Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.4 Cr
EMD Value
₹2.4 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of Central Sterile Services Department (CSSD) under National Health Mission in the Sambalpur district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/028
NBCC/ODISHA/ZO/NHM/NIT/22-23/028
Open Tender-Domestic
Civil Works General
Sambalpur, Odisha
₹11,800
₹2.4 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation of foundation
trenches in hard soil including dressing of
sides and levelling the bed up to the
required depth and depositing the
excavated materials away from the work
site within 50m initial lead & 1.5m initial
lifts with sundries & T&P required for the
work complete including cost of all
labour,labour cess,T&P,sundries etc. as
directed by the Engineer in charge.
Filling in foundation trenches and plinth,
with excavated earth including laying the
earth in layers not exceeding 23.5 cm thick
ramming & watering with all leads & lifts
including cost of all labour,T&P completed
as directed by the Engineer-in-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Diluting and injecting chemical emulsion for
PRE CONSTRUCTIONAL Anti-termite
treatment and creating a continuous
chemical barrier under and all-round the
column pits, wall trenches, basement
excavation, top perimeter of building,
expansion joints, over the top surface of
5 4 consolidated earth on which apron is to be Sqm 1392.10 162.84 2,26,689.56
laid, surroundings of pipes and conduits etc.
complete as per specifications (plinth area
of the building at ground floor only shall be
measured for payment) including cost of all
materials, labour, T&P etc complete in all
respect and as per direction of the Engineer-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing and laying plain cement concrete
1:2:4 (1 cement: 2 sand: 4 stone
aggregate 12mm nominal size) as levelling
course in foundation and plinth etc.
including tempering, curring, shuttering
etc.complete all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
First class Fly ash Brick masonry using
bricks of size 25 cm. x 12 cm. x 8 cm.
having crushing strength not less than 75
kg. Per. Sqr. Cm. in cement mortar of mix(
1:6) with ordinary Portland slag
cement(PSC) and screened & washed sand
for mortar after immersing the bricks for 6
(Six) hours in water before use in
8 7 Foundation & Plinth including splays cutting, Cum 34.37 5080.61 1,74,620.50
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-Charge.
Fly Ash. brick masonry of size 25 cm. x 12
cm. x 8 cm. having crushing strength not
less than 75 kg. Per Sqr. Cm. in cement
mortar of mix (1:6) with approved grade
cement and screened & washed sand for
mortar after immersing the bricks for 6
(Six) hours in water before use in
Superstructure including splays cutting,
circular moulding, corbelling, chamfering
and similar such type of works, watering
and curing etc. including cost, conveyance,
loading, unloading, royalties and taxes of all
materials, cost of all labour, scaffolding,
sundries, T&P required for the works etc.
complete in all respect as directed by the
Engineer-in-charge
Half brick work with Fly Ash brick masonry
in cement mortar (1:4) in super structure
having a crushing strength of not less than
75 kg./sqcm with dimensional tolerance ±
2% including splays cutting circular
moulding chamfering and corbelling and
similar such type of works with all
12 11 necessary projections watering and curing Cum 5.62 5357.91 30,111.44
after immersing the bricks in water at least
for six hours before use including cost,
conveyance, royalties and taxes of all
materials with all labour,labour cess and T
& P required for the work complete in all
respect as per direction of Engineer-in-
Charge.(Ground floor)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
16 15 b) Column up to plinth Cum 16.87 13136.23 2,21,608.23
18 17 d) Column above plinth Cum 39.16 13136.23 5,14,414.85
23 22 a)Column up to Roof Beam Lvl. :- Cum 1.34 14692.18 19,687.52
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 12 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Providing 16 mm thick cement plaster with
cement mortar of mix (1:6) with screened
and washed sharp sand for mortar and
finished smooth to the rough surface of
walls in all heights after racking out joints
including watering and curing, rounding of
corners, providing grooves where ever
necessary with cost, conveyance, royalties
of all materials with cost of all labour,labour
cess, T&P, and scaffolding required for the
work etc. complete in all respect as directed
by the Engineer in charge.
Providing 6 mm thick cement plaster with
cement mortar of mix (1:4) with screened
and washed sharp sand for mortar and
finished smooth to R.C.C. work after closed
deep chipping & slurry treatment including
watering and curing, rounding of corners,
providing grooves where ever necessary
with cost, conveyance, royalties of all
materials with cost of all labour,labour cess,
T&P, and scaffolding required for the work
etc. complete in all respect as directed by
the Engineer in charge.
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.40 sqm. (20mm thick) of
approved make in floors laid on 20 mm
thick cement mortar (1:4) (1
34 33 cement : 4 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Granite Tiles of
minimum Above 0.10 Sqm & up to 0.4 sqm
(10mm. thick) of approved make in dadoes
laid on 12 mm thick cement mortar (1:3)
36 35 (1 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
Ib). laid on 20 mm thick cement mortar
(1:4) (1 cement : 4 course sand) and filling
joints with white cement of approved
quality including cost of all materials, labour
T&P etc. required for the work all complete
as per direction of the Engineer-in-charge.
Supplying, fitting & fixing of 8-10 mm thick
& size of 600x600 mm Glaze vertified
floor tiles of matt finish with veilcraft (VC )
shield( Scratch free/stain free) with water
absorption limit between 0.08% to 3% and
conforming to IS : 15622:2006 (Group B
40 39 Ib). laid on 12 mm thick cement mortar 0 0.00 0.00 0.00
(1:3) (1 cement : 3 course sand) jointed
with slurry mixed with pigment to match
the shades of the tiles etc. complete
including cost of all materials, labour T&P
etc. required for the work all complete as
per direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Antiskid
Ceramic Floor Tiles in flooring in toilets
using Digital matching anti-skid ceramic
floor tile (having minimum thickness 7 mm
to 8 mm & size 300 mm x 300 mm )
confirming to I.S 13755 of approved quility
and shade on 20mm thick ded of cement
morter of mix (1:4) laid in proper slope and
gradient with screened & washed sharp
river sand for mortar and grouted with neat
white cement slurry, joining the anti-skid
ceramic floor tiles with neat white cement
slurry, mixed with required (tiles are to be
immersed in the water for required time
before use) quantities of pigments of
approved marks to match the shades of the
anti-skid ceramic floor tiles if required
including cost, conveyance, loading,
unloading, stacking, royalties of all
material, cost of all labour , sundries, T&P
required for the work , watering,complete in
all respect as per specification excluding
GST aas per specification as directed by
Engineer-in-charge
Supplying, fitting & fixing of 300mm x
600mm Germ free Glaze Ceramic wall tiles
having thickness 6.5mm to 7.0 mm
confirming to IS 13753 in dadoes, skirting
and risers of steps laid on 12 mm thick
cement mortar (1:3) (1 cement : 3 course
sand) jointed with slurry mixed with
pigment to match the shades of the tiles
etc. complete including cost of all materials,
labour T&P etc. required for the work all
complete as per direction of the Engineer-in-
Supplying, fitting & fixing of Kota Tiles of
minimum 16 mm thick Above 0.10 Sqm on
25mm thick bed of cement mortar (1:1) (1
cement : 1 course sand) jointed with neat
cement slurry mixed with pigments to
match the shades of the tiles including
rubbing and polishing complete including
cost of all materials, labour T&P etc
required for the work all complete as per
direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing of Kota Tiles of
minimum 16mm thick and above 0.10 sqm
of approved make in dadoes laid on 12 mm
thick cement mortar (1:3) (1
48 47 cement : 3 course sand) and filling joints 0 0.00 0.00 0.00
with slurry including cost of all materials,
labour T&P etc. required for the work all
complete incl. rubbing as per direction of
the Engineer-in-charge
Providing and fixing seasoned sal wood
work in frames at any locations including
doors, windows,cupboard, clerestory and
other frames fixing in position including
cost of hinges, M.S. flat (30mm x 6mm)
hold fasts lugs or dash fasteners of
required dia and length as per drawing /
specification, at all floors and all heights.
