Supply of Furniture for KBN RDA Office at RIICO Office EPIP Neemrana Amounting to Rs 3.50 Lakh

Amount

Executive Table Size shall be 1800 Width mm x 900 Depth mm x 740 Height mm. Table top shall be 25 mm thick plain particle board PPB Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate bd) Flat edge Duly sealed with 2 mm thick PVC beading. The modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick decorative laminate DL on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU 5216 LHS size shall be 1550 Width x 450 Depth x 705 Height. The top of Finesse ERU 5216 LHS shall be 25 mm thick plain particle board PPB Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate BDL Flat Edge duly sealed with 2 mm thick PVC beading The Modesty shall be 18 mm thick plain particle board PPB Clad with 1.0 mm thick Decorative Laminate DL on both sides. Edge sealed with 2 mm thick PVC Beading

Enterprise Table with CPU Hanger Size shall be 1650 Width x 9000 Depth x 728 Height mm Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding Understructure Modesty Panel 18 mm thick Pre laminated particle board The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA Finish powder Coat epoxy polyster Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW A Tube finish powder coat epoxy polyster The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 and MS bolt The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat epoxy polyster plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat epoxy polyster plus lock with 10 lever and handle and leveller The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat epoxy polyster and vertical wire carrier 0.8 mm thick CRCA Finish powder coat epoxy polyster Product shall have Greenguard Certificate.

Executive type revolving thrive high back chair The seat is made up of 1.4+0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam It has a seat depth adjustment of 5.0+0.3 cm integrated in the seat through a sliding mechanism SEAT SIZE 50.0 cm (W)x49.0cm(D) The Back is injection moulded in Glass filled Polyamide which is upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 6.0+0.1cm BACKSIZE 50.0cm(W)x68.0 cm(H) The polyurethane foam for seat is of density 55+5kgm3. The height adjustment armrest is made of Polyamide struture and polypropylene Housing with moulded PU armtop having a adjusted of 7.0+0.3 cm The inner tube of armrest is chrome plated The mechanism is designed with the following features 360 revolving type Centre tilt Synchro 3 position including upright lock giving option of variable tilt angle to the chair with anti shock feature The Headrest is injection moulded din Glass Filled Polypropylene which is upholstered with foam and fabric has an adjustment of 6.0+0.1cm and its assembled over the Full back chair The pneumatic height adjustment has an adjustment stroke of 8.5+0.3cm The pedestal is injection moulded polymide and fifted with 5 nos twin wheel castors The pedestal is 66.0+0.1cm wheel Diameter The twin wheel castors are injection moulded in black Glass filled polyamide having 6.0+0.1cm wheel Diameter The powder coated frame is made of Dia 2.8+0.03cm x0.2+0.02 cm the MS Round tube The frame is fitted with plastic caps made of injection moulded glass filled Polypropylene76(W)x76(D)x100-109(H)x45-54(SH)

Revolving Computer chair The seat and back shall be made from 1.2+ 0.1cm thk hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Copolymer Polypropylene. The HR polyurethane foam shall be moulded with density. 45+2.kg m3 and hardness load 16+2 kgf as per IS7888.for 25 compression. The onepiece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 +0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360 revolving type 14+2 maximum back tilt only Upright position locking Tilt tension adjustment The pneumatic height adjustment shall has an adjustment stroke of 11.0+0.3cm The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30 glassfilled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 +0.5cm. pitch centre dia. 72.0 +1.0cm with castors. The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height min 43.0 to max 54.0cm Height min87.5 to max 98.5cm Width and Depth of Chair as measured from pedestal Width 71.0 cm and Depth 71.0 cm.

Stylo Computer table Stylo size shall be 1200 Width mm x 600 Depth mm x 750 Height mm. Table top shall be 18 mm PPB with 35 KGS shelf shall be 12.5 KGS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board 3 mm prelam MDF board. Metal parts shall be BM Slide For Keyboard plus castor mounting table plus locking bracket plus angle clit. Hardware shall be Screw, KD fitting, Wooden Dowel, PVC ibserts. Construction shall be KD fitting, Wooden dowel andAngle Clit.

Office peacock type knock down wooden chair with arms back height 83 cm depth 56 cm and seat height of 45 cm back seat width 54 cm upholstered with leatherette cloth. Cloth of superior quality with seat and back will have 1 thick high density PU foam complete as per approved sample

Peacock type knock down wooden chair without arms back height 82 cm depth 52 cm and seat height 45 cm back seat width 49 cm upholstered with superior quality leatherette cloth. seat and back with 1 thick density PU approved sample

Office full back peacock type knock down wooden chair with arms back height 83 cm and seat height of 45 cm back seat width 54 cm upholstered with leatherette cloth. Cloth of superior quality with seat and back will have 1 thick high density PU foam complete as per approved sample

Office wooden rack 25 mm thick top 18mm thick understructure swing door with lock and handles. high adjustable levelers pre laminated particle board (Melamine finish) and dual tone finish having size W1500mm D-480mmx H-750mm

Sofa 2 seater the seat should be made of pu foam with density 32+2 kg cu. mtr having an additional top layer of j pu foam with density 28+2 kg cu. seat should be upholstered with fabric or leatherette. 2 back foam the back should be made of pu foam with density 28+2 kg cu. mtr with two additional top layer of supersoft foam of density 232 kgcu. Mtr upholstered with fabric or leatherette understructre understructure should be made up of 1.2+0.1 cm. thick hot pressed plywood ocpqltapl141-8 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly it should be a welded assembly made in stainless steel grade ss 202 tube and plate. Width (W) 146.0 CM. Depth (D) 92.0 CM. Height (H) 82.0 CM. Seat Height SH 45.0 CM

Sofa 1 seater seat the seat should be made of pu foam with density 32 +2 kg cu.mtr having an additional top layer of j pu foam with density 28+2 kg cu. seat should be upholstered with fabric or leatherette. 2 back foam the back should be made of pu foam with density 28+2 kg cu. mtr with two additional top layer of supersoft foam of density 23+2 kgcu. mtr upholstered with fabric or leatherette understructre understructure should be made up of 1.2+0.1 cm. thick hot pressed plywood ocp qlta pl14-18 4. dia 4mm zigzag spring assembly should be mounted in understructure for support and additional cushioning purpose leg assembly it should be a welded assembly made in stainless steel (grade ss 202) tube and plate.Width 86.0 CM. Depth 92.0 CM. Height 82.0 CM. Seat Height (SH) 45.0 CM