Painting, wall paneling, false ceiling, and repair work for Flat No. B-3 at the Municipal Corporation Officers Colony, Motijheel under Ashok Nagar Ward- 37 Zone-04.

providing and fixing double scaffolding system(cup lock type ) on theexterior side of building/struture, up to 25 meter hieght , above ground level , comp providing and fixing double scaffolding system(cup lock type ) on theexterior side of building/struture, up to 25 meter hieght , above ground level ,including additional rows of scoffolding in stepped ,manner as per etc all

Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet) Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet)-

12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 12mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.

Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work

Finishing walls with exterior emulsion paint (Apex) Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/l0sqm including one coat of primer applld @ 0.75Ltr/10sqm coat curing and cost of all material, labour, T&P etc. required fororooer comoletlon of work.for two coat.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 2n and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25xl0x0.SO mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws@ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I): 2011 (Board with BIS Certification marks)

Dismantling brick work or stone work in lime or cement mortar and Including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters 1200 feet\. Dismantling brick work or stone work in lime or cement mortar and Including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters 1200 feet\.

Brick work with common burnt clay (non modular) bricks of class -150 in super structure Cement mortar 1:4 (1 cement: 4 coarse sand) Brick work with common burnt clay (non modular) bricks of class -150 in super structure above plinth level up to floor V level in all shapes and sizes. Cement mortar 1:4 (1 cement: 4 coarse sand)

Supply and fixing of anodized aluminium partition having 2mm thick aluminium. Section, partly glazed and partly 12mm thick laminated board. Aluminium board size 83.50x44.65mm as vertical member and 11.40x44.45 as bottom and horizontal member with all fitting, glass panes of 4mm thick handle and locks complete

Tile work in skirting risers of steps and dado up to 2m height over 12mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) 8mm thick Tile work in skirting risers of steps and dado up to 2m height over 12mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) 8mm thick etc all comp