PROVN OF TOWER GUARD POST WITH LIVING ACCN AT CDO TRG AREA T JUNCTION FOR 1163 DSC PLATOON ATTACH WITH HQ JL WING, THE INF SCHOOL, PROVN OF STORAGE SHED NEAR BLDG NO 5 ABNS AT CDO WING OF HQ JUNIOR LEADERS WING, THE INFANTRY SCHOOL, BELGAUM AND SPE

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in Hard/ dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in Hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation and mass concrete complete all as specified and as directed

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in foundations, including footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, and mass concrete or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in Columns,Pillars,piers ,posts and struts or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in beams, cantilever and lintels over 1.5 m span etc or similar itemscomplete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in chajja or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as inSlabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Use and weste of steel form work for flat rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Use and weste of steel form work for rough finished surface to side andsoffit of beams, bressumers, cantilevers,and supports etc complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface of columns pillars,posts,struts,piers, and stanchions concrete square,rectangular or polygonal etccomplete all as specified and as directed.

Material and labour for Use and waste of steel form work for Chullah hoods,Chajjas,troughs and similar item including edges etc complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed.

Material and labour for Use and waste of steel form work to edges of concrete flats, n.exc 20 cm wide horizontal or slooping and similar works. complete all as specified and as directed.

Supply and fix Mild steel TMT bars of FE 500 /FE 500 D , 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Description all as per item No 17 here in before but 5 to 10 mm dia as in stirrups/spacers/binders etc

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for Plain Cement concrete type B-0, 1;2;4 (Using 12.5mm graded stone aggregate ) as in damp proof course 25mm thick using water proofing compound complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry 1:3:6 type C1 ( using20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for 25 mm thick Plain cement concrete, 1:2:4 type B1, using 20 mm graded stone aggregate, as in sub base of floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqmbut not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm on vertical surfaces such as dado, skirting etc set jointed and pointed in neat cement slurry and pointed in coloured cement to match the shade of tile over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces in backing coat of skirting, dado etc,complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Somany

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour forMachine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed.

Material and labour for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Material and labour for 35mm thick 2nd class hard wood plain, framed, panelled door shutter (two panels) with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats complete all as specified and as directed.

Material and labour for Factory made 2nd class hard wood Glazed and skeleton shutters , 35 mm thick , open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain,chamfered or rounded,mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for Factory made 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails and divided into square with plain chamfered or rounded mitred and rebated sash bars any numbers size of members of shutters as specified in SSR Part-I Section 8 Clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix Aluminium anodized sliding window / ventilator (Triple track) standard section of size 92 x 31.75 x 1.6 mm for bottom track, section of size 92 x 31.75x 1.4 mm for side and top frame, section of size 39 x 17 x 1.4 mm for top and bottom shutter rail, section of size 39 x 17 x 1.4 mm for outer style, section of size 39 x 27x 1.4 mm for inter lock style including fabrication to required size and fixed with 4 mm sheet glass oridinary quality, glazing and rubber gas cut including fitting etc with roller suitable spring catcher heavy duty, handle and locking arrangement complete all as specified and as directed

Notes: (i) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (ii) Make of Glass : :Saint Gobain/Modi Guard/ Gold Fish (iii) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of anodisation shall be of 15 Microns

Material and labour for Solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing complete all as specified and as directed.

Supply and fix Factory made solid PVC moulded door shutter, 30mm thick (stiles), with 2, 4, 6 raised panel design with 2mm thick Moulded PVC sheet on the front face , with wood free EPS as per specification & drawings including 3 Nos MS butt hinge ' medium weight' of 100mm long each, 1 No Aluminium barrel tower bolt of 150mm long each, 2 Nos aluminium anodized fabricated type door handle of size 150mm and 1 No aluminium anodized sliding door bolt each not less than 12mm dia with and incl a minimum of 6 bolts and nuts 4 on bolt plate and two on staple 300mm long with fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified .

Supply and fix Stainless steel butt hinges 75 mm in size, medium weight fixed with SS screws complete all as specified and as directed .(ISI MARKED)

Supply and fix MS butt hinges cold rolled medium weight 100mm sizecomplete all as specified and as directed.(ISI MARKED)

Supply and fix Mild steel butt hinges 75 mm in size, medium weight, cold rolled complete all as specified and asdirected . (ISI MARKED)

Supply and fix in repairs 300mm long Mild steel helical door spring, ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Supply and fix 100mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed. Make :Crown/Classic/Adarsh

Material and labour for Floor door stopper of brass body and tongue,anodised,with 140mm long cover plate and hard drawn steel spring ,fixed in door complete all as specified and as directed.. Make :Crown/Classic/Adarsh

Supply and fix MS Flat iron of size 25x3mm thick as in hold fast and similar small article conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless wire stapples complete all as specified and as directed.

