Construction of precast RCC panel bounder wall, renovation of inspection house and staff quarters at Khiri Inspection house, Prayagraj

Amount

Dry earth work in excavation of foundation including back filling of excavation earth

P.C.C 1:3:6 in Foundation and Grouting/fixing of Column including with all material, Labour T&P etc.

Shuttering for pre-cast RCC work.

Steel reinforcement in slab including cutting bending, binding and placing in proper position including cost of steel, binding wire, labour, and T&P etc.

M-20 Concrete for Pre-Cast Boundry wall (Compound wall) with plank (2100X300X50mm) , and Column (2440X230X230 mm)

Installation charges including with Transportation, labour, T&P cost etc.

Dismantling reinforced cement concrete 1;2:4 Including Slacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling stone work in lime or cement mortar including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 6OM

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge within a distance of 6OM

Dismantling door and window indudrng chaukhat with holdfast including stacking of materials as directed by Engineer-in-charge within a distance of 60 M.

Dismantling cement concrete or brick or granolithic fIoor including base concrete including stacking of dismantled materials witllin a distance of 60 M. as directed by the Engineer-in-charge.

Centering & Shuttering for R.C.C work in slab of building work.

R.C.C. work 1:1.5:3 excluding reinforcement, Centering, Shuttering & staging.

providing and fixing pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L-drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to site with one coat of red oxide primer. (Double Rebate)

providing and fixing pressed steel Chaukhat made of M.S. Sheet 18 gauge (1.25 mm.) including iron hinges of 100 X 3 MM. I.S.I. Mark drilling holes of L-drop, tower bolt and 230 x 40 X 6 mm. flat iron hold fast including supply of all materials, labor, T&P ,carriage up to site with one coat of red oxide primer. ( single rebate )

Supply and Fixing of 4.5 cm thick seasoned wood partly panelled and partly glazed door and window Shuliters including supply and lixing of wooden cleats and stops and including fixing & adjustment or hinges, bolts, lacks handles springs and/or other fittings but excluding painting with two coats of Black. Japan on all iron fittings if necessary and including fixing the glass panels with putty and brand, filling, with necessary screws to be supplied departmentally.

Supply and Fixing of 4.5 cm thick seasoned wood fully panelled door and window Shuliters including supply and lixing of wooden cleats and stops and including fixing & adjustment or hinges, bolts, lacks handles springs and/or other fittings but excluding painting with two coats of Black. Japan on all iron fittings if necessary screws to be supplied departmentally.

Cement plastering 12mm thick (1:3) on stone masonry . Rate are for 3m. height, lead up to 60M.

Cement concrete 1:4:8 in foundation. floor and concrete blocks. Up to 3 meters lift and lead up to 6OM.

2.5 cm (1") thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm (1") graded approved stone, grit laid in panels finished with 3 mm (1/8") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm (3") thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm (14")gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish, including supply of all materials, labour and Tools & Plants etc. required for proper completion of the work. Excluding GST .

Providing and Laying premium quality Glazed vitrified tiles(GVT) flooring over 20 mm thick base of cement mortar 1 : 3 (1 cement 3 coarse sand) laid jointed with white cement (with pigment) slurry including cost of all material, labour, T&P, rubbing and polishing complete in all respect.

Providing and Laying 6 mm. china white glazed or colour tiles in wall laid with 1 : 3 cement & coarse sand mortar finished with white cement slurry, jointing & polishing complete, including supply of all material, labour T&P etc. required for proper completion of work.

Finishing wall with white cloured two coat approved make of or Birla / J.K. wall putty including cost of all material, labour, T&P required for proper completion of work

Distempering approved brand (two coats) over one priming coat of whiting on new surface after thoroughly brushing the surface free from dropping and other foreign matter including preparing the surface even and sand papered smooth.

Flooring for Apron around the building including cost of all Material and Labour T&P etc.

Cement Pointing with 1:3 CM (Raised) on stone masonry/m2

Fabrication and fixing of mild steel / iron work in grill, including cutting. drilling, welding rewetting and fixing hings where necessary with fixing of position including cost of all material, labour, T&P etc. required for proper completion of work with one coat of red oxide primer.

Coursed rubble masonry in Cement mortar (1:3)

Painting two coat of wooden primer and two coat paint on new wooden surface including thoroughly cleaning of dirt & other foreign matter and sand papering & making smooth surface.

Painting two coat of Synthetic enamel paint on new surface (excluding cost of primer) superior quality such as luxol, higloss, apcolite, superiarc. dulux, including cost of all material, labour T&P etc. required for proper completion of work.

1st class Brick work in cement mortar(1:3) .Rate are for 3m. height. lead up to 60M. including cost of materials.

1st class Brick work in cement mortar(1:6) .Rate are for 3m. height. lead up to 60M. including cost of materials.

1st class Brick work in dry masonry .Rate are for 3m. height. lead up to 60M. including cost of materials.

Cement plastering (1:3) on Brick masonry with neat cement slurry. Rate are for 3m. height, lead upto 60M including cast of materials.

