Supply of 5 cft wheel barrow as per Technical specification under Old Malda Municipality

Supply of 05 CFT Wheel Barrow as per Technical Specification under Old Malda Municipality. Mainframe shall be made of 30 x 30 x 5 mm M.S angle reinforced with 25 x 25 x 3 mm M.S angle and 25 x 5 mm M.S flat. Member of main frame and handle of wheel barrow shall be made of single angle. At the bottom frame made of 25 x 5 mm M.S flat crosswise. The handle shall be of 450 mm long and hand end of 150 mm length shall be made of 3 mm thick M.S Tube which shall be provided covered with suitable rubber grip. The Barrow provided with 2 numbers Rest leg which will be made of 25 x 5 mm M.S flat. Body: Body of the Barrow shall be made of 16 Gauge G.I sheet with continuous welding. Wheel: 2( Two) Numbers 300 mm x 50 mm COT/ Solid rubber tyre wheel with brass bush of 26 mm I/D shall be fitted with the Barrow. Axle: Axle shall be made of 25.4 mm M.S round. Both end to be fixed with M.S washer with split pin/ welding. Paint: The Wheel Barrow shall be completed with two coat of synthetic enamel paint over red oxide primer.