PROVN OF DRAIN OPPOSITE 313 COY ASC SUP TYPE F UNDER GE NARANGI

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Material & labour excavating over areas not exceeding 1.5 metre deep and getting out in soft/loose soil complete all as specified and directed.

Material & labour excavating over areas exceeding 1.5 metre or part thereof deep beyond the first 1.50m and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil to distance exc 250 mtr and not exc 500 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and as directed.

Material & labour for hard core with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed

Material & labour for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and directed.

Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, bed block etc including necessary formwork complete all as specified and as directed.

Material & labour for plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed.

Material & labour for RCC 1:1.5:3 type A1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.

Material & labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

Materials and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

Material & labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Material & labour for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed.

M/S MANOJ PAUL (BID ID -3105989)

M/S M Ahmed and Co. (BID ID -3106458)

M/s DAS AND CO (BID ID -3109025)

M/S P&R CONSTRUCTIONS (BID ID -3109242)

M/S Bharat Construction (BID ID -3107223)