Road patch repair work of area of EE-II and III, UIT Alwar. (Annual Contract 2025-26) NIT 01/2026-27/Item21

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type B as per MoRTH specification Clause 3004.2

Providing & laying penetration macadam patching upto 5 cm. depth ( semi grout) with 0.60 Cum. Of coarse aggregate (Crusher broken) & 0.15 Cum of key aggregate (as per MoRTH specification) & spreading of binder, cleaning area of patch, pot holes, cut of regular shape with vertical side, removing all loose & disintegrated material, spreading & compacting of aggregate with 8-10 tonne power road roller including cost of aggregate, fuel, lubrication, hire charges machinery, T & P, including cost of bitumen with application of tack coat.

Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3

Carriage of earth, sand, lime, morrum, manure or sludge including loading/ unloading etc. complete with lead upto 5km.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. by mechanical mean with all lead.

Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MoRTH specification : Clause 401]. By mechanical means For Grading-III Material

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Production, supply and fixing of Kandhal redimate cold bituminous patching mix in 50kg plastic lined, sturdy bags for repair of pot holes in adverse climatic condition including the bitumious mix with a minimum of 5.60% MC-800 cut back bitumen (containing a suitable antistripping agent) by weight of mix and in strict conformance to gradation and other requirement such as 6 month storage life as per specification, transportation with all lead and lift complete in all respects as per direction of engineer incharge.