Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Rejected-Technical T Z FLAT 502 SHIVABHI LUXURIA MAKARPURA ROAD NEAR MANEJA CROSSING VADODARA GUJARAT 390013 UDYAM GJ 24 0024411 24AASCA3492P1ZX R S MSME STATUS AS VERIFIED | VADODARA | GUJARAT | 390013 | Rejected-Technical Rejected, not qualifying as per Qualification Criteria of Annex-1, Clause 2.0, Similar work experience |
| 3 | Rejected-Technical | Rejected-Technical Rejected, not qualifying as per Qualification Criteria of Annex-1, Clause 2.0, Similar work experience |
| 4 | Rejected-Technical MONARCH HOUSE SURVEY NO 50 2A B T KAWADE ROAD NANAI BAUG GHORPADI SINHGAD ROAD PUNE 411 036 | PUNE | MAHARASHTRA | 411036 | Rejected-Technical Rejected, not qualifying as per Qualification Criteria of Annex-1, Clause 2.0, Similar work experience |
| 5 | Rejected-Technical | Rejected-Technical Rejected, not qualifying as per Qualification Criteria of Annex-1, Clause 2.0, Similar work experience |
Tender Value
₹60.5 L
EMD Value
₹60,498
Closing Date
22 Aug 2022, 3:00 pmClosed
Lalit Kumar, General Manager
Lalit Kumar, General Manager/RCED, UI Division RITES Limited
Carrying out Topographic survey and allied works of 3 Tunnels and Procurement and Processing of satellite data for generation of Orthophoto, Base map and DTM for the 3 Tunnels and 100 km Road for PWD in the union territory of Ladakh
2022_RITES_124805_1
RITES/UI/RCED/UT Ladakh/Survey-HRSI/2022
Open Tender
Civil Works - Highways
Item Rate
90 days
work
Refer Tender Documents
6 documents required · 6 mandatory
₹2,500
Yes
Payable To RITES Ltd
₹60,498
Yes
19 Sept 2022
4 Aug 2022
23 Aug 2022
5 Aug 2022
22 Aug 2022
5 Aug 2022
5 Aug 2022 - 17 Aug 2022
Amount
Supply, procurement and processing of High Resolution Satellite Imagery
Supply of 0.5m -Ortho ready 4 Band Bundle High Resolution Stereo Satellite Imagery
Processing of 50 cm GSD Satellite Imagery and Generation of DEM, DTM, Ortho mosaic and QC report thereof. Submission of the NSSDA report
GCPs - Establishment of Ground Control Points at suitable interval on permanent structures with Paint marking and taking observations using DGPS for Rectification of satellite imagery
Description of Work / Item(s)
Amount
Supply, procurement and processing of High Resolution Satellite Imagery
Supply of 0.5m -Ortho ready 4 Band Bundle High Resolution Stereo Satellite Imagery
Processing of 50 cm GSD Satellite Imagery and Generation of DEM, DTM, Ortho mosaic and QC report thereof. Submission of the NSSDA report
GCPs - Establishment of Ground Control Points at suitable interval on permanent structures with Paint marking and taking observations using DGPS for Rectification of satellite imagery
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at suitable interval (every 2 kms approx.) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. (a) Raw DGPS data for the entire area of interest (b) shall be submitted in the format as directed by engineer-in-charge.
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at each portals of 3 tunnels (Total 6 Portals) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. Raw DGPS data for the entire length and adjoining areas of interest shall be submitted in the format as directed by engineer-in-charge. (ii) Construction of cast in-situ Permanent Control Point pillars of size 500mm x 500mm x 1000mm of RCC (Nominal Mix 1 :1.5:3) with provision of 700mm long M.S. angle of size 50 x 50 x 5mm with brass nailing on the MS angle for marking the Control Points and embossing the CP pillar number on the MS plate of size 125mm x 125mm x 150mm embedded in concrete by four 6mm dia rods lSOmm long as per approved drawing. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job.
Double Tertiary Levelling Survey of the area for establishment of vertical co-ordinates of Control Points and submission of survey report as per format approved by Engineer in charge. Quantity considered is for route of leveling length.
Development of Plan and L section of the Access Roads including staking of Access Roads to various proposed major work sites on the alignment from the existing roads with 100mm x 100mm x 750 RCC pegs. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job for RCC pegs.
Description of Work / Item(s)
Amount
Supply, procurement and processing of High Resolution Satellite Imagery
Supply of 0.5m -Ortho ready 4 Band Bundle High Resolution Stereo Satellite Imagery
Processing of 50 cm GSD Satellite Imagery and Generation of DEM, DTM, Ortho mosaic and QC report thereof. Submission of the NSSDA report
GCPs - Establishment of Ground Control Points at suitable interval on permanent structures with Paint marking and taking observations using DGPS for Rectification of satellite imagery
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at suitable interval (every 2 kms approx.) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. (a) Raw DGPS data for the entire area of interest (b) shall be submitted in the format as directed by engineer-in-charge.
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at each portals of 3 tunnels (Total 6 Portals) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. Raw DGPS data for the entire length and adjoining areas of interest shall be submitted in the format as directed by engineer-in-charge. (ii) Construction of cast in-situ Permanent Control Point pillars of size 500mm x 500mm x 1000mm of RCC (Nominal Mix 1 :1.5:3) with provision of 700mm long M.S. angle of size 50 x 50 x 5mm with brass nailing on the MS angle for marking the Control Points and embossing the CP pillar number on the MS plate of size 125mm x 125mm x 150mm embedded in concrete by four 6mm dia rods lSOmm long as per approved drawing. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job.
Double Tertiary Levelling Survey of the area for establishment of vertical co-ordinates of Control Points and submission of survey report as per format approved by Engineer in charge. Quantity considered is for route of leveling length.
Development of Plan and L section of the Access Roads including staking of Access Roads to various proposed major work sites on the alignment from the existing roads with 100mm x 100mm x 750 RCC pegs. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job for RCC pegs.
Description of Work / Item(s)
Amount
Supply, procurement and processing of High Resolution Satellite Imagery
Supply of 0.5m -Ortho ready 4 Band Bundle High Resolution Stereo Satellite Imagery
Processing of 50 cm GSD Satellite Imagery and Generation of DEM, DTM, Ortho mosaic and QC report thereof. Submission of the NSSDA report
GCPs - Establishment of Ground Control Points at suitable interval on permanent structures with Paint marking and taking observations using DGPS for Rectification of satellite imagery
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at suitable interval (every 2 kms approx.) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. (a) Raw DGPS data for the entire area of interest (b) shall be submitted in the format as directed by engineer-in-charge.
Establishing co-ordinates (in grid and ground co-ordinates system) of Control Points at each portals of 3 tunnels (Total 6 Portals) by carrying out DGPS survey along the approved alignment for setting out of works on the project and submission of DGPS survey report as approved by Employer. Raw DGPS data for the entire length and adjoining areas of interest shall be submitted in the format as directed by engineer-in-charge. (ii) Construction of cast in-situ Permanent Control Point pillars of size 500mm x 500mm x 1000mm of RCC (Nominal Mix 1 :1.5:3) with provision of 700mm long M.S. angle of size 50 x 50 x 5mm with brass nailing on the MS angle for marking the Control Points and embossing the CP pillar number on the MS plate of size 125mm x 125mm x 150mm embedded in concrete by four 6mm dia rods lSOmm long as per approved drawing. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job.
Double Tertiary Levelling Survey of the area for establishment of vertical co-ordinates of Control Points and submission of survey report as per format approved by Engineer in charge. Quantity considered is for route of leveling length.
Development of Plan and L section of the Access Roads including staking of Access Roads to various proposed major work sites on the alignment from the existing roads with 100mm x 100mm x 750 RCC pegs. The work included cost of material such as cement, reinforcement, aggregates; Tool & Plants, all lead & lifts, labour, shuttering, curing etc as a complete job for RCC pegs.
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .