Construction of Conventional Centre at Semmozhi Poonga Premises

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed and cleaning and levelling the site etc., complete - Narrow Foundations - First Depth 2.00m

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed and cleaning and levelling the site etc., complete - Narrow Foundations - Second Depth - 2.00m - 3.00m

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed and cleaning and levelling the site etc., complete - Open Earth Work Excavation

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - upto 3.30m Level

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - 3.30m - 4.30m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - 4.30m - 5.30m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - 5.30m - 6.30m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - 6.30m - 7.30m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. - 7.30m - 8.30m

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For Plain surfaces such as RCC floor slab, roof slab, beams, etc. - at 8.40m Level

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For Curved surfaces such as RCC floor slab, roof slab, beams, etc. - at 8.40m Level

Providing and laying in position Standardised Concrete Mix M- 30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Upto Basement

Providing and laying in position Standardised Concrete Mix M- 30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Ground Floor

Providing and laying in position Standardised Concrete Mix M- 30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - First Floor

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Supplying and filling the basement with Good Earth, 5Km away from the site and filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Upto Basement

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- Ground Floor

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)- First Floor

Brick Partition walls in CM 1:3 (one cement & three Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X23/4" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - Ground Floor

Special ceiling plastering in all floors and finishing the exposed surface of RCC items of work such as slab, beam, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with cement mortar 1:3 (One cement and three plastering sand (P- Sand)) 10mm thick including hacking the surfaces and providing cement mortar nosing, beading for sunshade, staircase, step, landing slab etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (One cement and five plastering sand (P- Sand)) 12mm thick in all floors including cost and conveyance of all materials to site etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:4 (One cement and four plastering sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site etc., including neat finishing and curing etc., complete complying with standard specification and as directed by the departmental officers.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness 80mm as directed by the departmental officers.etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three plastering sand (P- Sand)) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Providing Pivot double swing frameless glazed door with 12mm thk. toughened glass of approved colour. The glass door should be fixed over Hydraulic Floor Springs of various sizes, Double Action Hydraulic Floor Spring of approved quality, brand, manufacture asper BIS Standards for doors including cost of cutting floors as required, embedding in to floors and stainless steel cover plates with aluminium pivot and single piece MS sheet outer box with side plate etc., capable of taking upto 130 kg. weight from door shutter, like HARDWYN make (U-32) or its Equivalent with ISI monogram. The rate is inclusive of supply and fixing of hardwares like overhead closure, patch fittings, door handle, lock etc. The door shoud be got approved by Departmental officer before use.

Supply & fixing of teak wood glazed door shutters with 6 mm thk. toughened glass for panel. Shutter with top rail 125 x 50 mm , bottom rail 150 x 50 mm, vertical styles 100 x 50 mm size teak wood, including labour charges and cost of necessary stainless steel furniture fittings etc. complete as per drawings and specifications.

Supplying and fixing first quality teak wood frames for doors, windows, ventilators and other similar joinery works with the following sizes and sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc. complete in all floors.

Teak wood Scantlings over 2M and below 3M

Teak wood Scantlings above 3M

Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for Nos vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work.

Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for Nos shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work.

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers

Design, customize, Supply and fixing UPVC (Un-Plasticized Polyvinyl Chloride) fixed glazing with the profile of outer frame 60mm x 58mm size of approved colour and fixed with transparent toughened glass 12mm thick. of approved quality. The outer frame UPVC Profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame . The corners and joints should be welded and cleaned. The frame should be fixed to the wall with 100% packing with SS screws and silicon sealant and gascut packing all round the frames.

Design, customize, Supply and fixing UPVC (Un-Plasticized Polyvinyl Chloride) fixed glazing with the profile of outer frame 60mm x 58mm size of approved colour and fixed with opaque toughened glass 12mm thick. of approved quality. The outer frame UPVC Profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame . The corners and joints should be welded and cleaned. The frame should be fixed to the wall with 100% packing with SS screws and silicon sealant and gascut packing all round the frames.

Design, customize, Supply and fixing of sound proof Spider fitting glass curtain wall system using aluminium profile 6063 T5 / T6 Grade , non thermal break, sound reduction RW to 48 Db., and Wind and water tightness to 1000pa fixed with toughened glass 12mm thick. of approved quality. The Spider Fitting are made of 316 Alloy Stainless Steel. The corners and joints should be of 100% packing with silicon sealant etc. complete.

Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three plastering sand (P- Sand)) 20mm thick laid in-situ and pointed with same coloured cement etc,complete as per standard specification.

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing skirting 100mm depth with Kotah slab /stone or Macherla stone, 22 -25mm thick of approved colour and quality in cm 1:3 (one of cement and three of Plastering Sand (P- Sand)) 20mm thick and other similar works including fixing in position cutting, pointing the joints with colored cement pigment with cement slurry , curing etc., complete in all respects for all floors as directed by the departmental officers.

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Skirting the wall with fine polished Granite Stone Slabs of size 4' X 2' / 20mm thick of Jet black best quality in Cement mortar 1:2 (one cement and three Plastering sand) - 20mm thick in all floors etc., complete complying with standard specifications and as directed by the departmental officers.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size 1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc., complete

Paving the floor with white Marble Slab (Adanga) 18mm to 20mm thick of size 1.2m x 0.60 m and above in all floors over a base layer of cement mortar 1:3 (one cement and three - P - Sand (Plastering sand)) 25mm thick over and white cement slurly layer of 3mm thick over this, laid in situ and pointed with white cement neatly and fixed in position so as to make perfectly smooth and shining to the alignment including cutting the marble slab to size with machine cutting, polishing using different grade of corporandam stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete

Providing skirting 100 mm depth with Indian marble, 18-20mm thick of approved colour and quality in cm 1:4 (one of white cement and four - P - Sand (Plastering sand)) 20mm thick and other similar works including polishing to the required level, fixing in position cutting, pointing the joints with colored cement pigment with cement slurry,curing etc., complete in all respects for all floors as directed by the departmental officers.

Providing Tactile Paver Type of New Tek BT Yellow Colour Ceramic Tiles of size 305 x 305 x 15mm of approved colour and pattern over C. M 1:3 (one cement and three plastering sand (P- Sand)) 20mm thick laid in-situ and pointed with same coloured cement etc,complete as per standard specification. for Vision impairment Person.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with Stone Dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and fixing of precast granite kerb stone of size 450x300x150 mm including the cost of Kerb stone, laying, transporting, pointing and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed

Providing Through Vertical Joint with 15mm space filled with bitumenous compound running from bottom of foundation upto the top of parapet wall in C.M 1:3 (one cement and three plastering sand (P- Sand)) as directed etc,complete as per standard specification.

Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.

Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel Nos. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge.

Providing coping with 3 line dressed natural rough granite of size 50mm x 280 mm in CM 1:4 over RCC / Brick walls as per drawings and specifications and as directed by the Engineer in charge.

Supply and fixing of terracota Murals of various sizes over the compound wall using required materials including scaffolding etc. as per drawings and specifications and as directed by the Engineer in charge complete. The Murals should be got approved by the Departmental officers before use.

Supply and fixing of ceramic tile Murals of various sizes over the compound wall using required materials including scaffolding etc. as per drawings and specifications and as directed by the Engineer in charge complete. The Murals should be got approved by the Departmental officers before use.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing Melamine polish of approved colour over new wood work, suitably prepared for receiving the polish by surface scraping, rubbing, applying filler, thinner, sealer etc. including cost of all materials etc. complete.

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting two coats of newly plastered wall surface with ready mixed Interior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting the new iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110 mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15 mm brass connections, 15 mm CP angle cork, 15 mm brass nipple (2 Nos.), 15 mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Providing and keeping in stores, shifting to the place of installation, fixing, testing and commissioning of vitreous china white color oval below counter wash basin of size 24" x 18" installed with brackets, CP Pillar cock, CP angle valve stopcock with connecting hose and wall flange, 32mm dia CP Waste Coupling and 32mm dia CP Bottle trap heavy with extension piece . The works shall include providing and laying 20mm thick granite slab on 65mm RCC base with wall supports with 75mm high granite facia as per architects drgs., bedding in white cement and finishing of joints in white cement with added color pigments. The rate is inclusive of making cut-out in the granite top for the basin with rounded edges complete as required and as approved by department officers (Make: Parryware or equivalent)

Supplying and Fixing in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour

Supplying & fixing of Coat hook with brackets including fixing over Wall tile dado / door shutter using suitable size non-corrosive screw nails etc. complete.(Make: Parryware or equivalent)

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying & fixing 20mm thick Granite slab of 1200 x 500mm size fixing between urinals to wall dado, cutting to required shape, polishing to all the exposed surfaces and edge chamfering, curving to approved pattern, cutting grooves in wall, grouting in cement concrete 1:2:4 mix etc complete

Supply & Fixing of two in one CP Health Faucet of the closet mounting type with hose connected two way BIB COCK complete fittings. (Make: Parryware or equivalent)

Supplying & fixing of CP Bibcock with wall flange. (Make: Parryware or equivalent)

Supplying & fixing of 20mm dia concealed CP stopcock with wall flange. (Make: Parryware or equivalent)

Supplying & fixing of Angle valve stopcock with connecting hose and wall flange. (Make: Parryware or equivalent)

Supplying and fixing of UPVC, SWR Grade Type – B / 15 kg class Pipes with specials, cutting the pipes, laying to slopes where required fixing to perfect plumb, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm, 90mm and 75mm dia conducting water test for joints and the materials, providing and fixing suitable supports by using dash anchor fastners, galvanized iron rod, bolts, nuts, washers and with shaped MS flats fixed to brackets, cutting grooves to conceal the pipes, making holes in all surfaces, restoring the damaged portions with required materials, providing scaffolding and remove where required making trenches to required size, refilling with excavated earth etc. complete. (MAKE : Supreme or equivalent)

Using 40mm dia pipe.

Using 50mm dia pipe.

Supplying Supreme or equal make UPVC Pipes SWR Grade Type – B / 6 kg / Sq.cm and Supreme or equal make PVC Pipe specials like bends, Tee, Y-junction with or without door, Vent cowl, providing and fixing cleaning / rodding eye with endcap wherever required, etc., cutting the pipes, laying or fixing to perfect plumb, with slopes where required, making joints using solvent cement solution or with ring seal couplers of size available pipe of 110mm and 75mm dia., providing and fixing G.I. U clamps to the brackets, Providing and removing necessary scaffolding where required making trenches, refilling with excavated earth, providing MS supports for pipes where ever necessary including providing and fixing necessary anchor fastners and clamps, conducting water test for leak proof joints and the materials,including making earth work in trenches, refilling the trench with excavated earth, watering, consolidating, disposing off surplus earth etc. complete.

Using 65mm dia pipe.

Using 75mm dia pipe.

Using 110mm dia pipe.

Using 160mm dia pipe.

Supplying and fixing Supreme or equivalent make Pan connector made out of UPVC with 110mm dia outlet, fixing to pipe work with rubber ring and other necessary materials, testing, to water tightness etc. complete.

Supplying and fixing custom made UPVC 6 kgf/sq.cm, Floor Traps with water seal made out of 110mm dia PVC Pipe with single or multiple inlets of size 40mm to 90mm dia plugging the bottom to water tightness, height to suit as per the site condition including using boss tee, fixing in position, laying cement concrete to 75mm alround in 1:3:6 mix using brick jelly to full depth sump, supplying and fixing hinged PVC grating of suitable size and shape, with frame over trap / sump at 4mm below floor level testing to water tightness, including providing fibre glass mating at bottom, inlet and outlet etc. complete.

Providing and fixing Cleanout Plug on PVC Pipe, installing to match the floor level height to suit as per site condition, providing necessary fixing materials like plugs, doors, brass threaded ends etc. complete.

75mm dia

110mm dia

Supplying & fixing of following SDR-13.5-CPVC Pipe of following sizes with CPVC brass threaded fittings, fixing pipe with pipe specials as specified by the manufacturer with required fixing materials, cutting groove on walls to conceal the pipe work, restoring damaged portion with required materials like sand cement & jelly, providing and removing necessary scaffolding, conducting hydraulic test to a pressure of min. 10 Kg / Sq.cm, storing the materials, lead and lifting charges to all locations and at all floors with in the site, providing MS supports for pipes where ever necessary, including providing and fixing necessary anchor fastners and clamps and as directed by the engineer in-charge. (Pipe sizes are mentioned in ID) MAKE: Astral flow guard or equivalent

15mm dia pipe

20mm dia pipe

25mm dia pipe

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

20mm dia Valve.