Supplying, fitting and fixing Factory made
32mm thick flush door, both side laminated
with 1mm mica of Green Ply / Century /
Mayur or equvalent make with seven years
guarantee against termite and borer etc.
complete with wooden hinged cleats
including cost of Aluminium fittings like
Tower Bolt, Handel, Aldrop, Hinges, Screw
etc., with cost conveyance and taxes of all
materials, all labour etc. complete in all
respect as per direction of Engineer-in-
Supplying and fixing of Anodisied 15
microns / Powder coated 50-60 microns
approved colour aluminium 50mm
Casement series door cum fixed Unit with
suitable aluminium extrued profiles. the
system should design to accommadate 5mm
clear Toughen glass 50% and 50% 4MM
ACP. the rate inclusive of hardwares like
54 53 antilift,roller, espag lock cum handle,epdm 0 0.00 0.00 0.00
gaskets, felt along with all accessories etc
complete. the gap between the wall and
window will be filled with silicon weather
sealent in the outer side.Casement Door
Outer frame ( 50*46 mm SERIES) Sash -
78.5 * 58 mm ) + Mullion 66 * 50mm +
Beeding 35.5 *25.5 mm) Make -
WINPLUS+ / ALUPURE / ALUK
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made FRP( Altematly called GRP)
door frame of size 75mm x 100mm
fabricated using E - glass chopped strand
mat (CSM) U.V stabilised inopathalic Gel
coat and impregnated with inopathalic resin
The thickness of the GRP skins shall not be
less then 2.0 mm . The door frame consists
of four segments which are provided with
plug in socket arrrangement in-situ-in
mould. The segments are plugged in and
are joined together by means of srew. The
GRP frame shall be provided with wooden
reinforcement on six locations for high srew
holding capacity for fixing metalic hold fast
and shall be consolidated by filling with
medium density foam / plaster of paris with
fibre reinforcement , six number of 260mm
x 25mm x 5mm size 'S' shaped M.S flat hold
fast shall be provided with the frame. The
material and process for manufacturing the
finish of door frame shall conform to RV-
TIFAC composites Design centre's standards
and specifications . The finish of door frame
will be plain colour white /Ivory/Beige/Light
grey / Golden brown / Mahogany/ Teak
wood /sand stone Champagne/Pastel blue
or any other colour using high quality
pigment complete in all respect as per
specification and direction of the Engineer in
Charge. etc. complete
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made GIRID FRP or called GRP
sandwich composite door shutter of 32mm
thick laminated with two GRP skin with
good grain finish fabricated using UV
stabilised isoppthalic gel coat and one layer
of 450 gsm E-glass chopped strand mat
(CSM) impregnated with ortopathilic resin
The thickness of the skins shall not be less
than 1.50mm . Expanded polysryne ( EPS)
structural foam panel of 29 mm tickness
and a density of 20kg/cu.mts shall be used
as core material wooden reinforcements
made of sesasoned sal wood block of cross
section not less than 28mm x 32mm and
58 57 also necessary sal wood reinforcements for 0 0.00 0.00 0.00
fitting the metal fittings such as lower bolts
,aldrops, handles etc. shall be provided . A
structural adhesive compatible with
(EPS)foam shall be used for bending the
core material. the sal wood reinforcements
and the skin The material and process for
manufactuing te door shutter shall conform
to RV -TIFAC components design centre's
standards and specification and the door
shutters tested in conformation to IS 4020-
1998. The Finish of door shutter will be
plain colour as per specification and
direction of the Engineer in Charge. etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing factory made 2.5 track
KOMMERLING uPVC white colour sliding
window with bugmesh comprising of uPVC
multi-chambered frame having section
Frame 88mm x 49mm, Window sash:
37mm x 61mm, Bugmesh sash: 58mm x
32mm made out of lead free green profiles
with corners fusion welded, fully reinforced
with Galvanized steel 1.5 mm. The windows
profile should fulfill the requirements of
Viny 2010. The physical properties of the
profiles like Vicat softening temperature,
density, tensile strength, hardness,
weatherability, impact strength and
60 59 Modulus of Elasticity should be tested in 0 0.00 0.00 0.00
accordance with ASTM/DIN-ISO standards
and the thermal conductivity as per IS
standards. The window comprising of uPVC
extruded glazing beads of appropriate
dimension, EPDM gasket, G.I fasteners 100
x 8 mm size for fixing frame to finished
wall, plastic packers, plastic caps and
necessary stainless steel screws etc. After
fixing frame the gap between frame and
adjacent finished wall shall be filled with
weather proof silicon sealant over backer
rod of required size. The sash will be fitted
with 5mm clear glass ( Toughen ). Make -
KOMMERLING / FENESTA / RIHAU
Supplying, fitting & fixing in all floors of
M.S. grills, grill gates, M.S. gates, garage
door, collapsible gates with top and bottom
rails, steel windows, critical frames for
windows, stair case and parapet railing
made out of M.S Square bar/ flat including
stair case hand railing with 40mm. dia
G.I.pipe etc. including painting two coats
over a coat of redoxide primer as per
approved drawing and design with cost of
all materials & labour, taxes, labour cess,
T&P, sundries etc. complete in all respect as
per specification & direction of the Engineer-
Priming one coat with wall cement primer
(water bound) to make an even finished
surface in all floors and heights to wall
surface of approved make and shade
including sand papering, applying putty
wherever necessary & cost of scaffolding,
staging charges with cost, conveyance,
taxes of all materials, cost of all
labour,labour cess T&P etc. complete as per
the direction of the Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with approved anti-
fungal weather seal paints (ISI) of approved
colour, shade on wall surface over a coat of
wall primer(ISI) water bound including sand
67 66 papering, polishing the surface, cost, 0 0.00 0.00 0.00
conveyances of all materials and cost of all
labour,labour cess with T&P etc, complete
as per specification & direction of Engineer-
Finishing plastered surfaces of walls with
cement based wall putty (Water based) of
approved make and finishing the surface
smooth and even by sand papering to
receive painting in walls, at all heights with
staging wherever necessary with cost,
conveyance, taxes of all materials, cost of
all labour,labourcess, all T&P etc. required
for the work complete in all respect as per
the direction of the Engineer-in-charge.
Painting two coats with approved plastic
emulsion paint over a coat of wall primer of
make Dulux / Berger / Asian to inside
surface of walls finished with Acrylic Wall
putty (water based) of make (Birla / JK)
and finished smooth & even surface to
receive painting using roller to the final coat
72 71 including cost of scaffolding staging charges 0 0.00 0.00 0.00
with cost, conveyances, taxes of all
materials, cost of labour, T&P required for
the work etc. complete for all floors as per
specification & direction of the Engineer-in-
Note :- Sample of Paint & Primer shall be
approved before procurement and use.
Painting two coat with approved synthetic
enamel paint to new wood work over a coat
of Red oxide primer including cost,
conveyances, royalties, taxes of all
materials and cost of all labour with T&P
required for the work etc. complete as per
specification & direction of Engineer in
Painting two coats to new Iron work with
approved enamel paints of approved colour,
shade including sand papering, polishing
76 75 the surface, cost, conveyances, taxes of all 0 0.00 0.00 0.00
materials and cost of all labour,labour cess
with T&P etc, complete as per specification
& direction of Engineer-in-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting and fixing of Stainless
steel of 304 grade in hand railing using
50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @
0.90mtr. C/C and stainless square pipe
bracing of size 32mm x 32mm x 2mm in 3
rows in stair case as per approved design
and specification, buffing, polishing etc with
cost, conveyance of all materials, cost of all
labour,labour cess, T&P etc. required for the
work complete in all respect as per direction
of the Engineer-in-charge.
Providing 2.5cm thick Grading Concrete
over roof slab with cement concrete (1:2:2)
using 6.7mm size black hard granite
crusher broken chips and screened &
washed sharp sand for mortar and finished
smooth to the rough surface of slab
including watering and curing with cost,
conveyance, royalties and taxes of all
materials with cost of all labour, labour cess
and T&P required for the work etc. complete
in all respect as directed by the Engineer in
82 0 Sub-Total of Civil Works 0 0.00 0.00 2,02,71,789.53
83 0 Plumbing Works 0 0.00 0.00 0.00
84 1 INTERNAL PH WORK 0 0.00 0.00 0.00
Providing all materials, labour, T&P for
fitting and fixing white glazed vitreous china
water closet (European pattern) with seat
cover (solid) and Cistern of approved make
in all floor including supply of sutaible
85 2 bracket, PVC wall plug and Brass screws NOS 2.00 6070.86 12,141.73
etc. all complete including cost, taxes and
conveyance as per specification all complete
as per direction of Engineer-in-charge.
