CONSTRUCTION OF GRAMPANCHAYAT OFFICE BUILDING AT.LADZARI TQ. PARLI DIST. BEED

1)Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling. ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual MeansD I NO.21.01P NO. 153

2)Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means (D1 NO.21.05 P NO.153

3)Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.. DI NO.21.40 P NO.157

4)Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D I NO.24.01 P NO.175

5) Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) DI NO.25.11 P NO.178

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D I NO.25.31 P NO. 179

7) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D I NO.25.50 P NO.181

8) Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete..DI NO.27.03P NO.197

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. DI NO.21.37 P NO.157 A) With Availbale Qty as par I.NO.2

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. DI NO.21.37 P NO.157 B)With Contractors

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete D.I.NO.27.05 P.NO.197

Providing second class Burnt Brick masonry with conventional/ L.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. D1 NO.27.06P NO. 197

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) DI NO.26.05 P NO. 184

13) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) DI NO.25.70P NO. 182

14)Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.D I NO.26.33P NO.188

15) Providing and fixing Jungle (hard) wood of approved species joists and girders in timber floor of single, double or framed type including scaffolding if necessary and one primer coat etc. complete D.I.NO.37.04 Ρ.ΝΟ.230

16) roviding and laying telephone black / Amba White /Cadburybrown/Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.. D.I.NO.33.68 P.NO.220

17) Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete. D.L.NO.39.11 P.NO.246

18) Providing and fixing collapsible steel gate in one/two leaves with hot rolled vertical channels of 18 * 9 * 31 mm minimum size, crossings of M.S. flats of size 18 * 5 mm Tor E section for runner of minimum 40 * 6 mm size for flange, M.S. flat for top runner of minimum size 40 * 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (1.S. 105211983).. D.I.NO.39.26 P.ΝΟ.249

19) Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete D.L.NO.40.01P.NO.264

20) Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 Kilogram/One Running Metre, and window frame bottom track section 61.85 * 31.75 * 1.2 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 * 31.75 * 1.3 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 * 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 * 18 * 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 * 18 * 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary etc, complete. With colour Anodising with box. D.I.NO.39.37P.NO.251

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 * 19 mm for styles and 15 * 15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and of density 600 kg/cbm.of size 30mm thickness 70mm width out of which 50mm shall be flat and rails with 5 mm (+/ 0.25 )*30 mm PVC sheet beading on either side and joined together with D.I.NO. 39.47P.NO.3255

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.. DI NO.32.04P NO.209

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete DI NO.32.07P NO.209

Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590 mm to 605mm * 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. D.I.NO.33.40 Ρ.ΝΟ.217

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605mm * 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete D.I.NO.33.41 P.NO.217

Providing and laying matt finish ceramic tiles of having size 30cm * 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.D.I.NO.33.24P.NO.264

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. D.I.NO.33.25 P.NO.215

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with carthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete D.L.NO.42.30P.No.277.

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete D.L.NO. 42.15 Ρ.ΝΟ.275

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. DI NO.42.19 P NO.275

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersD I NO.42.53P NO.280

Providing and laying in trenches 20 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. DI NO.42.62P NO.281

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. DI NO.41.63 P NO.272

Providing and fixing 10 cm PVC nahani trap with grating etc. complete DI NO.42.67P NO.281

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. D.I.NO.36.12 P 227

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete..D.I.NO.35. 24 P.NO.225

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete D I NO.6.05P NO.46

Please Enable Macros to View BoQ information