REPAIR/ RENEWAL/ REPLACEMENT OF WATER SUPPLY MOTOR PUMP SET AND CONNECTED SERVICES IN THE AOR OF AGE E/M UNDER GE (A) SURATGARH AT SURATGARH MIL STN.

Amount

Notes:- (i) 100 percent non perishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) Material obtained from demolition/dismantled and the serviceable material (other than reused in the work) shall be the property of the Govt and shall be removed and deposited in the MES Store Yard without any extra cost to Govt. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated Group-I category makes as approved by HQ CE SWC Jaipur / HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) Suffficient tradesman, Labours needs should be employed by the bidder on daily basis and as required by Engineer-in-Charge. (ix) Contractor shall provide Main items, fixtures, base materials, putty, paint & primer of same make as per manufacturer instruction. (x) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.

M&L for repair to centrifugal pump capacity 150 / 125 HP by disconnecting from foundation, strip opening and replacement of unserviceable parts such as impeller, bushes, shaft sleeve, gland plate, gasket packing, studs bolts, nuts, washer etc. including repair to bearing seat and lathe work, turning, grinding, filling of material, finishing etc. on shaft and shaft key way as required including greasing/oiling and re-assembling the pump with proper alingnment with motor and testing complete all as specified and directed by Engineer-in-Charge. Note :- (i) Major items like impeller, bearing, bush, gland plate, tyre coupling, coupling assembly shall be measured and paid for separately under respective items of BOQ as “Supply only”. (ii) Cost for transportaion to workshop and carry back to site after repair is inlcuded in the unit rate of item nothing extra shall be paid on this acount.

All as per item No 1.00 above but servicing of centrifugal pump 100 / 75 HP

All as per item No 1.00 above but servicing of centrifugal pump 60 / 50 /40/30/25/20HP

All as per item No 1.00 above but servicing of centrifugal pump 15 / 12.5/10 HP

All as per item No 1.00 above but servicing of monoblock pumpset 1 HP to 7.5 HP

Supply only CI impeller suitable for centrifugal Pump set capacity 150 / 125 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 2 here-in-above but centrifugal pump capacity 100 / 75 HP

All as per serial item No 2 here-in-above but centrifugal pump capacity 60 / 50 HP

All as per serial item No 2 here-in-above but centrifugal pump capacity 40 / 30 HP

All as per serial item No 2 here-in-above but centrifugal pump capacity 25 / 20 HP

All as per serial item No 2 here-in-above but centrifugal pump capacity 15 / 10 HP

All as per serial item No 2 here-in-above but centrifugal pump capacity 7.5 / 5 HP

All as per serial item No 2 here-in-above but monoblock pump set capacity 7.5 / 5 HP

All as per serial item No 2 here-in-above but monoblock pump set capacity 3 / 2 / 1 HP

Supply only Stainless steel Bush suitable for centrifugal Pump capacity 150 / 125 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 3 here-in-above but centrifugal pump capacity 100 / 75 HP

All as per serial item No 3 here-in-above but centrifugal pump capacity 60 / 50 HP

All as per serial item No 3 here-in-above but centrifugal pump capacity 40 / 30 HP

All as per serial item No 3 here-in-above but centrifugal pump capacity 25 / 20 HP

All as per serial item No 3 here-in-above but centrifugal pump capacity 15 / 10 HP

All as per serial item No 3 here-in-above but centrifugal pump capacity 7.5 / 5 HP

Supply only Gland plate suitable for centrifugal Pump capacity 150 / 125 HP motor complete all as specified and directed by Engineer-in-charge.

All as per serial item No 4 here-in-above but centrifugal pump capacity 100 / 75 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 60 / 50 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 40 / 30 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 25 / 20 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 15 / 10 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 7.5 / 5 HP

All as per serial item No 4 here-in-above but centrifugal pump capacity 3 / 2 HP

S&F in replacement Rubber tyre coupling FC Type suitable for centrifugal pump 150 / 125 HP including replacement of nut, bolts etc. complete all as specified and directed by Engineer-in-Charge.

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 100 / 75 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 60 / 50 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 40 / 30 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 25 / 20 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 15 / 12.5 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 10 / 7.5 / 5 HP

All as per item No 5.00 above but Rubber coupling suitable for centrifugal pump 3 / 2 / 1

M&L for rewinding of electric motor of 150 HP, three phase, 415 volts, AC with super enamelled copper winding wire of existing gauge including varnishing, baking, cotton tape and assembling and testing all as directed by Engineer-in-charge.

All as per item No 6.00 above but rewinding of motor of 125 HP.

All as per item No 6.00 above but rewinding of motor of 100 HP.

All as per item No 6.00 above but rewinding of motor of 75 HP.

All as per item No 6.00 above but rewinding of motor of 60 / 50 HP.

All as per item No 6.00 above but rewinding of motor of 40 / 30 HP.

All as per item No 6.00 above but rewinding of motor of 25 / 20 HP.

All as per item No 6.00 above but rewinding of motor of 15 / 10 HP.

All as per item No 6.00 above but rewinding of motor of 7.5 / 5 HP.

All as per item No 6.00 above but rewinding of motor of 3 / 2 HP.

M&L for taking out unserviceable submersible pump set of capacity 5 to 15 HP from borewell with electrical wiring carefully by chain pully block or other T&P as required on site and dismantling the pump and motor and replacement of defective parts such as iron stainer, bronze impeller, gun metal bushes, stainless steel sleeve, impeller key, thrust bearing, nut-bolts, washer, lugs, terminal plate and reassembling of the same and lowering in well in its original position with electrical wiring, making proper electrical connections and testing complete all as specified and directed by Engineer-in-Charge. Note : - (i) Rewinding of submersible motor, Iron stainer, bronze impeller, gun metal bushes stainless steel sleeve, impeller key and thrust bearing if required for replacement shall be paid separetly against respective items of BOQ as "Supply only". (ii) Lathe work and grinding of shaft if required shall be paid separately against respective items of BOQ. (iii) Cost of new nuts, bolts, washers, lugs and terminal plate required to be replaced is included in the unit rate of item quoted by the contractor and nothing extra shall be paid on this account. (iv) Cost for transportaion to workshop carry back to site after repair is inlcuded in the unit rate of item quoted by contractor and nothing extra shall be paid on this acount.

(a) Water seal for pump 5/7.5/10 HP

(b) Bronze impeller with key upto 6 stage for pump 5/7.5/10 HP

(c) Gun metal Bush for pump 5/7.5/10 HP

(d) Thrust bearing of Gun metal for pump 5/7.5/10 HP

(e) motor coupling for pump 5/7.5/10 HP

(f) Water seal for pump 12.5/15 HP

(g) Bronze impeller with key upto 6 stage for pump 12.5/15 HP

(h) Gun metal Bush for pump 12.5/15 HP

(j) Thrust bearing of Gun metal for pump 12.5/15 HP

(k) motor coupling for pump 12.5/15 HP

Supply only PVC rope / toching rope minimum 2.5cm dia for submersible pump complete all as specified and directed by Engineer-in-Charge.

Rewiding of motor, submersible type of capacity 5/7.5/10 HP with copper winding wire of existing gauge including varnishing, baking, cotton tape and greasing of bearings, bushes and other connected parts and making necessary hook/clamp arrengement or body for attaching pvc rope complete all as specified and directed by Engineer-in-Charge.

All as per item No 6.00 above but rewinding for submersible motor capacity 12.5/15 HP

S&F in replacement of GI column pipe for submersible pump 80 mm dia bore, 'heavy grade', ISI marked both end flanged and 3 mtr length piece with nut bolts and gasket etc complete all as specified and directed by Engineer-in-Charge.

Supply only in replacement of uPVC column pipe, heavy duty, ISI marked, for submersible pump 80 mm of socket/outer thread end of 3 mtr length complete all as specified and directed by Engineer-in-Charge.

Supply only in replacement of uPVC column pipe, heavy duty, ISI marked, for submersible pump 100 mm of socket/outer thread end of 3 mtr length complete all as specified and directed by Engineer-in-Charge.

Rewiring of star-delta starter for motor of capacity upto 150 HP three phase, 415 volt, AC and replacement of unserviceable copper thimbles, nut bolts, electrical control wiring, pvc connectors, links etc including any additional alternation in panel as required for fixing of new items complete all as specified and directed by Engineer-in-Charge.

Supply only in replacement of submersible cable, 1100 volts, IS:694, flat type, copper conductor of size 16 sqmm 3 core laying in cable duct, GI protection pipe, fixed on wall etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 15.00 above but submersible cable, 10 sqmm 3 core.

All as per item No 15.00 above but submersible cable, 6 sqmm 3 core.

All as per item No 15.00 above but submersible cable, 4 sqmm 3 core.

Supply only in replacement of PVC insulated single core copper conductor cable, 1100 volts, IS:694, unsheathed, Heat resistant and Flame retardant of size 50 sqmm complete all as specified and directed by Engineer-in-Charge.

All as per item No 16.00 above but copper cable 35 sqmm.

All as per item No 16.00 above but copper cable 25 sqmm.

S&F in replacement of power contactor, 3 Pole, AC3 rating 160 Amp, with auxillary contacts/ Add On Blocks, 2 NO + 2 NC, coil voltage 230 / 415 Volts, 50 Hz, AC complete all as specified and directed by Engineer-in-Charge.

All as per item No 17.00 above but contactor, AC3, 120 Amps

All as per item No 17.00 above but contactor, AC3, 95 Amps

All as per item No 17.00 above but contactor, AC3, 80 Amps

All as per item No 17.00 above but contactor, AC3, 65 Amps

All as per item No 17.00 above but contactor, AC3, 50 Amps

All as per item No 17.00 above but contactor, AC3, 40 Amps

All as per item No 17.00 above but contactor, AC3, 32 Amps

All as per item No 17.00 above but contactor, AC3, 25 Amps

All as per item No 17.00 above but contactor, AC3, 12 Amps

Supply and fix in replacement of thermal overload relay , adjustment range (84-135) (62-99) Amps, 3 phase, 415 volt, 50 Hz AC including mounting block and all electrical connection complete all as specified and directed by Engineer-in-Charge.

All as per item No 18.00 above but O/R relay adjustment range (48-65) Amps

All as per item No 18.00 above but O/R relay Adjustment range (37-50) / (30-40) Amps

All as per item No 18.00 above but O/R relay Adjustment range (16-24) Amps

All as per item No 18.00 above but O/R relay Adjustment range (9-13) / (7-10) / (5.5-8) / ( 4-6) / (2.5-4) Amps

Supply only in replacement of electronic timer for star-delta starter (0-60) sec, 230/415 volt AC

Supply only in replacement of single phase preventor for 3 phase motor, auto reset, 230/415 volt AC

Supply and fix in replacement of MCCB, 3 Pole, 415 V AC, 50 Hz, 50kA, 400 Amps, with spread terminals, nut bolts, washer etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 21.00 above but MCCB, 250 Amps

All as per item No 21.00 above but MCCB, 200 Amps

All as per item No 21.00 above but MCCB, 160 Amps

All as per item No 21.00 above but MCCB, 125 Amps

All as per item No 21.00 above but MCCB , 63 Amps

Supply and fix in replacement of three phase submersible pump contoller, fully automatic Star-Delta starter, in sheet metal enclosure, 415 V, 50 hz, 3 phase, for 20 HP pump, relay (13-21) Amps with single phase preventer and all electrical connection complete all as specified and directed by Engineer-in-Charge. Make: L&T Model: MU-G20 FASD cat No SS95984DOCO / BCH

Supply and fix in replacement of three phase submersible pump contoller, DOL starter, in sheet metal enclosure, 415 V, 50 hz, 3 phase, for 5 HP pump, relay (6-10) Amps with single phase preventer and all electrical connection complete all as specified and directed by Engineer-in-Charge. Make: L&T Model: MU-G6 DOL cat No SS97756COTO

S&F Earth continuity conductor or main earthing lead size 32x6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed by Engineer-in-Charge.

M&L for servicing of gear box, Ratio 70:1, by strip opening and greasing oiling, lathe work, ginding, finishing work on shaft including replacement of shaft key, bush/ bearing, oil seal, packing etc complete all as specified and directed by Engineer-in-Charge.

Supply only of gear grease Castrol EPL2 / Indian Oil Servogem EP2

Supply only of belt B38/ B46 or approximate size. Make: Fenner

Supply only Vee Belt suitable for air blower capacity 2460 m3/hr, 50 HP

Supply only of gear oil for air blower (Castrol Hypoy 90EP, HP EP90) complete all as specified and directed by Engineer-in-Charge

Supply only of nylon gland packing rope of size 10/12/14 sqmm as required and directed

M&L for repair to chlorine gas dosing system by strip opening of chlorinator dosing capacity upto 2 kg per hour by strip opening and replacement of unserviceable inlet valve, adjustable valve, main diaphragm, disk diaphragm, pressure spring, flow meter with float element, O rings, pvc pipe adopter, gasket, washer etc and re-assembling the same and testing complete all as specified and directed by Engineer-in-Charge.

S&F in repair chlorine enjector assembly suitable for chlorine gas dosing capacity upto 2 kg/hr as per existing model and type complete with necessary fitting and testing complete all as specified and directed by Engineer-in-Charge.

S&F in repair to uPVC Pipe 25 mm (SCH-40) with all fittings i.e. socket, elbow, union etc complete all as specified and directed by Engineer-in-Charge

S&F in repair to uPVC ball valve, heavy duty, 25 mm complete all as specified and directed by Engineer-in-Charge

S&F in repair heavy duty PVC flexible water pipe, 9 mm complete all as specified and directed by Engineer-in-Charge

S&F in repair to Foot valve PVC 25 mm, heavy duty complete all as specified and directed by Engineer-in-Charge

M&L for repair to roller assembly of flocculator by replacement of bearing, repair to bearing seat and repair to outer surface of the roller including lather work and adding material to outer surface as required and grinding and finishing work complete all as specified and directed by Engineer-in-Charge.

S&F in repair to On-load change over switch I-O-II, open execution, 4 pole conforming to IS:13947, 630 Amps with handle, fixed in existing electrical panel and all electrical connection and testing complete all as specified and directed by Engineer-in-Charge.

All as per item No 38.00 above but On-load change over 250 Amp

All as per item No 38.00 above but On-load change over 160 Amp

All as per item No 38.00 above but On-load change over 100 Amp

All as per item No 38.00 above but On-load change over 63 Amp

SHARMA CONSTRUCATION COMPANY (BID ID -3385457)