Make:HINDWARE/PARRYWARE/CERA.
(As per Cat no. WHT-551 of Jaquar)
Supply all materials and labour for fitting
and fixing of following size Half Pedestal
wash hand basin of approved make in all
floor of approved quality including cutting
the walls & floor and making good the
86 3 damages with cement concrete etc. NOS 2.00 6444.81 12,889.61
including all taxes, duties, transportation
etc. all complete as per direction of EIC.
(Make: JAQUAR/HINDWARE/PARRYWARE)
(As per Cat no. Jaquar make having cat no -
Supplying all materials, labour, T&P and
fixing with labour ,T&P as per specification ,
the following Brass/ CP (Hindware) / G.M.
87 4 fittings at appropriate locations to thr pipe 0 0.00 0.00 0.00
lines at all floors and at all heights, of
approved make confirming to relevent IS
specification . etc complete in all respect.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Health Faucet ABS SS braided hose 1.2 m
with CP hook.
(As per Cat no.ALD-579 of Jaquar)
(Make: Jaquar/Hindware)
Two-way Bibcock with wall Flange.
89 6 (As per Cat no.FLR-5041N of Jaquar) 0 0.00 0.00 0.00
(Make: Jaquar/Hindware)
15mm dia pillar cock .
(As per jaquar Cat No- FLR-5011N)
15mm dia Angle Stop cock with Wall Flange.
92 9 (As per Cat no. FLR-5053N of Jaquar) NOS 6.00 1768.82 10,612.92
(Make: Jaquar/Hindware)
Providing and fixing 700x500 mm beveled
edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard
board ground fixed to wooden cleats with
C.P.brass screws and washers complete.
(As per Cat no.-Jaquar of Make-B3510106).
94 11 Rectangular shape 700x500 mm NOS 2.00 1835.49 3,670.98
C.P. Soap Dish holder.
(As per Cat no.ACN-1177N of Jaquar)
Bib cock with wall Flange.
(As per Cat no.FLR-5047N of Jaquar)
32 mm C.P. Bottle Trap 32mm with 250 &
190 mm Long Wall Connection pipe & wall
(As per Cat no.-ALD-769L250X190 of
Jaquar) (Make: Jaquar/Hindware)
32mm dia C.P.waste coupling 32mm SS
(Full Threaded)
(As per Cat no.ALD-705 of Jaquar)
(Make: Jaquar/Hindware)
Providing and fixing Stainless Steel Double
Bowl Sink withDrain Board Undermount -
Matt Finish (47” L x 19” W x 8” D)
(Parryware, Cat no.-C856799 with C.I.
brackets and stainless steel plug 40 mm,
99 16 including painting of fittings and brackets, 0 0.00 0.00 0.00
cutting and making good the walls wherever
Providing 15 mm dia Sink cock of Hindware
having cat no - F110021, including painting
of fittings and brackets, cutting and making
good the walls wherever required :
Fitting and fixing Water purifier for drinking
purpose (with rate of recovery 60-65%)
102 19 purifier water , water inlet and drain out NOS 1.00 23600.00 23,600.00
connections complete in all respects similar
Floor drain 160x160 mm dia stainless steel
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC) pipes IS 15778,SDR-13.50
having thermal stability for hot & cold water
supply, including all CPVC plain & brass
threaded fittings, i/c fixing the pipe with
clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step
CPVC solvent cement and the cost of cutting
chases and making good the same including
testing of joints complete as per direction of
Engineer in Charge.
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
106 23 Ground Floor meter 12.00 343.97 4,127.64
108 25 Ground Floor meter 5.00 434.95 2,174.74
Providing and fixing Chlorinated Polyvinyl
Chloride (CPVC)pipes having thermal
stability for hot & cold water supply
including all CPVC plain & brass threaded
fittings This includes jointing of pipes &
fittings with one step CPVC solvent cement,
trenching, refilling & testing of joints
complete as per direction of Engineer in
Make:SUPREME/ASHRIVAD/AKG/SENTINI.
112 29 50 mm nominal outer dia Pipes meter 50.00 1449.39 72,469.70
Supply, Fixing, jointing, testing and
commissioning of uPVC SWR pipe type B
(SWR) pipes(SCH-80) for Soil - waste &
113 30 Kitchen waste pipe cut to required lengths 0 0.00 0.00 0.00
including all necessary fittings and specials
such as bends, junctions offsets, access
Supplying all materials,labour and T&P for
fitting and fixing of following dia UPVC (SCH-
80) Rain water pipes and fittings along with
fixing to wall complete in all respect.
Providing, laying and jointing PVC SWR soil,
waste and vent pipes under floor
/suspended under ceiling / fixed on the wall
face conforming to IS:15905-2011 , ISO-
6594 Includes necessary fittings like (plain
or door)tees, bends, collars, crosses
reducers, Y, etc, of approved make, drip
seal joint, suspended under ceiling /
embedded in floor. Includes making
connection with sanitary fittings,of
approved make etc all complete .(As per
Supreme/Kishan etc)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
127 44 75 mm Pipe Wall Clamp Nos. 8.00 27.14 217.12
128 45 100 mm Pipe Wall Clamp Nos. 8.00 38.35 306.80
Providing, fixing, jointing and testing PP
mineral filled low noise level Soil & Waste
piping system as per BS EN 1451, SN4-S16,
with minimum density for pipes and fittings
1.4 gm/cm3. Pipes and fittings made from
Polypropylene-M (mineral reinforced) and
available from 50 – 160 mm with push fit
SBR type rubber ring sockets for easy
installation. Pipes should have 3 layer
design. Should have hot water resistance up
95ºC for short term loading (90ºC for long
term loading). Piping system should have
chemical resistance of pH 2-12. Fittings
should have swept design from 75-160mm
and depth gauge for proper fittings against
129 46 thermal expansion and contraction, should 0 0.00 0.00 0.00
have top marking at every 15° intervals in
angular rotation for better alignment. Piping
system includes all required fittings &
accessories such as coupler, bend, tee, Y,
reducer, access pipe, multi floor traps,
Nahni trap with extension piece etc. for
conveying soil, waste & rainwater purpose
in floors, ceiling suspended, or on walls,
with leak proof joints etc. Setting the pipe
in 1:2:4 CC in case of concealed plumbing,
wall chasing, holes, supporting, clamping,
covering back with chicken mesh & plaster
and making the wall good as per approved
shop drawing. Testing as per tender
specifications/EIC.
Providing all materials, labour, T&P for
fitting & fixing of following Bronze Ball
Valves confirming to IS-778 with ISI mark
in all floor & fixing with the pipes after
cutting the pipes to required shape & size
131 48 including wastage etc. of following nominal 0 0.00 0.00 0.00
diameter, all complete including testing the
joints with required water pressure.The cost
inclusive of all taxes,duties,transportation
scaffolding etc. all complete as per
specification and direction of Engineer-in-
Providing all labour,T&P for cutting holes in
bricks or stone masonry wall for taking
pipes in all floors and making good the
damages with cement concrete 1:2:4
134 51 finished smooth with CP 1:4 to original 0 0.00 0.00 0.00
shape including cost of all materials, curing,
conveyance, taxes, duties etc. all complete
as per specification & direction of Engineer-
For 25mm to 110mm dia pipe to pass in
250mm thick wall
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing all labour,T&P and cutting holes in
RCC chajja/roof/floor for taking pipes
through and making good the damages with
supply of all required materials etc.
complete as per the direction of the
Engineer-in-charge.
137 54 Square Gully trap 110mm (IP) No. 2.00 807.12 1,614.24
141 58 5 KLD SEPTIC TANK FOR 0 0.00 0.00 0.00
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
142 59 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
145 62 exceeding 15cm in depth: consolidating CUM 14.90 130.86 1,950.02
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling in plinth with sand
under floors, including watering, ramming,
consolidating and dressing complete.
1:4:8 (1 Cement : 4 coarse sand (zone-III)
derived from natural sources : 8 graded
stone aggregate 40 mm nominal size
derived from natural sources)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and applying two component high
performance polymer modifed cementitious
waterproofing coating, Dr.Fixit Fastflex of
Pidilite or approved equivalent having
minimum elongation of 120% , shore A
hardness of 60 as per ASTM D 2240 and
food grade certification by CFTRI applied
@2Kg/sqm in two coats, including
reinforcing the coating with 45gsm glass
fibre mesh between the coats at all corners
and change in directions. The coating shall
be applied on the entire horizontal and
300mm above the FFL on the vertical
surface as per manufacturer's
153 70 recommendation. The system includes base SQM 22.48 601.80 13,525.46
preparation of cleaning, brushing and
removal of flacky materials, grouting the
porous area with cementitious grout,
sealing the minor cracks, proper coving
between slab and wall junctions and pre-
wetting the surface to attain SSD condition
before application of the waterproofing
coating, followed by the application of
waterproof coating. The waterproofing
system should be applied directly by the
manufacturer with 10 years of insurance
backed system warranty against leakage.
Mode of measurement will be actual area
154 71 12 mm cement plaster of mix : 0 0.00 0.00 0.00
156 73 Neat cement punning. SQM 33.24 80.00 2,659.33
Supplying and fixing 900mm dia SFRC cover
without frame for manhole including cost of
all materials, T&P, labour etc complete as
per direction of Engineer-in-charge.
2.5 cm thick grading concrete (1:2:2) on
158 75 roof slab with 6.7mm & down grades size sqm 8.87 352.23 3,124.28
hard granite crusher broken chips
INSPECTION CHAMBER(750X750X750) MM
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
160 77 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
162 79 exceeding 15cm in depth: consolidating CUM 12.82 130.86 1,678.20
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
170 87 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
172 89 Neat cement punning. SQM 10.00 27.38 273.76
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
GULLY CHAMBER(250X250X250)MM IN 2
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
175 92 plan), including dressing of sides and 0 0.00 0.00 0.00
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Filling at all depth with available excavated
earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
177 94 exceeding 15cm in depth: consolidating CUM 0.89 130.86 116.70
each deposited layer by ramming and
watering complete (lead upto 100m) as
directed by the Engineer-In-charge.
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
Providing and laying plain cement concrete
1:4:8 (1 cement : 4 sand : 8 stone
agregate 40mm nominal size) as levelling
course in floor and plinth including
tempering, curring, shuttering etc. complete
all depth and height.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
12mm cement plaster to out side of brick
surfaces with cement mortar of mix 1:4 (1
185 102 cement : 4 fine sand) including necessary 0 0.00 0.00 0.00
scaffolding, curing etc. all complete at all
floors and all heights.
187 104 Neat cement punning. SQM 2.00 27.38 54.75
2.5 cm thick A.S Flooring in C.C (1:2:4)
including punning using 12 mm size C.B
hard granite chips with cost of all labour &
other materials etc complete.
189 106 SEWERAGE PIPE LINE TRENCH 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Earth work in excavation by mechanical
means (Hydraulic excavator) / manual
means in foundation trenches or drains (not
exceeding 1.5 m in width or 10 sqm on
190 107 plan), including dressing of sides and cum 17.50 235.53 4,121.74
ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as
directed, within a lead of 50 m.
Providing and laying in position cement
concrete of specified grade excluding the
cost of centering and shuttering - All work
up to plinth level :
1:4:8 (1 Cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size)
Supplying and filling sand in foundation and
over areas including watering, ramming,
consolidating and dressing, labours, tools,
taxes etc. all complete as per the
specification and direction of Engineer-In-
194 111 Sand filling in drain trench cum 1.50 601.33 901.99
Supplying and filling in for CC lining 75 mm
all arround on PVC pipes and base along
195 112 with Jamuna sand under floors, including cum 1.85 884.17 1,637.27
watering, ramming, consolidating and
dressing complete.
196 113 EXTERNAL DRAINAGE 0 0.00 0.00 0.00
Earthwork in excavation in all types of soil
for site leveling, Drain and other civil works
upto 1.5 metre and stacking the soil
197 114 including dewatering, removing 0 0.00 0.00 0.00
slush,shoring and strutting (as required),
complete as per specification and as per the
directed of the Engineer-In-Charge.
Filling at all depth with available excavated
earth (excluding rock) in Drain sides in
layers not exceeding 12 cm in depth:
consolidating each deposited layer by
ramming and watering complete all as per
the directed of the Engineer-In-charge.
Providing and laying plain cement concrete
1:4:8 (1 cement: 4 sand : 8 stone agregate
40mm nominal size) as levelling course in
200 117 Drain etc. including tempering, curring, Cum 8.00 4885.67 39,085.38
shuttering etc. complete all depth and
height as per the direction of Engineer-In-
201 118 Reinforced Cement Concrete 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing, lifting, hoisting and laying
Reinforced cement concrete of M-25 grade
as per approved designs and drawings
having a minimum compressive strength (in
work test) 250 Kg. / Square cm. in 15 cm.
cubes at 28 days after mixing and test
conducted in accordance with I.S. 516 using
12 mm. to 20 mm. size black hard crushed
broken granite stone chips and screened
and washed sharp sand for mortar of
approved quality from approved quarry,
washed and cleaned ( 20mm. size chips not
to exceeds 25 % ) to be mixed in concrete
mixture with Portland slag cement (PSC)
including hoisting, lowering, laying and
compaction concrete by using vibrators,
watering and curing for 28 days, centering
and shuttering then after dismantling and
removing debris from the work site and
finishing the exposed surface smooth
providing grooves or beads wherever
necessary including cost, conveyance,
loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T
& P required of the work etc. complete in all
respect as directed by the Engineer-in-
Charge. But excluding cost and conveyance
of M.S. rods or Tor steel and binding wires
and labour charges for straightening,
cutting, bending etc. of M.S. rods or tor
steel tying the grills and placing in proper
203 120 Drain Bottom slab Cum 12.00 6512.89 78,154.70
Supplying Cutting, straightening coiled or
bent up M.S. Rod or tor steel of primary
steel producers such as SAIL / TATA / RINL
/ JINDAL STEEL / SHYAM STEEL (grade Fe-
500D) etc. including bending, binding,
welding and jointing if necessary and tying
the grills and placing in position as required
for R.C.C. Work and for providing fan hooks
as required, hoisting, lowering, laying
including cost, conveyances of M.S. Rod or
tor steel and binding wires of 18 to 20
gauge and labour required for the work for
bending, binding and tying the grills in all
floors with labour cess etc. (payment will be
made on standard weight of B.I.S. for M.S.
Rods or tor steel only) etc. complete as per
specification & direction of Engineer-in-
207 124 Plastering work 0 0.00 0.00 0.00
12mm cement plaster on external RCC/brick
surfaces in cement mortar 1:4 (1 cement :
4 coarse sand) with a floating coat of neat
cement punning including necessary
scaffolding, curing etc. all complete at all
floors and all heights.
209 0 Sub-Total of Plumbing Works 0 0.00 0.00 15,32,590.49
210 0 Electrical Works 0 0.00 0.00 0.00
211 1 Sub-Head I (modular Wiring Items) 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Recessed wirring to light point/ fan point/
exhaust fan point/ call bell point with 1.5
sq.mm FRLSH/LSZH PVC insulated copper
conductor of ISI marked Make-
Finolex/Anchor/Polycab/HAVELLS/RR
KABLE/KEI or equievalant reputed make A
catagory ISI marked as approved with 20
mm dia PVC flexible non metallic conduit
FRLS type ISI marked Make-
AKG/Anchor/Havells or equievalant reputed
make A catagory ISI marked as approved
6A modular type (anti bactorial & flame
retradant type) switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, and ceiling rose ISI marked
Make- Anchor/Havells of modular type G.I
box with metallic cover plate (both side)
(anti bactorial & flame retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved of suitable size, modular box with
1.5 sq. Mm FRLSH PVC insulated single
core multistandard copper conductor as
earth wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FALLOWS ,complete
suitable for IPH standard hospital. All the
switches & sockets should be warrantied for
a replacement period of 2 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
213 3 department for genuinity of product & to
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Group control of point in Recessed wirring
to light point/ fan point/ exhaust fan point/
call bell point with 1.5 sq.mm FRLSH/LSZH
PVC insulated copper conductor of ISI
Make- Finolex/Anchor/Polycab/HAVELLS or
equievalant reputed make A catagory ISI
marked as approved as approved 20 mm
dia PVC flexible non metallic conduit FRLS
type ISI marked Make-AKG/Anchor/Kinjal
or equievalant reputed make A catagory ISI
marked as approved with 6A modular
type((anti bactorial & falme retradant type))
switch ISI marked Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, and ceiling rose ISI marked
Make-Schneider(Zencelo)/legrand( myrius)
/Panasonic (Equievalant model) or
equievalant reputed make & model A
catagory ISI marked as approved of
modular type G.I box with metallic cover
plate (both side)(anti bactorial & falme
retradant type) Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, of suitable size, modular box
with 1.5 sq. Mm FRLS PVC insulated single
core multistandard copper conductor as
earth wire including all accessories and
connection as per direction of Engineer -in -
Charge. CATAGORY AS FOLLOWS ,complete
Supplyingfor IPH standard
,fixing of 6A Plug on the same
board in existing switch board with
complete fitting by 01 no of 6A switch &
socket (modular type)( (anti bactorial &
flame retradant type)) & other required
accessories of ISI marked as approved as
per direction of Engg. -in -Charge. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant reputed
make & model A catagory ISI marked as
approved, complete suitable for IPH
standard hospital.(Maximum 02 nos point in
one circuit).All the switches & sockets
should be warrantied for a replacement
period of 2 years against defects with
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 6A Plug on the separate
board with complete fitting by 01 no of 6A
switch & socket(modular type)( (anti
bactorial & flame retradant type)) with
suitable size modular box & cover(anti
bactorial & falme retradant type) including
supplying of all required accessories of ISI
marked as approved as per direction of
engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision) or equievalant make &
model ISI marked as approved , complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a period of 10 years against
manufacturing defects against which
ncessary test report & Warrnaty certificate
to be submitted to the department for
genuinity of product & to avail free
aftersales service within warranty period for
acceptance of materials.
Supplying,fixing of 1x16A Plug on the
separate board with complete fitting by 01
no of 16A switch & socket(modular
type)((anti bactorial & flame retradant
type)) with suitable size modular box &
cover(anti bactorial & falme retradant type)
including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge.. Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make A catagory ISI marked as approved,
(For equipement power)All the switches &
sockets should be warrantied for a
replacement period of 10 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,fixing of 2x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+2 no 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, (For equipement power)complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of 3x6A+1X1 6A Plug on
the separate board with complete fitting by
01 no of 16A+3 nos 6A switch &
socket(modular type) ( (anti bactorial &
falme retradant type) with suitable size
modular box & metallic cover plate (both
side)(anti bactorial & falme retradant
type)including supplying of all required
accessories of ISI marked as approved as
per direction of engg-in-charge..Make-
Schneider(Zencelo)/legrand( Arteor)
/Panasonic (vision)or equievalant reputed
make & model A catagory ISI marked as
approved, (For equipement power)complete
suitable for IPH standard
hospital.(Maximum 02 nos point in one
circuit).All the switches & sockets should be
warrantied for a replacement period of 10
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free after sales service
within warranty period for acceptance of
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Receass wiring for circuit/submain wiring
with the following mentioned size PVC
FRLSH/LSZH insulated, copper conductor,
single core cable (Finolex/Anchor/Polycab/
HAVELLS/RR KEBLE) or equievalant reputed
make A catagory ISI marked as approved,
in recessed PVC conduit Heavy duty FRLS
222 12 of mentioned size (AKG/Anchor/Kinjal or 0 0.00 0.00 0.00
equievalant ISI marked as approved) as
required as per direction of Engg.-in-
Charge. Ncessary test report & Warrnaty
certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
2 nos single core 1.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
continuty conductor. In 20 mm dia non
metallic heavy duty flexible conduit (LDB to
LSB/LIGHT CKT)(2X1.5+1X1.5)
2 nos single core 2.5 sq. mm copper wire
for phase and neutral and 01 no of single
core 1.5 sq. mm copper wire for earth
224 14 continuty conductor in 20 mm dia non Mtr 300.00 171.10 51,330.00
metallic heavy duty flexible conduit.(BDB
to LSB/LIGHT CKT/5A PLUG/INVERTER
POINT TO EACH QTR) (2X2.5+1X1.5)
4 nos single core 2.5 sq. mm copper wire
for phase and neutral and 02 nos of single
core 2.5 sq. mm copper wire for earth
continuty conductor .in 25 mm dia non
metallic heavy duty flexible conduit(LDB to
LSB/5A SOCKET) (4X2.5+2X2.5)
2 nos single core 4 sq. mm copper wire for
phase and neutral and 01 no of single core
1.5 sq. mm copper wire for earth continuty
conductor in 20 mm dia non metallic heavy
duty flexible conduit .(PDB to PSB/ GAYSER
POINT/AC POINT/ROOM LIGHT CONTROL
TO CORRIDOOR POINT/DG PANEL
ESSENTIAL LOAD) (2X4+1X1.5)
4 nos single core 4 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
227 17 conductor in 32 mm dia non metallic heavy Mtr 200.00 289.10 57,820.00
duty flexible conduit.(PDB to PSB/GAYSER.
POINT/AC POINT/DG PANEL ACCL TO EACH
QTR ESSENTIAL LOAD) (4X4+2X2.5)
2 nos single core 6 sq. mm copper wire for
phase and neutral and 01 no of single core
2.5 sq. mm copper wire for earth continuty
conductor in 25 mm dia non metallic heavy
duty flexible conduit .(LFDB TO LBDB)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
4 nos single core 6 sq. mm copper wire for
phase and neutral and 02 nos of single core
2.5 sq. mm copper wire for earth continuty
conductor in 32 mm dia non metallic
heavy duty flexible conduit.(LFDB TO
LBDB/power unit/point) (4X6+2X2.5)
4 nos single core 10 sq. mm copper wire for
phase and neutral and 02 nos of single core
4 sq. mm copper wire for earth continuty
conductorin 32 mm dia non metallic heavy
duty flexible conduit .(LFDB TO FLOOR
PANEL TO TPN BDB light ) (4X10+2X4)
4 nos single core 16 sq. mm copper wire for
phase and neutral and 02 nos of single core
10 sq. mm copper wire for earth continuty
conductor in 40 mm dia non metallic heavy
duty flexible conduit.(FLOOR PANEL TO TPN
BDB power) (4X16+2X10)
Supplying and fixing 20 amps, 240 volts,
SPN, industrial type socket outlet, with 2
pole and earth metal enclosed plug top
along with 32 amps. C-series, SP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
as required as per direction of Engg.-in-
Charge.. . Make-
Legrand/Schneider/Siemens/panasonic or
equievalant reputed make & model A
catagory ISI marked as approved,All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing 32 amps, 415 volts,
TPN, industrial type socket outlet, with 4
pole and earth metal enclosed plug top
along with 32 amps. C-series, TP MCB, in
sheet steel enclosure, on surface or in
recess, with chained metal cover for the
socket outlet, and complete with
connections, testing and commissioning etc.
as required as per direction of Engg.-in-
Charge.. . Equievalant higher model of
Legrand/Schneider/Siemens/panasonic
equievalant reputed make & model A
catagory ISI marked as approved.All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing following size/
modules, GI box along with modular base &
metallic cover plate (both side)(anti
bactorial type) plate for modular switches in
recess etc as required as per direction of
Engg.-in-Charge. MAKE-
Legrand/Siemens/Anchor/Panasonic/
Schneider or equievalant reputed make &
model A catagory ISI marked as approved
.All the Components should be warrantied
for a replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Supplying and fixing of following sizes of
medium class PVC FRLS conduit ISI marked
along with accessories in surface/recess
including cutting the wall and making good
238 28 the same in case of recessed conduit as 0 0.00 0.00 0.00
required as per direction of Engg.-in-Charge
.MAKE KINJAL/ AKG/Anchor or equievalant
reputed make A catagory ISI marked as
Supply and fixing modular type indicator on
the existing switch box/cover . Equievalant
higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
as required as per direction of Engg.-in-
241 31 Charge.All the Components should be Nos 10.00 126.26 1,262.60
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying and installation of AC starter
Modular type, Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
coil voltage-415 Volt A.C. & O/L range of 9-
14A range on mod Box of suitable size
including modular coveras required as per
direction of Engg.-in-Charge .All the
Components should be warrantied for a
replacement period of 5 years against
defects with ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing CALL bell (Ding dong
type) /Buzzer on the existing switch
box/cover. Equievalant higher model of
Schneider/Hager/Siemens/Anchor/Panasoni
c make or equievalant reputed make &
model A catagory ISI marked as approved
.as required as per direction of Engg.-in-
243 33 Charge.All the Components should be Nos 1.00 241.90 241.90
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
S/F of Bakelite angle holder/batten holder
(make-Anchor/Havells/Panasonic or
equievalant reputed make A catagory ISI
marked as approved )of ISI marked
conforming to IS-1258/1987 in place of
ceiling rose as per direction of Engg.-in-
Charge .All the Components should be
warrantied for a replacement period of 5
years against defects with ncessary test
report & Warrnaty certificate to be
submitted to the department for genuinity
of product & to avail free aftersales service
within warranty period for acceptance of
Supplying,fixing of Blanking plate(modular
type)( (anti bactorial & flame retradant
type)) in existing switch box(anti bactorial
& flame retradant type) including supplying
of all required accessories of ISI marked
as approved as per direction of engg-in-
charge.. Make-Schneider(Zencelo)/legrand(
Arteor) /Panasonic (vision), complete
suitable for IPH standard hospital.It should
be warrantied for a period of 10 years
against manufacturing defects against
which ncessary test report & Warrnaty
certificate to be submitted to the
department for genuinity of product & to
avail free aftersales service within warranty
period for acceptance of materials.
246 36 Sub-Head II (Light fitting Fixture & Fan) 0 0.00 0.00 0.00
Supplying, installation, of exhaust fan of
heavy duty 300 mm sweep (Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Usha
247 37 or equievalant reputed make & model A Nos 4.00 3683.96 14,735.84
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, installation, of exhaust fan of
heavy duty 380 mm sweep 1400 rpm with
louvers Make-Equievalant higher model with
5 star rated of
Havells/almonard/Anchor/Panasonic/Usha
248 38 or equievalant reputed make & model A Nos 6.00 4334.14 26,004.84
catagory ISI marked as approved ) of
exhaust fan in the existing wall, including
fixing & conntection .as required as per
direction of Engg.-in-Charge. Replacement
Warranty will be 5 years.
Supplying, installation, testing and
commssioning of 1400 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Usha
or equievalant reputed make & model A
249 39 catagory ISI marked as approved ) Nos 8.00 2607.80 20,862.40
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required.(With fan Regulator)
as required as per direction of Engg.-in-
Charge.Replacement Warranty will be 5
Supplying, installation, testing and
commssioning of 1200 mm sweep
white/milky colour ceiling fan Make-
Equievalant higher model with 5 star rated
Havells/almonard/Anchor/Panasonic/Ushaor
equievalant reputed make & model A
catagory ISI marked as approved )
including wiring the down rod of standard
length (upto 30 cm) with 1.5 sq mm PVC
insulated, copper conductor, single core
cable etc. as required as per direction of
Engg.-in-Charge,Replacement Warranty will
be 5 years.. .(With fan Regulator)
Supplying and fixing of Energy
efficient Recess mounted LED luminaire
made up of CRCA powder coated sheet
steel housing of 595 X 595 mm x 70 mm
size with of not more than 25W and system
lumens output not less than 3250 lumens
(130 lm/ wt) with diffusers for better light
transmission and pure effect with High
luminous flux LEDs for better light output,
CRI not less than 80, CCT of 5700-6500
degree K, THD less than 10%,internal
surge protection of 3 KV, complete with
251 41 Non integrated isolated electronic driver No 6.00 3158.86 18,953.16
(protects the output /secondary side from
any disturbance on the input / primary side
ensuring safe operation)and all other
accessories suitable for operation on140-
270 V, 50 Hz ,L70 @50,000 burning hrs (5
years warranty)supply .as required as per
direction of Engg.-in-Charge (Make:
Panasonic/LT/Trilux /Philips/Wipro or
equievalant reputed make & model A
catagory ISI marked as approved.) . The
luminaire must be Replacement Warranty
will be 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing of Energy
efficient surface mounted square shape 20
W LED luminaire of dimension of 225x 225
x 35 mm consists of white powder coated ,
die-cast Alluminium housing with high
quality frosted diffuser for glare-free
uniform lighting distribution with wattage
not more than 20 watt and lumen output of
1500 lumens, , CRI not less than 80,CCT of
6000 degree K,THD less than 10%, with
electronic driver, internal surge protection
of 2.5 KV , L70 B50: 30000 hrs (2 yrs
warranty) and all other accessories suitable
for operation on 220 V to 240 V supply as
required as per direction of Engg.-in-
Charge. ( Make : Panasonic
/Trilux/Osram/PHILIPS/Wipro or equievalant
reputed make & model A catagory ISI
marked as approved).The luminaire should
be Replacement Warranty will be 5 years
Supplying and fixing of Energy
efficient recess mounted LED luminaire with
white powder coated ,pressure die-cast Al
housing ,with high transmititivity,non-
yellowing PMMA diffuser, with wattage not
more than 20 watt and lumen output not
less than 2600 Lumen ( 130 lumens/watt )
of size 595 x595 x 70 mm , ,CRI not less
than 80,CCT of 5700-6500 degree K,THD
less than 10%, with Non integrated isolated
driver (protects the output /secondary side
from any disturbance on the input / primary
side ensuring safe operation), all other
accessories , life : 50,000 burning hours (5
years warranty) , Internal surge protection
of 3 KV suitable for operation on 230 V, 50
Hz supply as required as per direction of
Engg.-in-Charge. ( Make : Panasonic / LT
/Wipro/PHILIPS or equievalant reputed
make & model A catagory ISI marked as
approved.) The luminaire should be
Replacement Warranty will be 5 years.
SITC of energy efficient LED tube light
fittings with decorative alluminium batten
and LED tube light having power rating not
more than 20 watt and lumen output not
less than 2200 lumen complete with
electronic driver and all other accessories
254 44 with diffuser having 5 years warranty i/c Nos 60.00 940.46 56,427.60
connection etc as required as per direction
of Engg.-in-Charge. (Similar to
Panasonic/PHILIPS/LT/wipro or equievalant
reputed make & model A catagory ISI
marked as approved.). The luminaire should
be Replacement Warranty will be 5 years .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
SITC of Sleek LED 10 watt mirror light
fitting with extruded polycarbonate
housing,High optically efficient
diffuser,above wash basin complete with all
accessoriesetc. directly on wall, including
connection with 1.5 sq. mm FRLS PVC
255 45 insulated, copper conductor, single core Nos 6.00 863.76 5,182.56
cable and earthing etc. as required as per
direction of Engg.-in-Charge.
