PROVISION OF YOGA CENTER SPORTS STORE AND PROVISION OF RETRACTABLE FOLDING RAIN WATER SHED FOR OFFRS MESS AT HQ TC(U) BANGALORE

Amount

BOQ Dated

GENERAL SUMMARY NOTE : Schedule 'A' Part I to XI are prepriced by MES under Ser No. 1 to 11. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by Contractor for "BUILDING WORKS" as listed in Schedule Á' Part I

Lumpsum price worked out by Contractor for "SPECIAL ITEMS OF WORK" as listed in Schedule Á' Part II

Lumpsum price worked out by Contractor for "FENCING AND GATE" as listed in Schedule Á' Part III.

Lumpsum price worked out by Contractor for "INTERNAL ELECTRIC SUPPLY/AC" as listed in Schedule Á' Part IV.

Lumpsum price worked out by Contractor for "EARTHWORK AND SITE CLEARANCE" as listed in Schedule Á' Part V.

Lumpsum price worked out by Contractor for "ROAD/ PATH/ CULVERT/HARDSTANDING" as listed in Schedule Á' Part VI.

Lumpsum price worked out by Contractor for "AREA DRAINAGE/DRAIN" as listed in Schedule Á' Part VII.

Lumpsum price worked out by Contractor for "SEWAGE DISPOSAL" as listed in Schedule Á' Part VIII.

Lumpsum price worked out by Contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule Á' Part IX.

Lumpsum price worked out by Contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Schedule Á' Part X.

Lumpsum price worked out by Contractor for "INTERNAL WATER SUPPLY" as listed in Schedule Á' Part XI.

SCHEDULE Á' PART XII Fittings / Fixtures and Misc Items SPECIAL ITEMS OF WORK S & F 12mm thick toughened glass fixed as in partition/wall or door with or without aluminium frame work including necessary stainless steel joinary fittings complete all as specified and directed. NOTE: Rates of this item is not included in Schedule 'A' Part I "BUILDING WORKS"

Design, Supply, fabrication and erection of Powder coated retractable awning with 1st quality -600 GSM cloth , Lunar awning with ss powder coated , 16 geauge , pipes m16 coated , 8years warranty cloths. NOTE: Rates of this item is not included in Schedule 'A' Part I "BUILDING WORKS"

INTERNAL ELECTRIC SUPPLY/AC S & F of vertical type VTPN MCCB up to 250 Amps DB, 16 ways, Double door type complete all as specified and as directed

S & F of Wall mounting fan of size 400mm sweep, 100 W power Air delivary 100CMM complete all as specified and as directed.

S & F Pedestal fan of size 400mm sweep, 100 W power Air delivary 100CMM complete all as specified and as directed.

S & F of vertical type VTPN MCCB up to 125 Amps DB, 16 ways, Double door type complete all as specified and as directed

Supply, install and testing of wall split unit indoor/outdoor complete with cordless remote control unit and digital inverter compressor with minimum 5 star rating, inverter model of capacity 2.0 TR complete all as directed and specified.

S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of plus or + 2.5 % and of capacity 5 KVA complete all as directed and specified.

EARTH WORK & SITE CLEARANCE M & L Removing demolished material i.e. building materials, concrete, stone masonary, debris, tree roots, trunk, branches of any size etc. and dumping it outside MoD land including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination as and when directed by Engineer-in-Charge. Note : All debris and rubbish shall be removed from MoD land during or at the end of each working period by the contractor at his own cost in accordance with all applicable federal state and local regulations.

ROAD/ PATH/ CULVERT/HARDSTANDING M & L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content of paving bitumen VG-30 (by weight of total mix) using 6 to 8% waste plastic by weight of bitumen content (only plastic conforming to Low Density Polyethylene (LDPE), High Density Polyethylene (HDPE), PET and Polyurethane conform to the size passing 2.36 mm sieve and retained on 600 micron sieve shall be used) and not to be heated more than 180°C while mixing. Waste plastic mixing should be done using dry process as per para 6.1 of IRC:SP:98-2013. The waste plastic will not be provided by the department and the contractor to refer IRC:SP:98-2013 before quoting the rates. The mix shall be laid with mechanical paver, rolled and compacted to required camber and gradient with 8 to 12 ton power roller and tandom vivratory roller all as specified and directed.

M & L for cleaning the road surfaces of dirts, seals, oil grease, and foreign materials etc. and applying 2.5mm thick marking strips/lines, dashes, arrows, (retro reflective) of white or yellow colour using hot thermo plastic material by fully/ semi automatic thermoplastic paints applicator machine fitted with profile shoe glass beads dispencer, propan tank heater and profile shoe heater drive by operator on existing/ new road surfaces complete all as specified and directed. (glass beads shall not be less than 300 gms per sqm).

EXTERNAL ELECTRIC SUPPLY M & L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150mm dia suitable for 0.4mpa working pressure complete all as specified and directed.

PRACHANIVA CONSTRUCTIONS (BID ID -3093591)

VARGHESECHACKO AND CO (BID ID -3095302)

K. VENKATESH NAIDU (BID ID -3093102)

N RAJEGOWDA and CO (BID ID -3099115)