filling in trenches dry and and clean sand unwashed including punning around cable for protection of under ground cable, complete all as specified and directed.

M & L for well burned bricks, laid flat (old size) sub class B designation 75 for cable protection, copmplete all as specifed and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Taking down carefully unsv copper/aluminium point wiring (light/ fan/ Bell/ socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

S & F Fan regulator modular step type suitable for 1200/1400mm sweep ceiling fan hum free, 100W- 2 module including necessary connections complete all as specified and directed.

Taking down ceiling fan/Exhaust fan by disconnecting the electric connection and dismantling the blades and removing from ceiling/roof of bldg by descrewing the nut bolt and complete all as specified and directed.

Supply and fixing in replacement of bulk head light fitting LED type 10 watt complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sqmm.

M&L in replacement for Decorative ultra slim linear LED lighting fixture with extruded heat sink, environmental friendly, energyefficient ready to use light fitting wall/ceiling mounting suitable for 1X20 Watt LED tube with one no elecronic driver and accessories, pre-wired 4 ft lengh. Note : All LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

Supply and in replacement wall mounted type fancy light fitting with 7 watt LED bulb and with decorative diffuser and mounting clips and lamp holder, wall mounting arrangment and all as specified and directed. Note : LED fittings willbe approved from NABL lab certificate and the certificate for 5 years warrany of product from Auth dealer will be produced while put up the samples for approval from accepting Officer.

S & F decorative wall mounting bed side light 3 watt fitting LED type having flexible neck all as specified and directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door openable, including down old, complete all as specified and directed.

S & F in replacement of 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S & F in replacement of MCB single pole with netural 240 volts 40-63 Amps C series.

M & L in replacement of for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion.

Supply and fixing, testing and connecting the star rated ceiling fan 230 volts, single phase of 1200mm sweep double bearing type with including down rod canopy cover etc and connecting with 3 core flexible copper conductor of 0.50 sqmm and including writing of MES No. with black enamelled paint, complete all as specified and directed.

S & Fixing High performance IP 66 LED Bldg lights of 20 watt complete with all fixing arrangement including taking down old, all as directed and specified by Engr in Charge.

Supply, laying, jointing and testing of 6 Sqmm 2 core XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches/pipes, fixed to poles/walls including taking down old cable, complete all as directed.

Heavy duty exhaust fan AC single phase 230/240 volts of size 250mm sweep with louvre of plastic body with grouting nut bolts and making the suitable hole for 250mm sweep exhaust fan by breaking the existing wall and making good the distrubed surface by plastering and matching with existing specifications, complete, all as specified and directed.

S & F sheet metal enclosure MCB distribution box SPN 240 Volts 2 way with IP-43 protection double door 240 V AC, 50 Hz AC complete with appropriate size of bus bar 200 Amps and neutral link, complete all as specified and directed.

Sub main wiring with PVC insulated unsheathed 2X4 sqmm multistranded copper conductor cable 1100 V drawn through & including PVC concealed conduit with 1X4 sqmm PVC insulated green copper cable for continuous earth, PVC conduit not less than 25mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing surface sub main wiring etc, complete, all as specified and directed.

S&F 20mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe ISI marked, complete all as specified and directed.

M&L for brick masonary valve pit of size 60x60x90cm (internal dimensions of chamber) including 23cmthick wall built in CM 1:6, 15mm thick plain cement plaster internally in CM 1:4 and flush pointing externally as the work proceeds, PCC 1:5:10 type E-2 in foundation 156x156cm size 40mm thick PCC 1:2:4 type B-1 in floor, 50mm thick PCC 1:2:4 as coping over brick work, MS sheet cover of size 112x112cmx3 mm thick fixed to angle frame made out of 40x40x3mm angle iron, MS handle to sheet cover, MS hinges welded to frame and sheet cover, painted with two coats of synthetic black paint over a coat of red of red oxide primer on steel work, two coats of white wash on plaster work including excavation and earth work in any type of soil complete all asspecified and directed. internal and externally on steel work incl excavation and earth work, complete all as specified and directed.

Cutting and threading to serviceable portion of existing GI pipe 25mm bore dia and making connection including reducer, Tee bend etc for 20mm GI pipe, complete all as specified and directed.

Raghbir chand

Alishan Builders

dadwal engineers

M/S DUGGAL CONSTRUCTION CO

M/S J N TRADERS

M/S TARA CHAND CONSTRUCTION CO.