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer. complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 80mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-40 grade complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate ) as in coping /bed plates ,eves filling in roof set in cm 1:4 including necessary steel form work complete all as specified and as directed .

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Note : Make of PVC Pipe : Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in trenches complete all as specified and as directed. Note : Make of PVC Pipe : Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 75 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs 75mm dia PVC (SWR) floor traps plain with grating including jointing with solvent cement complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Material and labour for Rendering 10 mm thick in cement mortar 1:6 on fair faces of PCC block masonry or concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and as directed

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of PCC block masonry or concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and as directed Note: Water proofing compound shall be measured and paid separately.

Material and labour for Rendering 5mm thick in cement mortar 1: 3 on soffit of roof ceiling and finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound . Note : Make :Impermo/Roff/Cico

Material and labour for Preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying .two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed.Note :Make of exterior emulsion paint : Asian Paints (Brand : APEX)

Material and labour for Preparing newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.

Material and labour for Preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistent primer over 1mm thick wall case putty complete all as specified and as directed.

Supply and fix Rotational moulded Polyethylene water storage tank of capacity 1000 litres(cylinderical vertical with closed top ) ISI MARKED , double layered hoisted and fixed in position with and including Ball valve of 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight : 210 gms) complete all as specified and as directed . Note :(i)Make of PVC water tank :Sintex/Polycon/Infra(ii)Make of PTMT ball valve : Prayag /M/S Shakthi Industries

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including 'P' or 'S' trap etc.including provision of lime concrete bedding .complete all as specified and as directed.

Supply and fix Grating of 150mmSize of Stainless Steel (Minimum weight :100 gms)complete all as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) vent cowl .Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs Vitreous china wash basin,white,size 550x400mm,including CI brackets , with PVC waste pipe and waste fittings and cutting for and pinning in ends of brackets or erecting stands etc complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs Tubular towel rail 20mm dia brass chromium plated D type 60cm long between flanges complete all as specified and as directed.(ISI MARKED)

Supply and fix Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note : Make :Parryware (Slim Line ) /CERA/ Hindware

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings , fixed complete to walls, ceilings or laid in floors. complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings , fixed complete to walls, ceilings or laid in floors. complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix Unplasticised PVC (UPVC) pipe 15 mm bore of pressure rating 10 Kgf/cm2 with all fittings , fixed complete to walls, ceilings or laid in floors. complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 15mm bore Stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed. Make : Metro/GEM/ESS ESS

Supply and fix 25 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Supply and fix Chromium plated Pillar taps fancy type , cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Cera, JAQUAR, Johnson/ ESS ESS/ ARK.

Supply and fix in repairs 15 mm bore Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Make: JAGUAR or equivalent model inCera/ Johnson

Supply and fix vitreous china urinal bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed. Make :

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix Brass chromium plated overhead shower with shower arm flange, with swivel joints, any size, fixed to 15mm bore steel pipe, fixed in repairs completeall as specified and as directed. Note :Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Supply and fix Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs complete all as specified and as directed. Make: Jaguar /Cera/ Johnson

Material and labour for Machine cut granite slab in dado or skirting ,steps ,risers ,cladding to pillars etc 20mm thick (table rubbed and polished) laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and 10mm thick in cm 1 :3 on fair faces of brick work or concrete surfaces as in backing coat of skirting, dado etc, complete all as specified and as directed .

Material and labour for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof padding/benching for maintaining slopes where required over slabs n exc 15 cm thick including necessary form work and finishing the exposed surfaces even and smooth without using extra cement completeall as specified and as directed.

Material and labour for Preparation of RCC roof slab by removing dust, dirt etc and applying oil bound bituminous primer at the rate of 0.2kg per Sqm and providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm including minimum 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at the rate of 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at the rate of 0.1kg/sqm completeall as specified and as directed.

Material and labour for Rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed..Note : Water proofing coumpund shall be measuerd separately

Excavation in post holes each n. exc. 0.5 Cum getting out, in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate as in foundations filling and mass concrete, bed blocks complete all as specified and as directed.

Supply and fix Mild Steel work in tubular trusses, posts,rafters, struss etc including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to I S 1161-1979 grade St-240 including Preparation of new steel surfaces of any description and applying one shop coat of Zinc chromate red oxide primer paint complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 50 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate )75 mm thick as in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for 15 mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even and smooth without using extra cement with water proofing compound complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for Preparation of newly plastered surfaces of wall of any description and applying .two coats of cement based paint over a coat of chalk whitening primer complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B1, (Using 20 mm graded stone aggregate ) 50 mm thick as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings including ridges. and taken as credit . complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work of any description and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood in scantlings , clean sawn complete all as specified and as directed .

All as per item no :109 mentioned here in before but except timber complete all as specified and as directed.

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and applying two coats of creosote oil complete all as specified and as directed.

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws and washers complete all as specified and as directed. Make : TATA BLUE SCOPE/LLOYD/JSW(COLOURON

Supply and fix in repairs Rolled mild steel (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats and flat as in wind ties etc. confirming to grade Fe 410-W Gde E - 250 quality 'A' or Fe 310-0 complete all as specified and as directed.

Supply and fix in repairs Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails and taken as credit complete all as specified and as directed.

Supply and fix in repairs Aluminium composit panel board 3mm thick fixed over existing wooden/steel frames and necessory frame work with screwing and scaffolding etccomplete all as specified and as directed.

Taking down eaves gutter pipes,rain water pipes (of any size and pattern) including fittings,head shoes,bends,swan neck etc.and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter Trapezoidal shape 150mm dia complete all as specified and as directed.Make :Prince/Supreme/Finolex

Demolition/breaking up or down PVC /AC/CI/Cement drain pipe any size fixed in any position and removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed

Supply and fix in repair PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed Make :Prince/Supreme/Finolex

Supply and fix in repair PVC (SWR) bends any radius provided with access door 110mm bore complete all as specified and as directed . Make :Prince/Supreme/Finolex

Dismantling wall or ceiling boards or insulation boards/ slabs any thickness and description including cover fillets and taken as credit complete all as specified and as directed . .

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST / (ii) Thickness of aluminium anodisation shall be of 15 microns .(iii) Make of aluminium section :Jindal/Indal/Hindalco

Taking down cement plaster on brick or stone walls built in cement mortar and removal of debris off the premises complete all as specified and as directed .

Material and labour for Two coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depo tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new and old surfaces complete all as specified and as directed.

Material and labour for complete removal of existing treatment and necessary preparation of surfaces of walls, pillasters, cornices, etc. and applying two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty complete all as specified and as directed.

Material and labour for Complete removal of old plastered/unplasterd surfaces of walls and brooming down and appyling two coat of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Note :Make of exterior emulsion paint : Apex ultima - Asian paint)

Material and labour for Grinding and polishing of tandoor stone/Kota Stone/ Terrezo tiles of any description of required times complete all as specified and as directed .

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed.

Supply and fix in repairs 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi guard/Gold fish

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed with tinned tack or stainless steel wire staples complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminous primer at 0.2kg per Sqm over provide APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster mat weight not less than 160gms per Sqm including minimum 10cm side/over lap and including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm over on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm over rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed . Note :water proofing coumpund shall be measuerd separately .

Disconnecting existing tanks exc 250 ltr and n exc 500 ltr, setting aside (or lowering if required) for repairs,cleaning etc and hoisting if required. Reconnecting and re-fixing in position complete all as specified and as directed . Note :cleaning and repairing etc shall be measured separately.

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item No 136 here in before but 20mm dia bore of pipe.

Supply and fix Unplasticised PVC pipes of 15mm dia., pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.Note :Make of UPVC Pipe :Finolex/Supreme/Prince

Description all as per item No 138 here in before but 20mm dia bore of pipe.

Re-fixing old UPVC/GI tubing 15mm bore in new or old position (wall, ceiling and floor etc)

Description all as per item No 140 here in before but 20mm dia bore of pipe.

Material and labour for Concealed Point wiring with FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm nominal cross sectional area for phase and neutral in and including non metallic rigid PVC conduit of 20 mm dia , ISI marked with all accessories in wiring system and provision of 1.5 sqmm green colour FRLSH PVC insulated unsheathed electric cable confirming to IS:694,1100 V grade AC,single core having multistranded copper conductor of size 1.5 sqmm connected to common earth dolly with cast iron /pressed steel terminal box of suitable size and 1.0 mm thick duly painted with inner and outside by anticorrosive paint etc and including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall . for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per in item No. 142 here in before but for one fan / Exhaust point controlled by one switch and regulator.

Description all as per in item No. 142 here in before but one 3 pin socket outlet, for independent socket 5 Amps point.

Description all as per in item No. 142 here in before but for one 05 Amps socket outlet on the same board with other switches.

Description all as per in item No. 142 here in before but wiring with 4.0 Sqmm FRLSH PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket on independent board) with one run of copper conductorFRLSH PVC insulated multi-stranded cable 4.0 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix Switch piano type 5 Amps flush button 240 volts AC ,single pole , one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix Socket outlet 2 in 1, 3 and 5 Pin 5 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit ,flush type , multi purpose complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Electronic Fan regulator 120 Watt ,230 V, stepped type suitable for 1200 mm sweep ceiling fan complete all as specified and as directed.Make :Anchor/Rider/Legrand

Supply and fix ceiling rose ,surface bakelite, size 65x50mm , 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.Make : Anchor/Legrand/Indo Asian

Supply and fix Inverter type LED INTEGRATED BATTEN tube light fitting 20 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO20 or equivalent price and specification of M/S Wipro/CG

Supply and fix Inverter LED INTEGRATED BATTEN tube light fitting type 10 watt with square profile and polycarbonated channel ,Lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : :Havells Pride PLUS INVERTER BATTEN OF Model LHEXACP7FN1WO10 or equivalent price and specification of M/S Wipro/CG.

Supply and fix LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Make : Havells cat part no : ENDURASUNDOWNSL35WLED765PASYBOPCor equivalent price and specification of M/S Wipro/CG

Supply and fix ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) complete all as specifed and as directed . Note : (i) Make:-Bajaj /Crompton/Orient /Havells

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .Make :Havells/Khaitan/Almonard

Supply and fixing Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed. Make :Havells/Legrand/Indo Asian

Supply and fix MCCB,4 pole,125 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified. Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified.Make :Havells/Legrand/Indo Asian

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Material and labour for Point wiring 1.5 Sqmm single core FRLSH PVC insulated unsheathed 1100 volts grade AC single core having copper conductor multi-stranded cables for phase and neutral drawn through and including PVC casing capping (ISI Marked )of suitable size with all necessary fittings and provision of one run of Green coloured FRLSH PVC insulatedunsheathed 1100 volts grade AC single core having copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of 2nd class hard wood board with sunmica top cover for mounting switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/ Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No. 163 here in before but for One fanpoint controlled by one switch and regulator

All as described in item No. 163 here in before but for one 3n pin ,05 Amps socket outlet on independent board.

All as described in item No. 163 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 163 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm drawn through and including PVC conduit in ivory/green/white colour ,medium grade 20 mm dia with all necessary fittings and provision of one run of single core FRLSH PVC insulated unsheathed multi-stranded copper conductor cable of size 4 Sq mm for earth continuity and connected to common earth dolly fixed on wall/ceiling complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 4.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC conduit will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . Note : Make : Havells cat part no :LUMILINEBS20WLED830SPCWH or equivalent price and specification of M/S Wipro/CG

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hou sing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protectioncomplete all as specified and as directed . Note : Make : Havells cat part no : ENDURASUNDOWNSL25WLED765PASYBOPCor equivalent price and specification of M/S Wipro/CG

Supply and fix MCCB,4 pole,100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified. Make :Havells/Legrand/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed. Make :Havells/Legrand/Indo Asian

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4.0 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Gloster/Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth and getting out , in any type of Soil for laying of cables/ GI tubes/up to top of drain etc complete all as specified and as directed .

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and fix Galvanised iron pipe light grade 40mm dia with all fittings and fixed complete on pole/walls/in road etc for cable protectioncomplete all as specified and as directed. Make : TATA/JINDAL/Prakash surya

Supplyind and laying CPVC pipes 40 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supply and fix 40 mm bore dia gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed.Make : Leader/Kirloskar/Zoloto

Material and labour for Construction of valve chamber of internal size 900 x 900 x 960mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle iron frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) bed to drain pipes including packing under and haunching & benching against the side of pipes after they are laid and tested in for 200mm bore of pipe complete all as specified and as directed.

Material and labour for 200mm dia Reinforced concrete pipes class NP-2 conforming to IS laid in trenches and jointed in cement mortar 1:3 complete with collars complete all as specified and as directed.

Material and labour for PCC , 1:2:4 type B-1 (using 20mm graded stone aggregate) as in channel and benching including necessary steel form work complete all as specified and as directed.

Extra for forming Fair finished drain or channel 30CM inner girth in cement concrete using extra cement including forms, moulds ,mitred/stopped ends etc complete all as specified and as directed.

Material and labour for Rendering 15mm thick other than fiar faces of brick/block masonry work in CM 1:4 and surface finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick other than fiar faces of brick/block masonry work in CM 1:6 and surface finished even & smooth using extra cement. complete all as specified and as directed.

Material and labour for Precast cement concrete manhole cover in 1:2:4 type B-1, using 20mm graded stone aggregate and jointedin CM 1:6 including use of forms, moulds etc complete all as specified and as directed.

SAGAR ENTERPRISES

DHANSHRI ENTERPRISES

M/S MAHADEV M PATIL