SPL REPAIR WKS OF BLDG T13,T15 OR ACCN OTM OF 24 FD WKSP EME, BLDG NO T25,T31 OR LINES OF 53 ENGR REGT AND PROVN OF CEILING FAN AT JCOS/OR MD ACCN OF 213 RKT REGT,200 DEFICIENT CEILING FANS FOR JCOS/OR MD ACCN OF 501 AD MSL REGT (MRSAM) IN NASIRABAD

Amount

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on stone masonry, external surfaces finished fair & even etc complete all as specified and directed by Engr-in-Charge.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth (without using extra cement) over and including dubbing coat (if required) etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even etc complete all as specified and directed by Engr-in-Charge.

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) etc complete all as specified and directed by Engr-in-Charge.

M&L two coats of cement base paint over one coat of cement based primer on plastered/ concrete surfaces of walls including preparation of surfaces etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care white putty on plastered surface etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonary built in cement mortar etc etc complete all as specified and directed by Engr-in-Charge.

M&L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc etc complete all as specified and directed by Engr-in-Charge.

All as per item No. 9.00 here in before but except stone etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in floors and pavings n. exc 15cm thickness (above or below GL) etc complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick cement concrete, type B-0, 1:2:4 (Using 12.5mm crushed stone aggregate), finishing cement concerete surface even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge.

M&L, for 20-25 mm thick machine cut kota stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:4 ,rubbing , polishing complete inclu Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 etc complete all as specified and directed by Engr-in-Charge.

M&L Kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete inlcuding 10 mm thick rendering in vertical surface of brick / PCC block wall in cement mortar 1:4 and including taking down of old kota stone dedo etc complete all as specified and directed by Engr-in-Charge.

Demolition Stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed etc complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge.

M&L for sand filling 25mm thick under floors or in foundations incl watering and consolidation etc complete all as specified and directed by Engr-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality etc complete all as specified and directed by Engr-in-Charge.

M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.50sqm not exc4.00 Sqm each and etc complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates inc,necessary fixing lugs,hinges,lock strike plate,etc of size of frame 165x60mm etc complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete of type C1 1:3:6 ( 20mm graded aggregate )in lintels upto 1.5m clear span,cills,steps;seismic and other similar bands,plinth courses,string courses,lacing courses,parapets and railings upto 60cm in height,copings,kneelers,apex stones,bed plates,kerbs not provided for in item 4028,water troughts and the like inc.weathering, slightly rounded or chamfered angels and throatinf, etc complete all as specified and directed by Engr-in-Charge.

S&F factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9mm thicks BWP commercial ply or 12mm veneered parlide board with commercial vereered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated 35mm thick etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed by Engr-in-Charge.

S&F 100mm size MS hinges and fixed to PVC frame and angle iron frame by necessary welding etc complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminum alloy handle fabricated type anodized, 150mm size etc complete all as specified and directed by Engr-in-Charge.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring, fixed in floor etc complete all as specified and directed by Engr-in-Charge.

S&F aluminum anodized barrel tower bolts extruded section, 150mm size etc complete all as specified and directed by Engr-in-Charge.

S & F 300 mm long aluminium sliding door bolt, anodised,with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed etc complete all as specified and directed by Engr-in-Charge.

S & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including synthetic enamel paint over a coat of zinc chrome red oxide primer etc complete all as specified and directed by Engr-in-Charge. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F galvanized mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples etc complete all as specified and directed by Engr-in-Charge.

S&F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exceeding 0.50 Sqm in each pane etc complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets, Suply & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, etc complete all as specified and directed by Engr-in-Charge.

Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site etc complete all as specified and directed by Engr-in-Charge.

Material and labour for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces finished even & smooth without using extra cement etc complete all as specified and directed by Engr-in-Charge. Note:- WPC will be measured and paid separately.

M&L roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 mircron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 2.60 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps etc complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed by Engr-in-Charge.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed by Engr-in-Charge.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame for suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, etc complete all as specified and directed by Engr-in-Charge:-

All as per item No 43.00 above but One light point/bell point controlled by one, one way switch.

All as per item No 43.00 above but One ceiling fan/exhaust fan point controlled by one, one way switch through regulator.

All as per item No 43.00 above but One three pin 5 Amp socket on same board with other switches.

All as per item No 43.00 above but One 3 pin 5 Amp socket on independent board.

All as per item No 43.04 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, etc complete all as specified and directed by Engr-in-Charge.

S&F stepped type ceiling fan regulator, 230 volt AC, 2 module, etc complete all as specified and directed by Engr-in-Charge.

S&F of switch piano 1 way 6/10Amp, etc complete all as specified and directed by Engr-in-Charge.

S&F of switch piano 1 way 16Amp, etc complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 5 amps, single pole one way 240 volts etc complete all as specified and directed by Engr-in-Charge.

S&F of socket 6Amp, 2/3 pin combined etc complete all as specified and directed by Engr-in-Charge.

S&F of socket 6Amp/16 Amp, 2/3 pin combined etc complete all as specified and directed by Engr-in-Charge.

S&F switch piano flush type 15 amps, single pole one way 240 volts etc complete all as specified and directed by Engr-in-Charge.

S&F Socket outlet 3 Pin 5/6 Amp flush type etc complete all as specified and directed by Engr-in-Charge.

S&F socket out let 2 in 1,multipurpose 3 pin 15/16 Amp flush type ISI marked etc complete all as specified and directed by Engr-in-Charge.

S&F ceiling fan regulator electronic flush , steped (four step) 230 Volts AC etc complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose surface bakelite 3 terminals 63.5 x 17 mm etc complete all as specified and directed by Engr-in-Charge.

S&F of lamp holder PVC/polycarbonate type with back plate etc complete all as specified and directed by Engr-in-Charge.

S&F box type LED tube light fitting in acrylic linear tube 1x 20 watt, 230V complete with bipin holders,LED power driver, connector block, and LED Tube rod 20 watt etc complete all as specified and directed by Engr-in-Charge.

S&F LED mirror Light fitting, 1X 10 W, attractive wall/ceiling mounted type with mettalic channel and white reflector, suitable for mirror light fittings with complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable etc complete all as specified and directed by Engr-in-Charge.

S & F of LED lamp 9/10 watt , 230 volts , 50 Hz, B-22 base for fixing in lamp holder and wall mounted decorative light fitting etc complete all as specified and directed by Engr-in-Charge.

S & F of LED bulk head luminaire 1x 10 W bulk, IP 65 protection complete with all accessories and including connecting up with three core copper conductor cable etc complete all as specified and directed by Engr-in-Charge.

S & F of LED street light fitting 25/30/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp and including street light bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection etc complete all as specified and directed by Engr-in-Charge.

S & F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp and street light bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection etc complete all as specified and directed by Engr-in-Charge.

S & F of MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate etc complete all as specified and directed by Engr-in-Charge.

Taking down existing ceiling fan, dismantling blades and refixing after cleaning incl conecting up with three core flexible cable from ceiling rose to fan etc complete all as specified and directed by Engr-in-Charge.

S & F of ceiling fan 1200 mm sweep, 230 Volts, AC , 50 Hz, copper winded motor, BE star rated white colour complete with motor, blade set of three nos , down rod, canopy, shackle assy including fan hook etc complete all as specified and directed by Engr-in-Charge.

S & F ceiling fan, 1200mm sweep, ISI marked, BEE rated, suitable for 230 Volts, 50 Hz with motor, blades (03 No), down rod , canopy & shackle assembly and hanging including taking down existing fan and provision of suitable size of PVC insulated, PVC round sheathed flexible three core copper conductor 0.5 sqmm cable for connection of fan from ceiling rose & writing MES Number with black enamel paint, complete all as specified and directed by Engr-In-Charge. Make : HAVELLS/BAJAJ /USHA/ CROMPTON

Supply and fixing fan hook suitable for fixing on GI pipe 40 mm dia or fixing in roof/ceiling suitable for hang of fan easily etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing tubes light grade GI tubing 40 mm dia on wall for hanging arrangement for ceiling fan including wall hole and plaster or making good etc complete all as specified and directed by Engr-in-Charge.

S & F of MCB SPN, 240 volt, 40 Amp capacity, 10 KA, 'C' curve etc complete all as specified and directed by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve etc complete all as specified and directed by Engr-in-Charge.

S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve etc complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 incl dismantling of old unsv existing earthing etc complete all as specified and directed by Engr-in-Charge.

M& L for TV Socket incl PVC conduit and co axial cable wire etc complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core etc complete all as specified and directed by Engr-in-Charge.

S & F of tubes light grade GI tubing 40 mm dia with all fitting laid in trenches, fixed on pole/on wall for cable protection etc complete all as specified and directed by Engr-in-Charge.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil etc complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil etc complete all as specified and directed by Engr-in-Charge.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and directed by Engr-in-Charge.

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down etc complete all as specified and directed by Engr-in-Charge. Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly etc complete all as specified and directed by Engr-in-Charge.

M & L for laying of bricks locally available sub class 'B' bricks, non-modular sizes as per IS 1077: 1992 for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable etc complete all as specified and directed by Engr-in-Charge.

M/S JAGDISH PRASAD AIRUN (BID ID -3139927)

ENGINEER CORPORATION OF INDIA (BID ID -3139933)

S S TRADERS (BID ID -3145644)

M/S SUMAN ENTERPRISES (BID ID -3146811)