Erection of new street light poles st Katol M.C.(Third Call)

Amount

Street light arrangement, supply and erection of RSJ pole, Labour charges & other related materials ( as per MSEDCL estimates )

PSC Pole 8 mtr Long

8 Mtr Long RSJ Pole size 5 X 3

9 Mtr Long RSJ Pole size 5 X 3

9 Mtr Long RSJ Pole size 7 X 3.5

AAC ANT 50 sq mm for phase conductor

AAC GANT 25 sq mm for neutral

LT Vertical 3ph 4w/5w

LT Gaurding Cross Arms

LT Stay sets

Stay Wire 7/8 SWG

Stay insulator

LT Shackle insulator

LT Shackle Hardware

Aluminium Bobin

M.S. “D” Clamp

LT Earthing Sets

GI Wire 8 SWG

GI Wire 10 SWG

L.T. Stay Clamp Top/Bottem A/B Type

M.S.Angle 50x50x6mm

LT Guarding Cross Arm Clamp

Aluminium Paint

Red Oxide Paint

Others/ M.S. Nut Bolts/ Washers etc

MS Angle 50*50*6 mm

Ms Flat 50 MM X 10MM

Ms Flat 50 MM X 6MM

LT Aerial Bunched Cable 3 X 50 sq mm)

AB Suspension clamp assembly

AB Dead End clamp assembly

Concreting For Base Pads Stays & Angle Location

Labour charges for LT line erection work on the basis of material expences rate

Street Light PSC Pole Shifting Labour Charge

Street Light RSJ Pole Shifting Labour Charge

Street Light Pole Clamp With Nut Bolt/Wasshers with Fabrication

1’’ Ench x 1-5 feet Long GI Pipe Brackets Single Bend with fabrication

1-5’’ Ench x 1-5 feet Long GI Pipe Brackets Single Bend with Fabrication

1.25” Ench x 1-5 feet Long GI Pipe Brackets Single Bend with Fabrication

Street light arrangement, supply and erection of pole & other related materials ( as per PWD CSR rate & specification 2018-19 )

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/insidepole/Bus bars or any other places. as per specification No: WGMA/BW (1-3-3)

Supplying & erecting mains with 2x4 sq.mm F.R copper PVCinsulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WGMA/BW (1-3-5)

Supplying and erecting mains with ISI mark WP 2 x 2.5 sq.mm. 1100 V grade aluminium PVC insulated and PVCsheathed wires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. (1-4-1)

Supplying and erecting mains with ISI mark WP 2 x 4 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected withrequired size of porcelain reel insulators and 16 SWG G.I. binding wire. (1-4-2)

Supplying and erecting mains with ISI mark WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathedwires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire. (1-4-3)

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. (2-5-2)

Supplying and erecting LED street light fitting suitable above 26W to 36W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/FLS2. (2-5-3)

Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No . FGODF/FLS2. (2-5-4)

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/FLS-2. (2-5-5)

Supplying and erecting LED street light fitting 100W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2. (2-5-8)

Supplying and erecting LED Flood light fitting of 50W, including lamp, with PF > 0.95,class IP 65 and above class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FGODF/FLS-2 (2-5-13)

Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2(2-5-14)

Supplying and erecting LED Flood light fitting of 90-100W, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 (2-5-15)

Supplying and erecting LED Flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 (2-5-16)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/MCB (5-3-3)

Supplying, erecting & marking SPMCB 40A to 63A C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB (5-3-4)

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.. (6-1-1)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (6-1-19)

Supplying, erecting & terminating XLPE armoured cable 2 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-4)

Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-5)

Supplying, erecting & terminating XLPE armoured cable 2 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-6)

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-8)

Supplying, erecting & terminating XLPE armoured cable 3 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-9)

Supplying, erecting & terminating XLPE armoured cable 3 core 10sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-10)

Supplying, erecting & terminating XLPE armoured cable 3 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-11)

Supplying, erecting & terminating XLPE armoured cable 3 core 25sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-12)

Supplying, erecting & terminating XLPE armoured cable 3 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL (7-1-14)

Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-16)

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm.(12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (7-1-17)

Supplying & laying (including excavation) 25 cm Dia half round RCC Hume pipe of standard thickness at required depth up to 90cms. below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet). (7-6-8)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (7-6-9)

Supplying and erecting 9m (clear height) fixed type High Mast (Top-100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation as per specification no. OH-PL/OPL(excluding luminaries). (8-3-8)

Supplying and erecting 12.5m (clear height) Fixed type High Mast (Top-110mm, Bottom- 242 mm) with hexagonal/round bracket and foundation bolts suitable for max. 6 nos floodlight fixtures on provided foundation as per specification no.OH-PL/OPL(excluding luminaries). (8-3-9)

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F on provided foundation as per specification no.OHPL/OPL. (8-3-14)

Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/OPL (8-3-15)

Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/OPL (8-3-16)

Providing & erecting 10 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 175 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/OPL (8-3-17)

Providing & erecting 11 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 210 mm A/F, top 90 mm A/F on provided foundation as per specification no. OHPL/OPL (8-3-18)

Providing & erecting 12 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 240 mm A/F, top 90 mm A/F on provided foundation as per specification no. OHPL/OPL (8-3-19)

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/PBKT (8-3-30)

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OHPL/PBKT (8-3-31)

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP (9-1-4)

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR (16-1-1)

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXN-CTR (16-1-3)

Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete. (16-1-5)

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). (16-3-7)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete(for 6m to 8m high octagonal /conical GI pole). (16-3-9)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete(for 9m & 10m high octagonal/conical GI pole). (16-3-10)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 11m & 12.5 m high octagonal/conical GI pole) (16-3-11)

Supplying and erecting ISI mark GI pipe 25 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP. (15-5-3)

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP. (16-5-5)

Supplying and erecting ISI mark GI pipe 50 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP. (16-5-6)

Supplying and erecting mains with ISI mark WP 2 x 10 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathedwires on G.I. bearer wire No. 8 SWG complete erected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.

Supplying 100 Amp. 433 V Brass Point Kit kat Fuse (MSDCL Type)

Supplying 63 Amp. 433 V Brass Point Kit kat Fuse (MSDCL Type)

Maa Bamleshwari Enterprises