40 mm size brick aggrigate filling including cost of all material, labour, T&P, etc.

Local Sand filling outer the Soak pit including cost of all material, labour, T&P, etc.

providing and fixing 100mm dia S.W pipe L/S including cost of all material, labour, T&P, etc.

Wiring point for light with 1.5 Sq.mm. PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. pipe concealed in the wall complete with 8 SWG.I. earth continuity wire and piano type switch etc. complete in all-respect

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the PVC conduit pipe earth continuity wire and piano type switch etc. complete in all respects.

Wiring point for plug with 1.50 sq mm, PVC insulated multisrand copper conductor cable or earth wire drawn inside the conduit. Conduit concealed in the wall

Wire point for HPMV lamp with 2.5 mm 2 PVC/C/V 1R insulated single core cable in heavy gauge rigid steel conduit conduit. concealed in the wall ccomplete with 8 SWG G.I. earth continuity wire with 15 A piano type switch etc. complete in all respect.

S/F Isolator (63A , 220V) Make type Havells or any approved brand including with electrician and labor charges

S/F M.C.B (16A, 220V) Make type Havells or any approved brand including with electrician and labor charges

S/F M.C.B (10A, 220V) Make type Havells or any approved brand including with electrician and labor charges

providing and fixing LED light Panel 70W Make type Havells or any approved brand including with electrician and labor charges.

S/Fixing 100 mm size 'P'or 'S' trap for water Closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 cement: 1 one sand)

P/F Indian (Orissa pan) type white glazed earthen ware 1st quality lSI marked W/C pan size 580 Indian make of approved quality including cost of all materials,

P/F European type white glazed earth ware W.C. pan (Indian make of approved '1st' quality ISI marked Bakelite seat cover & lid with C.P. Brass sand) excluding cost of material.

P/ Fixing 10 Its. Low revel P.V.C cistern of standard approved make complete with all accessories and fittings.

P/F mirror of size 900mmx45mm of approved make with teak wood frame and 6 mm thick hard board baking including cost of all material, labor T&P etc,

P/Fixing wash basin 550x400 with Pedestal and holes for pillar Cock with C.I. M.S. brackets painted white including cutting hole & making good the same.

P/Fixing stainless steel kitchen sink 510x310x200 with J. bracket excluding cost of other fittings.

P/Fixing with concealing CPVC 15 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

P/Fixing with concealing CPVC 25 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete (internal works) including cost of material.

P/F PVC over head tank 1.0KL Tank capacity in any approved brand such as sintex including all cost of material and manpower.

P/F Water mixture in any approved brand including all cost of material and manpower.

15mm dia stainless steel bib cock /No.

P/F 15mm dia stainless steel pillar cock ISI marked including cost of all material.

P/F 15mm dia CPVC union ISI marked including cost of all material.

P/F 25mm dia CPVC union ISI marked including cost of all material.

P/F 15mm dia CPVC elbow ISI marked including cost of all material.

P/F 25mm dia CPVC elbow ISI marked including cost of all material.

P/F 15mm dia CPVC socket ISI marked including cost of all material.

P/F 25 mm dia CPVC socket ISI marked including cost of all material.

P/F 15 mm dia CPVC Reducing T fitting including cost of all material.

P/F 25 mm dia CPVC T fitting ISI marked including cost of all material.

P/F 15 mm dia angle cock ISI marked including cost of all material.

P/F nahani trap with jali including cost of all material.

P/F 25 mm float valve in over head tank including cost of all material.

P/F water Shower with isi mark including cost of all material.

Transportation of Rig Machine And its T & P with Loading Unloading and manual sifting of clamp and eqipapages at site and return back after completion of work

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (0 to 10 m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (11 to 20 m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (21 to 30 m)

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay mixed with kankar, or charri or both and strata having stones also (31 to 60 m)

Supply and Filling of Bentonite slurry durnig Drilling work incluiding all cost of material and Labour etc.

Supply and lowring of 100mm dia PVC casing pipe with isi mark incluiding all cost of material and Labour etc.

Supply and lowring of 100mm dia PVC casing slotted pipe with isi mark incluiding all cost of material and Labour etc.

Supply stone grid (4.75 mm to 10mm) including filling surrounding in bore well.

Dovelopment of bore by air compressore.

Supply and installation 32 mm dia PVC column pipe 10 Kg/cm2

Supply and installation of 1 HP water filled submersible Pump set Approved make complete with starter panel etc.

providing and fixing of 32 mm dia 1 pair Iron Clamp

providing and fixing of Submersible Cable 2.00 sq mm Finolex make

providing and fixing of 32 mm dia pvc Elbow

providing and fixing of 32 mm dai cpvc Nipple

providing and fixing 100 mm dia steel bore end cap

providing and fixing 100 mm dia steel Bore Cap

providing and fixing of 32 mm dia cpvc Gate valve

providing and fixing of Nilon mesh and dori

providing and fixing of high tensile steel Supporting wire for submersible pump

ARJUN SINGH CONTRATOR