WBPWD/EE/KNHED/NIQ-68/21-22

Amount

Supply of 8.5 TR Ductable type Split Air Conditioner of rated cooling capacity of 102000 BTU/hr. with 2Nos. Scroll compressor, 1 no. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-400V-3ph-50Hz. Air-flow/per IDU:- 3400CFM. Refrigerant R410A ( Make: Hitachi/Daikin/O-General) incl. sealing of the holes in wall created during the copper pipe connection between IDU & ODU by proper sand-- cement plastering and painting (both inside and outside) to match up with the original finish mending good the damages.

Erection ,testing,Commissioning Charges for 8.5 TR Air Conditioner

Supply & Charging Refrigerant gas for pipe lining

REFRIGERANT PIPING Supply and installation of hard copper refrigerant piping, complete with fittings, elbows, supporting arrangements.(Make : Royku) a) Liquid line(1 1/8")

b) Suction line (5/8')

Suction Pipe Line Insulation Supply & fixing of Nitrile Rubber tube insulation of 19 mm thick on copper pipe. Make Armacell / K Flex/ A Flex a) Liquid line(1 1/8")

b) Suction line (5/8')

AIR DISTRIBUTION SYSTEM Design, supply, fabrication and erection class VIII grade (120 GSM) GI sheet supply air duct along with necessary supports, flanges etc etc as required and as per IS 655 and IS 277 standards of followings gauges (Make SAIL/ TATA) a) 24 SWG thick

b) 22 SWG thick

Control copper Cabling from Condensing Unit to control panel (Make: polycab/finolex) a) 4 core 1.5 sq.mm communication cable

b) 3 core 2.5 sq.mm communication cable

AIR TERMINAL Supply ,fixing , testing & commisoning of extruded Aluminium square Diffusers/Grille with VCD for supply Air ( Make systemair/ Dynacraft/ Premire/ Caryaire/ airmaster)

Supply ,fixing , testing & commisoning extruded Aluminium Square Diffuser / Grille without VCD for return Air ( Make systemair/ Dynacraft/ Premire/ Caryaire/ airmaster)

Supply , installation , testing and commissioning of opposed type GI mannual duct dampers ( Make systemair/ Dynacraft/ Premire/ Caryaire/ airmaster)

CONDENSATE DRAIN PIPING Drain Water piping work out of PVC / HDPE hard pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors. (Mk. Ori Plast / Supreme) a) 25 mm Dia

b) 32 mm Dia

DUCT THERMAL INSULATION Supplying and fixing of 19 mm thick duly laminated aluminium foil of mat finish closed nitrile rubber (Class 0) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile tape insulation complete (make Armacell / K Flex/ Supreme / A Flex)

10 mm thik Acoustic insulation of duct with fire retardant, closed cell, tri-dimentional chemically crosslinked polyethylene foam insulation conforming to Class 0 fire propagation rating and having minimum density of 32 kg/cu.m. Insulation material shall be supplied with factory applied pressure sensitive adhesive and protective cover. (Make - Armacell / K Flex / Supreme)

MISCLLENEOUS Supplying, fabrication & fixing M.S U-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) of 1m length for making platform for installation of outdoor unit of 8.5 TR ductable split AC 2Nos. Scroll compressorincl. drilling 2 nos holes in each channel including cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with horizontal angle of 25 mm x 25 mm x 6 mm including supporting angle 50mm X 50mm X 6mm in each platfrom. Area of the plat from is 2 mt X 1.2mt or as per Machine Configuration & load with 3(three) side baricade for adequate service of ODUs as per direction of EIC.

Charges for drop ceiling to cover the Indoor Units and other duct made of Aluminium Composite Panel Board

Charges for Trap Door made of Aluminium Composite Panel Board

Supply and fixing of Al powder coated continuous Grill

(Rate should be quotated including all taxes and duties)

S.R. REFRIGERATION AND APPLIANCES

SOUMYA ENTERPRISE