( Make : WIPRO / PHILIPS/Panasonic or
equievalant reputed make & model A
catagory ISI marked as approved. )The
luminaire should be Replacement Warranty
will be 5 years
Supplying and fixing extra conduit down rod
of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as requiredas
required as per direction of Engg.-in-Charge
(Note : More than 5 cm length shall be
rounded to the nearest 10 cm and 5 cm or
less shall be ignored)of ISI mark as
257 47 BDBS,DB,AC DB,FLOOR PANELS,MCBS 0 0.00 0.00 0.00
Supplying and fixing of following mentioned
way, three pole/single pole and neutral,
sheet steel,double door MCB distribution
board, 415 volts/240 volts shall be as per
IEC 61439-3,integrated door earthing
system offering additional safety to the
user,High quality polyurethane Gasket,the
box and cover shall be fabricated to
withstand IK09,the DB should be properly
pre-treated with 7 tank process and duly
powder coated, phosphatized with powder
coated finish, on surface/recess, complete
with terminal blocks,with suitable size FR
PVC insulated copper conducter up to
terminal blocks, tinned copper busbar,
neutral busbar, earth bar, din bar. Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved. as per
direction of Engg.-in-Charge. The
Distribution boards should be Replacement
Warranty will be 5 years
4 Way(8+12) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
259 49 with neutral Bus bar, Earth Bar & Cable ties Nos 2.00 2558.24 5,116.48
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Warranty on DB is 2 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply and fixing of 12 way DD single pole
and neutral sheet steel MCB distribution
board 250V on surface/recess complete with
tinned copper bus bar, neutral bus bar,
earth bar, din bar, detachable gland plate,
260 50 interconnections, phosphatized and powder Nos 2.00 2249.08 4,498.16
painted including earthing etc. as required
(but with out MCB/ RCCB/ Isolator) (ALL
LIGHT WITH CORRIDOOR/COMMON
AREA,EM LIGHT,UPS LOAD, EM LOAD LIGHT
LOAD,POWER LOAD )
2+4 way MCB Enclosure DB (GLAZED
261 51 door)(only each EM. CONNECTION UPS Nos 2.00 1926.94 3,853.88
8 Way(8+24) Way TPN MCB DD DB
Horizontal Type as per IEC 61439-3 suitable
for Flush mounting and Surface mounting
with 100A Copper Bus Bar for each phase,
with neutral Bus bar, Earth Bar & Cable ties
for cable management, prefitted masking
sheet, IP43-IK09 with metal door(FOR
LIGHT,POWER INDOOR,3-PH,POWER LOAD)
Supplying and fixing 20 amps rating, 240
volts, C series, Double poles MCB of Make-
LEGRAND-Ekinox3 DB/ Siemens-Betaguard/
Schneider- Acti 9/L&T (Equievalant
model)/Panasonic(Equivalant model)
/ABB(Equivalant model) or equievalant
reputed make & model A catagory ISI
marked as approved in the existing MCB DB
complete with connections as per direction
of Engg.-in-Charge. The MCB should be
Replacement Warranty will be 5 years .MCB
should have the fault indication system in
different colour for ON, OFF & TRIP
condition or Mid trip position for Trip
conditions for easier identification of
fault.Warranty on MCB is 5 years.
Supplying and fixing 6 amps to 32 amps
rating, 240 volts, C series, single poles MCB
of Make-LEGRAND-Ekinox3 DB/ Siemens-
Betaguard/ Schneider- Acti 9/L&T
(Equievalant model)/Panasonic(Equivalant
model) /ABB(Equivalant model) or
equievalant reputed make & model A
catagory ISI marked as approved. the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
MCB should be Replacement Warranty will
be 5 years.MCB should have the fault
indication system in different colour for ON,
OFF & TRIP condition or Mid trip position for
Trip conditions for easier identification of
fault.Warranty on MCB is 5 years.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying and fixing 40 Amps rating, TPN,
415 volts, RCCB,300mA .Make-Equievalant
higher model of
Legrand/Snheider/Siemens / L&T/Panasonic
/ABB or equievalant reputed make & model
A catagory ISI marked as approved in the
existing MCB DB complete with connections,
testing and commissioning etc. as required
as per direction of Engg.-in-Charge. .(4W
TPN BDB IC)AC ODU CONTROLLER). The
RCCB should be Replacement Warranty will
Supplying and fixing 25Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABBor equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 40Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
approved in the existing MCB DB in the
existing MCB DB complete with connections
as per direction of Engg.-in-Charge. The
RCCB should be Replacement Warranty will
Supplying and fixing 63Amps DP 240 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant
reputed make & model A catagory ISI
marked as approved in the existing MCB DB
in the existing MCB DB complete with
connections as per direction of Engg.-in-
Charge.The RCCB should be Replacement
Warranty will be 5 years
Supplying and fixing 63Amps TPN 415 volts,
RCCB,300mA Make-Equievalant higher
model of Legrand/Snheider/Siemens /
L&T/Panasonic /ABB or equievalant reputed
make & model A catagory ISI marked as
269 59 approved in the existing MCB DB in the Nos 2.00 3116.38 6,232.76
existing MCB DB complete with connections
as per direction of Engg.-in-Charge.(for
power BDB & AC ODU, 8 way TPN BDB
IC).The RCCB should be Replacement
Warranty will be 5 years
270 60 (Earthing) INSTALLATION 0 0.00 0.00 0.00
S/IT/C Of Earthing with copper earth plate
600 mm x 600mm x 6 mm thick ISI marked
including accessories and providing
masonary with cover plate having loccking
271 61 arrangement and watering pipe etc (WITH Nos 2.00 16398.46 32,796.92
charcoal and salt) as required as per
direction of Engg.-in-Charge. The entire
earthing system should be Replacement
Warranty will be 5 years
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 4 mm dia copper wire
on surface or in recess for loop earthing as
required.as per direction of Engg.-in-
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
Supplying and making brick massonary
pedastal with extra super structure
including cement plastering etc as required
as per direction of Engg.-in-Charge.
CABLING AND END TERMINATION MAIN
Supplying of one number PVC insulated
armoured and PVC sheathed XLPE property
AL. conductor power cable of 1.1 KV grade
POLYCAB/HAVELLS/Finolex or equievalant
reputed make ISI marked as approved of
276 66 following size cables as per direction of 0 0.00 0.00 0.00
Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
278 68 4 core x 4 sq mm (for small power) Mtr 19.00 103.69 1,970.05
3.5core x 95 sq mm ( FOR main panel light
& power supply)
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
exceeding 25 SQ. MM direct in ground in
282 72 the trench in one horizental formation Mtr 12.00 153.40 1,840.80
including excavation ,sand coushing
protection covering and refilling the trench
etc as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
25 SQ. MM but not exceeding 120 SQ. MM
direct in ground in the trench in one
horizental formation including excavation
,sand coushing protection covering and
refilling the trench etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
284 74 exceeding 25 SQ. MM direct in ground in Mtr 16.00 49.56 792.96
the EXISTING PIPE etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
285 75 25 SQ. MM but not exceeding 400 SQ. MM Mtr 16.00 68.44 1,095.04
direct in ground in the EXISTING PIPE etc
as required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
286 76 exceeding 25 SQ. MM in open duct etc as Mtr 16.00 54.28 868.48
required as per direction of Engg.-in -
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size exceeding
287 77 25 SQ. MM in open duct 400 SQ. MM direct Mtr 20.00 54.28 1,085.60
in ground in the EXISTING PIPE etc as
required as per direction of Engg.-in -
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
288 78 exceeding 25 SQ. MM in surface with Mtr 26.00 95.58 2,485.08
shaddle and screw etc as required as per
direction of Engg.-in -charge.
Laying of PVC Insulated PVC Seated /XLPE
power cable of 1.1 kv grade size not
289 79 exceeding 400 SQ. MM From 120 SQ. MM Mtr 8.00 154.58 1,236.64
in surface with shaddle and screw etc as
required as per direction of Engg.-in -
Supplying and making end termination with
brass compression gland and aluminium
lugs for following mentioned size cable.as
per direction of Engg.-in-Charge.
Providing,fixing and laying of following dia
G.I. pipe (medium class) in ground
294 84 complete with G.I fitting incl. trenching(75 0 0.00 0.00 0.00
mm depth)and refilling as per direction of
Engg.-in-Charge.
Providing,fixing and laying of fallowing dia
HDPE pipe (medium class) in ground
296 86 complete with fitting incl. trenching(75 mm 0 0.00 0.00 0.00
depth)and refilling as per direction of Engg.-
298 88 MAIN CONTROL PANEL AT GF 0 0.00 0.00 0.00
S/I/T&Commissioning of LT indoor floor
mounted cubical type electrical main panel
(for both light and power circuit) made out
by 2mm CRCA steel sheet duly derusted &
painted by siemens gray powder cote paint
299 89 is designed as G.A drawing as per direction Set 1.00 259553.98 2,59,553.98
of Engg.-in-Charge.Warrentee period of
replacement of panel & accessories must
be 5 years & compelete test certificate must
be submitted along with panel board
including component list.
In commer-1-01 number of 160A 4P
Icu=100%Ics,0, LSIG MCCB with micro
processor based release Electrical locking
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(HVAC & MEDICAL
EQUIPEMENT)(200 KVA TRANSFORMER)
In commer-2-01 number of 160A 4P
Icu=100%Ics, 0 LSIG MCCB with micro
processor based release with adjustable
overload from 36%-100% & Electrical
301 91 locking for normal & DG (make- 0 0.00 0.00 0.00
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked) along with 01 no of 160A 4P
onload changeover switch (125 KVA DG 01
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Busbar-1&2 04 numbers of 300Amps
Aluminium busbar with 1A/SQ.MM current
302 92 carring capacity. busbar duly sleeved by 0 0.00 0.00 0.00
color coated PVC sleeve & supported by
suitable size DMC insulator. (for outgoing)
Out going- 12 numbers of 63A 4P MCB
303 93 (make- Legrand or equivalent reputed 0 0.00 0.00 0.00
make ISI marked)BDB P/AC,Rawpower)
Out going- 1 numbers of 125A 4P
Icu=50%Ics, LSIG MCCB withTMR based
304 94 release with adjustable overload (make- 0 0.00 0.00 0.00
LEGRAND/Schneider/ABB/Siemens, ISI
marked)(RAW POWER)
Out going- 12 numbers of 32A 4P MCB
ABB/Siemens/SCHNEIDER/L&T/Legrand, ISI
marked)(LIGHT SUPPLY)
Instrument- (i) 03 numbers phase
306 96 indicating lamp with toggle switch & HRC 0 0.00 0.00 0.00
(ii) 02 set of digital type multifunction
meter with CT for
voltage,current,frequency,PF,THD indication
with RS 485 COMPACTIVITY FOR bms data.
(iii) 4 nos of 65kA SP VSD WITH 32A SP
CABLE TRAY /RACE WAY FOR
DISTRIBUTION OF POWER
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 200mm(W), of Legrand -
Cablofil make or equievalant reputed make
& model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as
per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
HOT DIPP GALVANIZED(GC) AS PER EN-ISO-
1461 , CARBON STEEL WIRE MESH CABLE
TRAYS with internal dimensions of size
54mm(H) x 300mm(W), of Legrand -
Cablofil make or equievalant reputed make
& model A catogory, ISI marked as
approved .The Load bearing capacity of the
Cable Trays should be minimum of
104.8Kg/meter at the span of 1.5Meter as
per UL specifications.(With all
accessories,bend,cover,supporter)WITH
REQUIRED SIZED JUNCTION BOX ,COVER
CONNECTOR as required as per direction of
Engg.-in-Charge. Warrentee period oftray
must be 5 years & compelete test certificate
must be submitted .
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, Erection, Fixing, connection &
testing of LED BOUNDRY WALL Light of
elegant look Panasonic/philips/wiproor
equievalant reputed make & model A
catogory, ISI marked as approved 35 W LED
street light having die cast aluminium
housing with toughened glass having
lumen efficacy of 110 lm/w or more (As per
LM 79 report of third party NABL lab) ,IP 65
protection or more , LED street light model
will be vide Panasonic / Philips/LT/WIPRO
make or equievalant reputed make A
catagory ISI marked as approved having
warrantied for a period of 5 years . The
luminaire should be supplied along with
bracket maintenance free for inspection as
required as per direction of Engg.-in-
Supply of materials and installation of pipe
earth electrode made out of 50mm dia class
B G.I. pipe of 3.0 metre long with
arrangements for fitting/ termination of
G.I. flat / wire with G. I. nut bolts &
washers including cost of burnt wood
charcoal, salt, foreign soil, water pouring
arrangements, brick masonary enclosure on
top with removable RCC cover complete
with labour for excavation of pit in all kinds
of soil & rock as required and as per
direction of Engineer-in-charge.The entire
earthing system should be Replacement
Warranty will be 5 years
Providing and fixing 4 mm dia copper wire
on surface or in recess for loop earthing as
required as per direction of Engg.-in-
Providing and fixing 25mm x 5 mm copper
strip on surface or in recess for connections
etc. as required as per direction of Engg.-in-
S/I/T&Commissioning of LT OUT DOOR
FLOOR mounted cubical type MCB
ENCLOSURE made out by 2mm CRCA steel
sheet duly derusted & pented by simens
gray powder cote paint is designed as G.A
drawing. (FOR USE) with 20A TPN MCB 01
317 107 NOLegrand/Schneider/L&T/ABB or Set 1.00 2411.92 2,411.92
equievalant make & model as per direction
of Engg.-in-Charge. Ncessary test report &
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period 2 years of acceptance of materials
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying,laying of 3cx2.5 sq.mm copper
flexible cable with insulated cover of
reputed make,ISI marked with all other
concerned materials as per direction of
318 108 Engg.-in-Charge. Ncessary test report & mtrs 55.00 125.08 6,879.40
Warrnaty certificate to be submitted to the
department for genuinity of product & to
avail free after sales service within warranty
period for acceptance of materials
Supply,installation, testing and
320 110 commissioning of 4 P&T & 14 Extensions Set 1.00 15930.00 15,930.00
Hybrid EPABX System
Supply,installation, testing and
commissioning of RJ11 Modular Complete in
concealed manner including termination of
Supply & Laying of 2 Core 0.5mm telephone
322 112 cable using Rigid PVC Pipe in concealed Rmt 56.00 76.70 4,295.20
manner per running metre of cable laid.
Supply,installation, testing and
323 113 commissioning of Electronic Push Button Nos 2.00 826.00 1,652.00
Telephone with Caller ID
Supply,installation, testing and
commissioning of RJ45 Modular Complete in
concealed manner including termination of
Supply & Laying of Cat 6 cable using Rigid
326 116 PVC Pipe in concealed manner per running Rmt 211.00 67.26 14,191.86
metre of cable laid.
Supply,installation, testing and
commissioning of Patch Panel, 6U Rack,
Cable Manager, Cooling Fan x 2 Nos.,
Earthing Kit, Power Manager
Supply,installation, testing and
commissionining of 1 Mtr Patch Cord
Supply,installation, testing and
commissionining of 3 Mtr Patch Cord
Supply,installation, testing and
331 121 commissioning of 10 Channel DVR with 2 Set 1.00 28910.00 28,910.00
Supply,installation, testing and
332 122 commissioning of 4 MP Dome / Bullet Nos 4.00 18644.00 74,576.00
Camera with 25 Mtrs IR Range
Supply & Laying of RG59+ 3 Core cable
333 123 using Rigid PVC Pipe in concealed manner Rmt 100.00 128.62 12,862.00
per running metre of cable laid.
Supply,installation, testing and
commissioning of BNC & DC Connectors
Supply,installation, testing and
335 125 commissionining of 4 TB CCTV Surveillance Nos 1.00 15104.00 15,104.00
Supply,installation, testing and
commissioning of Bird Canopy
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
337 0 Sub-Total of Electrical Works 0 0.00 0.00 15,96,527.35
338 0 Firefighting Works 0 0.00 0.00 0.00
Portable Fire Extinguisher System
Supplying, installation, testing and
commissioning of CO2 type Fire
Extinguisher 4.5 kg capacity confirming to
IS: 2878 made from ISI marked seamless
cylinder confirming to IS: 7285, fitted with
339 1 ISI marked controlled valve confirming to Nos 8.00 14309.86 1,14,478.88
IS: 3224, high pressure 1mtr discharge
hose & horn complete with initial gas
charged with carrying handle & wall
mounting bracket as per direction of
Engineer-in-charge. (Make:CS-
FIRE/SUNMAX/CANEXE or equievalant )
Supplying, installation, testing and
commissioning of Mechanical Foam type 9
litre capacity Fire Extinguisher, ISI marked,
IS: 10204, containing 540 ml AFFF liquid
ISI marked, IS: 4989 Part II and a
polyurethane coated CO2 Gas Cartridge, ISI
marked, IS: 4947 complete with gunmetal
union cap, nylon hose with plastic foam
making branch and wall mounting bracket
as per direction of Engineer-in-charge.
341 0 Sub-Total of Firefighting Works 0 0.00 0.00 1,26,488.92
342 Grand Total 2,35,27,396.29
342 Grand Total 2,35,27,396.29
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ SAM 010 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Sambalpur CSSD.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .