Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAdmitted-Finance | ₹1.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.2 Cr+₹8.8 L (7.87%)Admitted-Finance | ₹1.2 Cr+₹8.8 L (7.87%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S ABDUL AHAD RESHI L1 | AL AMEEN INFRASTRUCTURES L2 |
|---|---|---|---|---|---|
| 1.01 | Drilling of the hand pump well air rotary drilling Rig unit suitable for lowering MS Casing of 125mm dia in suitably drilled bore hole as per specification laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments including the cost of all consumables, like fuel, lubricants and other accessories complete in all respects whole in consolidated/semi consolidated/boulder formation up to desired depth. The job also includes the cost of pipe materials, (MS 125mm) and lowering of casing assembly, and its subsequent welding after every ten feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement.
The Job includes following activities and the items.
Collection of soil samples.
Power supply arrangement required during drilling etc.
P/F of well cap as per IS code 2800 with latest/up to date amendments, till the bore hole well is harnessed
Recording the strata details in the Drilling Job card.
Development of tube well with back wash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the direction of in-charge Engineer.
Class of pipe …. C class conforming to IS:1239 (Part Ist )
2004,equivalent to BS -1387/1985.
Acceptable make for Pipe….. Jindal /Prakash-Surya /TATA
Note: The pipe has to be provided by the firm and the rates quoted are inclusive of p/f of pipes and all taxes | 2,400 | mtrs | - | - |
| 1.02 | Supply, Installation testing and commissioning of India Mark II hand pumps assembly comprising of cylinder, Head, Handle assembly, front cover, Handle-Axle, washers bolt, risers & the connecting rods. The minimum submergence of the cylinder shall not be less than 30 ft and the number of connecting rods and the risers shall depend on the drilling depth of the well and the SWL of the well. | 40 | job | - | - |
| 1.03 | Providing and laying of circular cement concrete block of 1.5m dia and 0.3m (1 ft.) deep in a mix of 1:2:4 to give the adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. In case the suitable space for the above specification is not available, the surface area is to be adjusted according. The block comprises of a mud mat of 4 inch height and then laying of 8 inch cement concrete with suitable drainage. The block should have aesthetically good appearance. | 40 | job | - | - |
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
12 Sept 2020, 2:00 pmClosed
executive engineer phe ground water division sgr
executive engineer phe ground water division sgr
Construction of 125 mm dia Machine Drilled Hand pump Wells langate constituency
2020_PHE_103327_3
e-N.I.T. No- PHE/GWDS/ 20of 08/2020 Dated 31 -08
Open Tender
Drilling Works
Item Rate
45 days
kupwara
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,000
executive engineer phe ground water division sgr
₹2.1 L
Yes
26 Sept 2020
2 Sept 2020
14 Sept 2020
2 Sept 2020
12 Sept 2020
2 Sept 2020
2 Sept 2020 - 12 Sept 2020
Amount
Drilling of the hand pump well air rotary drilling Rig unit suitable for lowering MS Casing of 125mm dia in suitably drilled bore hole as per specification laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments including the cost of all consumables, like fuel, lubricants and other accessories complete in all respects whole in consolidated/semi consolidated/boulder formation up to desired depth. The job also includes the cost of pipe materials, (MS 125mm) and lowering of casing assembly, and its subsequent welding after every ten feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement. The Job includes following activities and the items. Collection of soil samples. Power supply arrangement required during drilling etc. P/F of well cap as per IS code 2800 with latest/up to date amendments, till the bore hole well is harnessed Recording the strata details in the Drilling Job card. Development of tube well with back wash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the direction of in-charge Engineer. Class of pipe …. C class conforming to IS:1239 (Part Ist ) 2004,equivalent to BS -1387/1985. Acceptable make for Pipe….. Jindal /Prakash-Surya /TATA Note: The pipe has to be provided by the firm and the rates quoted are inclusive of p/f of pipes and all taxes
Supply, Installation testing and commissioning of India Mark II hand pumps assembly comprising of cylinder, Head, Handle assembly, front cover, Handle-Axle, washers bolt, risers & the connecting rods. The minimum submergence of the cylinder shall not be less than 30 ft and the number of connecting rods and the risers shall depend on the drilling depth of the well and the SWL of the well.
Providing and laying of circular cement concrete block of 1.5m dia and 0.3m (1 ft.) deep in a mix of 1:2:4 to give the adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. In case the suitable space for the above specification is not available, the surface area is to be adjusted according. The block comprises of a mud mat of 4 inch height and then laying of 8 inch cement concrete with suitable drainage. The block should have aesthetically good appearance.
AL AMEEN INFRASTRUCTURES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.59 MB
BOQ_197054.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .