Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹45.1 L+₹1.3 L (2.89%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹45.6 L+₹1.7 L (3.88%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹45.9 L+₹2.1 L (4.68%)Rejected-Finance C O PULAK SAHA MAHAKAL PALLY SURYASEN PARK MAIN GATE SILIGURI 734001 DIST DARJEELING | JALPAIGURI | WEST BENGAL | 734001 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹46.6 L+₹2.7 L (6.22%)Rejected-Finance OODLABARI P O MANABARI DIST JALPAIGURI WB PIN 735222 STATE WEST BENGAL | JALPAIGURI | WEST BENGAL | 735222 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
27 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SEVOKE ROAD
GE Sevoke Road Post Salugara Dist Jalpaiguri PIN 734008
CERTAIN LEFT OVER AND MISC ESSENTIAL WORKS AT TYPE VI CIVILIAN OFFRS ACCN AND SPL REPAIR TO BLDG NO T 116 AT SEVOKE STN UNDER GE SEVOKE RAOD
2022_MES_554781_1
GE/SEV/39 of 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE SEVOKE ROAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GE SEVOKE ROAD
₹88,000
Yes
14 Nov 2022
28 Sept 2022
29 Oct 2022
28 Sept 2022
27 Oct 2022
13 Oct 2022
29 Sept 2022 - 8 Oct 2022
60 days
Amount
Excavating in post holes (or similar holes) in soft/ loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
M&L for PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregated) as in foundation, filling and mass concrete complete all as specified.
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
Surface dressing n exc 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for broken stone boulders Hardcore of gauge exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and as directed.
M&L for providing and laying 60mm thickness factorymade chamfered edge cement concrete paverblock of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified and as directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out complete all as specified and directed
Demolition of brick work or stone/boulder masonary built in cement mortar complete all as specified and as direceted.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks in half bricks thick walls straight or curved on plan to any radius built in CM 1:4 complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in each layer in soft/ loose soil complete all as specified and directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L rendering 15mm thick in CM 1: 6 on fair faces of brick masonary walls finished even & smooth without using extra cement complete all as specified and as directed.
M&L for 20 mm thick rendering on fair faces of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of weather resistance acrylic emulsion paint over one coat of primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1mm thick wall care putty complete all as specified and directed. .
S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410 W Gde-E 250) Quality A complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc completed using ERW or induction butt wilded tubes confirming to IS 1161-1998 grade St - 240 complete all as specified and directed.
S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..
M&L for preparation new untreated steel surfaces of any description n. exc 10cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof wall etc complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.
S&F Mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlines to steel trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
M&L for precast RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in cover slab set in CM 1:6 including necessary formwork complete all as specified and as directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incuding cranking, bending spirally for hooping for columns, hooking ends and binding with and incuding mild steel wire (annealed), not less than 0.9mm dia or securing with clips complete all as specified.
M& L for Mild steel as in reinforced TMT bars 06 to 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for 200 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L for 150 mm nominal dia DWCPE pipe (SN-8) pipes ISI marked laid in trenches and jointed complete as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 200mm bore pipe complete all as specified and directed.
M&L fo PCC 1:3:6 (type C-2) (using 40mm graded crushed stone aggregate) as in bed for drain pipes including packing under and hauncing against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
S&F 150mm dia half round PVC (SWR) pipes with rounded edges including accessories like bend, 'T', etc for eaves gutter complete all as specified and as directed.
S & F 150 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S & F 150 mm bore PVC (SWR) bends with door of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends with door of any radius complete all as specified & directed.
M&L PCC 1:3:6 type C-2 (using 40 mm gradded crushed stone aggregated) as in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel n exc 30 cm inner grith in cement concrete using extra cement including forms moulds mitred stopped end complete all as specified and as directed.
S&F 15 mm bore medium grade galvanized steel water tubing concealed with all fittings and fixed to wall/ceiling or laid in floor complete all as specified. Note:- Cutting chases & making good shall be measured seperately.
S&F 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified.
S& F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.
S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.
S& F in repair 15 mm bore stop cock cast copper alloy with crutch or butterfly handle screwed down screwed (concealed type) for iron pipe complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:3) to concrete and finishing the surfaces even and smooth without using extra cement,(WPC shall be measured and paid seperately) complete all as specified and directed.
M&L for PCC 75 mm thick (1:3:6) type C-2 (40 mm graded crushed stone aggregate) as in plinth protection/Path/Hardstanding finished even including bitumen filer at joints and smooth using extra cement complete all as specified and as directed.
S&F designer corrossion resistant Stainless steel grade-SS-304 Single door thickness 25-30 mm hinged using heavy duty SS Hinges, SS-304 as in facing including all necessary fittings and Fixtures complete all as specified and directed.
S&F polished corrossion resistant Stainless steel grills grade SS 304 of silver colour for exterior opening including all necessary fittings and Fixtures complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
S&F rolled mild steel section including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE-290 Gde E-165. Complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Dismantling expanded metal n.exc 4 kg, any thickness or mesh, fixed with steel or wood fillets if any complete all as specified and as directed.
M&L for mild steel expanded metal cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel stapless supplied and fixed complete to wood or steel memberss n .exc 4 kg/sqm complete all as specified.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6mtr mean radius, built in cement mortar 1:6, complete all as specified and directed.
M&L for preparation of old decorated plaster surface of walls including washing, rubbing down and stopping of distempered surface and applying one coat of distemper (oil emulsion) of any tint complete all as specified and as directed.
M&L for Complete removal of existing treatment on wall surfaces and applying two coats of weather exterior emulsion paint over one coat of primer complete all as specified and as directed
M&L for PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregated) as in coping, bed plate, fillets and similar works includig rounded or chamferred on edges with necessary form work complete all as specified and as diected
M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for laying floor tiles finishes complete all as specified and as directed.
M&L for 10 mm thick rendering in cement mortar 1:3 on other than fair face of brick work for laying tiles on vertical surfaces complete all as specified and directed.
M&L for non skid coloured ceramic tiles of size 600mmx600mmx8 to 10 mm thickness in floor set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tiles complete all as specified and directed.
M&L for non skid coloured ceramic tiles of size 600mmx600mmx8 to 10 mm thickness in skirting set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tiles complete all as specified and directed.
M&L for coloured 450x350x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match complete all as specified and directed.
Dismantling of wall and & ceiling boards (fiber,pilp, insulation,etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete as specified and directed.
S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)
Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section in any position as in framed works complete all as specified and as directed.
M&L 2nd class hard wood (SAL) in scantling fixed in clean sawn complete all as specified and as directed.
All as per item No 71 but except timber complete all as specified and as directed.
S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, size of frame 125mm x 60mm including one shop coat of Zinc Chrome primer complete all as specified and as directed
S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.
Supply and fixing 2nd class hard wood factory made 35 mm thick glazed skelton shutters (three panel) open rebated and prepared to receive glass, gauge etc edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, with sizes of members of shutters as specfied in para 8.24 (a) ;SSR 2009 (part-I) s complete all as specfied and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy complete all as specified and directed.
S&F aluminum anodized barrel tower bolts of extruded section, 200mm long, ISI marked, complete all as specified.
S&F aluminum anodized handle cast type , 150mm long, ISI marked, complete all as specified.
S&F aluminum anodized handle cast type , 100mm long, ISI marked, complete all as specified.
S&F MS butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.
S&F MS butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tined tacks, or galvanised wire stapless complete all as specified and as directed.
M&L for preparation new wooden surfaces of any description over 10cm width of grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wire gauze etc and as in wind ties for roof complete as specified and directed.
M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing complete all as specified and directed.
S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.
Demolition of (reinforced) cement concrete of any description and in any position not otherwise sepcifically provided for complete all as specified and directed.
M&L for RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in nominal mix as in fins, facias, chajja, lintel etc complete all as specified and directed
Use and waste formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams for rough finished, flat surfaces etc complete all as specified and directed.
S&F curtain rods 20 mm dia stainless steel including fixing brackets, stops, rollers etc, complete al as specified and directed.
Taking down carefully copper/Aluminum point wiring light fan, socket or power complete (fittings such as switches ceiling roses pendants, regulators, sockets, sketch light fittings, tube light fittings etc. to be measured separately if found serviceable) and removing unserviceable materials from site of work and segregating serviceable materials for safe custody and making good to disturbed surfaces of walls, floors, etc. including disconnecting of ceiling fan/exhaust fan complete all as directed
Taking down old unserviceable Main Switch, DB's consisting of MCBs wooden/GI/MS sheet board etc for kept in store and for later use all as directed.
Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces all as directed.
M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.
All as per Item Sl No - 95 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.
All as per Item Sl No - 95 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.50 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.
All as per Item Sl No - 95 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point with switch on same board complete.
M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.
M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete all as specified all as directed.
M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete all as specified and as directed.
S&F switch piano flush type, single pole 5 Amp 230 Volt all as specified and as directed.
S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all as specified and as directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type LED fitting of 20 watt 4 feet with Aluminium extruded batten luminaire for 230 volt AC complete all as directed by EIC.
M&L LED street light of capacity 30 watt in Aluminium PDC housing, with IP66 protection complete all accessories with connection PVC copper wire not exc 5 mtr and all as specified and directed.
Taking down existing u/s FTL light fitting and S&F in repair decorative box type, 10 watt 2 feet with Aluminium extruded batten luminaire for 230 volt AC complete all as directed by EIC.
Taking down ceiling fans/exhaust fan of any size,dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F energy efficient 5 star BLDC ceiling fan 230V, 1200 mm sweep without remote with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.
S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.
Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way, with rated bus bar single pole &netural double door for MCB, including cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.
Supply & Fixing MCB double pole (DP) 240 volts of capacity 32 Amp ,C curve, complete all as specified and as directed.
S&F MCB, SP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as directed.
Material and labour for concealed sub main wiring with two nos single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories complete all as specified and as directed.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead including common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep in soft/loose type soil getting out and levelling of bottom surface to required level for cable/stay complete all as specified and directed
Supply and laying in trenches/wall LT UG XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core including making necessary connections all as specified and directed.
Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.
Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.
Supply and fixing GI pipe 40mm bore medium grade for cable protection complete all as specified and as directed.
SRI SURAJIT SENGUPTA
M/S Bikash Saha
MARWA CONSTRUCTION
AJOY PAUL
ASSOCIATED TRADING CORPORATION
TAPASH SAHA
M/S TARAN INFRACON
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .