REPAIR TO JOINERY AND OTHER REPAIR WORK IN ZONE-III AREA UNDER AGE B/R-II OF GE (I) KANPUR

Amount

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5sqm but n.exc 4.00sqm complete all as specified and directed.

Taking down shutters of any description exc 1 Sq.m and n.exc 2 sq. m each complete all as specified and directed.

S & F solid PVC Moulded door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS Square tube edges will be painted to match with prelam sheet as per specification & drawing incl. making good the damaged wall with plaster or concrete complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face as per specification & drawing, complete all as specified and directed.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.

S & F Aluminium 125 mm, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 125 mm long Extruded aluminium ally handles, fabricated type, anodised complete all as specified and directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

All as per item No. 9 above, but size 50 x 125mm completed all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F for Factory made solid panel PVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.

S & F 100 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.

S & F 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.

S & F 200 mm aluminium anodised barral tower bolt of extruded section complete all as specified and directed.

S & F 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F of 150 mm long Floor door stopper aluminum alloy body and double legged with rubber shoes in bottom tongue, complete all as specified and directed.

S&F powder coating (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, tower bolt, sliding door bolt, etc. as per requirement, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 5.50mm thick sheet glass, ordinary quality in square exc 0.5 sq.m in each, complete all as specified & directed.

Material and labour for door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, complete all as specified and directed.

All as per item No. 23 above, but wire gauzed window, complete all as specified and directed.

All as per item No. 23 above, but window area exc 1 sqm but not exc 2.00 sqm each , complete all as specified and directed.

All as per item No 23 above, but window area exc 1 sqm but not exc 2.00 sqm each, complete all as specified and directed.

S&F Framed work such as grills, grating etc. with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F factory made steel tubular Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality in square n.exc 0.5 sq.m in each fixed with putty or beads/clips, etc. complete all as specified & directed.

S&F 3mm thick figured glass, pin head type in squares n.exc 0.5 sq. m in each pane fixed with putty or beads/clips, etc. complete all as specified and directed.

M&L for Easing of door / window shutters of any size/any description / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type including screws and other necessary fitting for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and 1.40 mm averaage width of operature fixed with tinned tacks or galvanished wire staple complete all as speficied & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality in square n.exc 0.5 sq.m in each fixed with putty or beads/clips, etc. complete all as specified & directed.

S&F 3mm thick figured glass, pin head type in squares n.exc 0.5 sq. m in each pane fixed with putty or beads/clips, etc. complete all as specified and directed.

S & F in repair 150mm size extuded aluminium handle fabricated type anodized complete all as specified and directed.

S & F in repair 200 mm aluminium anodised barral tower bolt of extruded section complete all as specified and directed.

S & F in repair 300 mm long aluminum anodized sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Dismantling boarding , any description , fixed in any position with screws complete all as specified and directed.

M&L 12mm Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber/GI/ Aluminium framework with screws for door, cupboard self, etc complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture with Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm to 2200mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining including suitable fillet, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specifed and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L Brick work with old size with sub class 'B' bricks straight or curved in plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L Brick work (except bricks) old size sub class ' B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick wall in CM 1:4 finished even & smooth complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint (any Colour ) over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over a coat of primer over applying a coat of wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Preparation of old decorated surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc of surfaces & leveling/ edging the disturbed places/edges using necessary filling of wall care putty to obtain smooth regular/ even finish using sand paper and applying One coats of oil bound distemper (of any colour), complete all as specified and directed.

M/L for complete removal of existing treatment & preparation of old decorated surfaces of walls, cornices etc including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying Two coat of cement paint (any colour ) on wall with brush complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for 7 to 8 mm thick non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM(1:4) complete all as specified and directed.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM(1:4) complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type BO (using 12.5mm graded stone aggregate) as in floor finishing surface even and smooth with using extra cement complete all as specified and directed.

M/S MAA TARA TREATMENT PROJECT (BID ID -3165224)

The Real Contractors (BID ID -3159616)

JOG CONSTRUCTION (BID ID -3160433)

Khushi Muskan Engineer & Developer (BID ID -3156345)