REPAIR TO ROOF TREATMENT FINS, FACIA, CHAJJA, PLASTER PLUMBING AND SANITARY ITEMS IN TECH AREA AT STN UTARLAI

Amount

Taking down roof treatment any type any description on top of roof not exceeding 10cm thick including removal of rubbish out side MD and complete all as specified and directed

M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed

M&L for applying roof treatment on top of roof with APP modified membrane with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminous oil based primer ( IS : 3884) @ 250gm / Sqm weight not less than 3 kg/Sqm complete all as specified and directed

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed Note :- Water proofing compound shall be measure and paid saperately

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick/concrete wall surfaces finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed Note :- Water proofing compound shall be measure and paid saperately

Supply only Integral water proofing compound complete all as specified and directed.

Taking down cement concrete plaster as in fin facia chajjas etc (other than ground floors) beam, staircase, landing and similar work complete all as specified and directed

M & L for Dubbing out average 20mm thick CM 1:4 on irregular face of old walls/ ceiling, fin facia chajjas etc complete all as specified and

M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, fin facia, chajjas finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed

M&L for preparation on new plaster surface of walls & applying two coat of cement base paint , complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for glazed ceramic coloured joint free tiles of size (450x300 mm) x 7mm thick in dados skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM 1:4 complete all as specified and directed

Taking up or down existing steel water tubing 15mm bore alongwith connection fixed/laid in any situation complete all as specified and directed

S&F for galvanised iron steel water tubing 15mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Taking up or down existing steel water tubing 20mm bore alongwith connection fixed/laid in any situation complete all as specified and directed

S&F for galvanised iron steel water tubing 20mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth on stone concrete block or slab wall complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres complete all as specified and directed

Dismantling water tanks capacity exc 250 litres and n exc 500 litres complete all as specified and directed

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

Dismantling water tanks capacity exc 500 litres and n exc 1000 litres complete all as specified and directed

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed

S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed

Demolition and breaking up drain pipe 75 mm bore salt glazed stone ware/AC/PVC pipe complete all as specified and directed

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls and stack clamps as in rain water pipes complete all as specified and directed

S&F 75mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed

M&L for 75mm dia PVC (SWR) floor trap plain including jointing with solvent cement Complete all as specified and directed

S&F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest complete all as specified and directed

S&F in repairs WC pedestal pattern wash down type (European type WC), white or coloured superior quality including plastic seat cover and making good to the disturbed surfaces complete all as directed

S&F 100 bore cast iron 'P' or 'S' trap with cement joint complete all as directed

S&F in repair 10 Ltr capacity PVC valve less, symphonic action type flushing cistern low level white with inlet ball valve float & handle complete all as directed

S&F as in repairs stainless steel grating doom of 100mm dia with / without central hole set over the existing nahani trap/ floor trap in neat cement & pointed to match the floor finished all as directed

S&F in repair vitreous china wash hand basin size 550x400mm including vitreous china pedestal brackets & one No PTMT waste coupling 32 mm size, 15 mm bore a CP cast copper alloy fancy type pillar tap quarter turn type complete flexible PVC waste pipe of suitable length all as directed at site

S&F in repairs vitreous china urinal, half stall type including suitable size waste coupling and waste pipe complete all as specified and directed

S&F in repairs 15mm bib tap cast copper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair 15mm bore cast copper alloy chromium plated angle valve quarter turn fancy type with flange plate complete all as specified and directed

S&F in repair 15mm bore stop valve of cast copper alloy quarter turn type screwed down high pressure with crutch or butter fly handle fancy type chromium plated, with long shank and cup (concealed type ) complete all as directed

S&F in repair 15mm bore cast copper alloy chromium plated two way angle cock quarter turn fancy type with flange plate complete all as specified and directed

S&F in repair 15mm chromium plated health faucet with 1.0 meter long CP flexible pipe complete all as directed

S&F in repair PTMT jet spray for EWC with flexible pipe with PTMT nut & bolt complete all as specified and directed

S&F in repair stainless steel towel rail round 20mm dia with round flange of standard quality fixed with steel screw and PVC rawl plug complete all as specified and directed

S&F in repair chromium plated shower rose fancy type with swivel joints including shower arm 15mm dia 195mm long with bend of 45 degree with flange of CP brass complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe minimum weight 60gms complete all as specified and directed

Chipping of column/ beams and removing losse martar with chisel hammer with out much impect on concrete surface, clean the surface by snd blasting the surface using river sand with minimum of 6 kg pressre at the nozzle or air blow by electric pressure blower by mechanical compressor , cleaning the exposed reinforcement with wire brush & applying CICO Clean-o-rust rust remover in two coats over rusted reinforcement curface and providing anti corrosive coating with two component epoxy based zinc rich primer/ rust passivation ihibitor coat at the rate of 5 sqm / Ltr with CICO ZINCILATE-500 OR equivalent to reinforcement as per manufacture"s instruction including all scaffolding, machinery, tools tackles and men materials and clearng of debris complete all as specified and as dircted by Engr- in - Chage. Makes: CICO clean-O-rust, CICO zincilate-500 or equivalent in fosroc/ Dr Fixit/ ACC/ I&T/STP

M&L for preparation the surface and applying 20 to 40 mm thick in layers, each layer not exceed 20mm with polymer modified mortar (PMM) on surface of beams, column with PMM- VICO Repocen PM or equivalent in Fosroc/ Dr Fixit/ ATP including all necessary scaffolding, man and materials complete all as specified and directed

Dismantling /taking down old existing boarding any description, fixed in any position withscrews

M&L Block board, grade 2 quality, interior grade, comercial type 18/19 mm thick in cub board frame, fixed with screws and plugs to walls

M&L Plywood grade BWR, type BB, 7 ply, 12 mm thick, fixed with screws to timber, or block board frame work in cubboard shutter, drawers etc

M&L Decorative laminates 0.9 mm thick type I, or Surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

M&L Stainless steel hinzes for cub board including self closing mechanism

M&L mild steel Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long

M& l Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in and fixed

M&L 8 mm thick tempered glass with grounded edges as in shelves fixed with PVC vacume headed nobes.

M&L 18 to 20mm wide 2mm thick PVC edge lipping fixed to edges of fram/ shutter of cub board with nail and adhesive, colour math to decorative lamination complete as directed

M/S TANUSHREE CONSTRUCTION COMPANY