25mm dia Valve.

32mm dia Valve.

Supply and fixing of Supreme or equal make PVC Gully Trap of approved make 150 x 150mm size with 110mm dia outlet, making Pit excavation to a required size , laying concrete with 1:4:8 mix cement concrete in bed and surround for 300mm wide and 300mm deep, constructing chamber with a size of 230 x 230mm using brick work 115mm thick in cement mortar 1:4 up to a height of 300mm above Gully Trap or up to 100mm above paving level, plastering with cement mortar 1:3 to 20mm thick finishing to smooth surface inside, plastering with cement mortar 1:4 outside, providing 150 x 150mm size cast iron grating, providing 32mm thick precast cement concrete cover slab, clearing the surplus material, earth etc. complete.

Constructing Inspection Chamber of following sizes with 150mm thick cement concrete in foundation 1:3:6 mix using 40mm size stone jelly, 230mm thick brick work alround in cement mortar 1:5 mix using best quality bricks, plastering to 20mm thick with CM 1:3 for interior surfaces to smooth finish, plastering 15mm thick with CM 1:4 to exterior surfaces, forming benching in 1:3:6 cement concrete with 20mm jelly, channeling with CM 1:3, 20mm to smooth for benching and channel portion, providing 150mm thick RCC slab to required size with Steel in reinforcement, making suitable wooden form work, providing and fixing 600mm x 600mm Intl. size clear opening heavy duty (withstand 20,000 Kg) precast concrete fibre reinforced Manhole cover and frame, providing and fixing encapsulated Manhole step in PVC to Manholes beyond 1000mm depth, making earth work excavation to required sizes , refilling the sides with excavated earth disposing of surplus earth as directed by the site engineer etc. complete.

Internal size 600mm x 600mm up to 1M depth

Internal size 900mm x 900mm 1M to 1.5M depth

Providing rain water harvesting pit by earth work excavation in circular shape of 90 cm dia at 1.65m depth. The pit is encased with 5 nos of well ring each of 90 cm dia , 30 cm depth, 50 mm thick using RCC 1:2:4 using 20 mm metal. The slotted PVC pipe 110mm dia 6 kg pressure 1.20m depth shall be provided at centre of pit. The stone aggregate 40mm graded shall be filled as bottom layer 60cm depth with sand 30cm depth as Top layer. The top of the pit is covered with RCC 1:2:4 50mm thick perforated slab including cost and fabrication of reinforcement grills for ring and cover slab, labour charges, cost of materials, moulding curing, finishing and fixing in position etc. complete.

Supply, installation testing commissioning of 6 Zone Master Controllor. Heinrich/ Equivalent

Supply, installation testing commissioning of 240W Amplifier. Heinrich/ Equivalent

Supply, installation testing commissioning of 12 zone call station with microphone. Heinrich/ Equivalent

Supply, installation testing commissioning of 6W Ceiling Speaker with back box. Heinrich/ Equivalent

Supply, installation testing commissioning of 15W Wall Mount Speaker with back box. Heinrich/ Equivalent

Supply, installation testing commissioning of 9U Wall Mount Rack for controller and amplifier.

Supply and laying of 2c x 1.5 sqmm Copper armoured FRLS shielded cable. Varsha/Equivalent

Supply, installation testing commissioning of two loop addressable the Morley-IAS panel is ideally suited for use in the protection of small to medium sized buildings. Morley/Equivalent

Supply, installation testing commissioning of Repeater Panel. Morley/Equivalent

Supply, installation testing commissioning of Addressable smoke detector with base and accessories ( for above false ceiling ) Morley/Equivalent

Supply, installation testing commissioning of Addressable smoke detector with base and accessories ( for below false ceiling ) Morley/Equivalent

Supply, installation testing commissioning of Response Indicator

Supply, installation testing commissioning of Addressable Heat detector with base and accessories. Morley/Equivalent

Supply, installation testing commissioning of Addressable Multi detector with base and accessories. Morley/Equivalent

Supply, installation testing commissioning of Addressable beam detector. Morley/Equivalent

Supply, installation testing commissioning of Addressable Red Add Call Point, Mounting, Glass with Back box. Morley/Equivalent

Supply, installation testing commissioning of Intelligent Wall Mounted Strobe with red lens With Base. Morley/Equivalent

Supply, installation testing commissioning of Adddressble monitor module with accessories. Morley/Equivalent

Supply, installation testing commissioning of Adddressble Relay module with accessories. Morley/Equivalent

Supply, installation testing commissioning of Adddressble Isolator module with accessories.Morley/Equivalent

Supply, installation testing commissioning of Power supply unit. Morley/Equivalent

Supply and laying of 2c x 1.5 sqmm Copper armoured FRLS unshielded cable. Varsha/Equivalent

Supply and laying of 3.5 core x 300 sqmm 1100V XLPE armoured aluminium underground cable partly in a trench to be excavated at a depth of 0.75m putting 0.15m. layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good and partly on the existing cable trays with supports / in the existing cable trenches from Sub station to the MV panel. - SD 213

Supply and providing cable end termination of 3.5 x 300 Sq. mm XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and fixing of brass cable gland for 3.5 x 300 Sq.mm XLPE armoured LTUG aluminium cable with earth connection - SD 195

LIGHTING PANELS Supply and erection of 125 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar chamber made up of 14/16 SWG MS sheet for 3 phase 4 wire system with 25mm x 3mm tin coated copper flats for phases and neutral; cable chamber, switch chamber and with 2 Nos. 25mmx3mm tinned copper flat for the earth bus on the rear side of the panel board; necessary interconnections by copper flat of suitable sizes; suitable PVC colour sleeves for the interconnecting copper flats / rigid copper wire; earth connections to all swithces / bus bar by copper flats of suitable sizes from the earth bus; hylam sheet separation between bus bar and swithces; 1set LED pilot lamps with switches, fuse units, suitable angle iron frame size of 40mmx 40mmx 6mm with powder coated painting over one coat of red primer and with numbering; superscription of cables sizes, capacity of switches etc and incorporating the following: Incoming: 1 no. 125A TPN 15KA MCCB with all protective devices.Bus capcity 3phase 4wire 125 A cooper bus Outgoings: 1 No. 100A TPN 15KA MCCB with all protective devices. 4 nos. 63A TPN 15KA MCCB with all protective devices. Dummy provision - 1 No. 1set LED pilot lamps withfuse units, switches and interconnections. Inter connections to the bus bar by 25mm x 3mm TC copper flat for phases and neutral from 125A / 100A TPN MCCB the bus. Interconnection by SWG No.6 TC copper for the phases and neutral from the 63A TPN MCCB: 6mm thick hylam sheet separation between bus bar chamber and switches chamber; insulaters for the support for the bus; superscribing on the panel board the size, capacity of cable, switches, location etc. 2 nos. metalic danger boards -

Supply and erection of 100 Amps capacity floor mounting / wall mounting panel board (Cubical type) with bus bar chamber made up of 16 SWG MS sheet for 3 phase 4 wire system with 25mm x 3mm tin coated copper flats for phases and neutral; cable chamber, switch chamber and with 2 Nos. 25mmx3mm tinned copper flat for the earth bus on the rear side of the panel board; necessary interconnections by copper flat of suitable sizes; suitable PVC colour sleeves for the interconnecting copper flats / rigid copper wire; earth connections to all swithces / bus bar by copper flats of suitable sizes from the earth bus; hylam sheet separation between bus bar and swithces; 1set LED pilot lamps with switches, fuse units, suitable angle iron frame size of 40mmx 40mmx 6mm with powder coated painting over one coat of red primer and with numbering; superscription of cables sizes, capacity of switches etc and incorporating the following: Incoming: 1 no. 100A TPN 15KA MCCB with all protective devices. Outgoings: 4 nos. 63A TPN 15KA MCCB with all protective devices. Dummy provision - 1 No. 1set LED pilot lamps withfuse units, switches and interconnections. Inter connections to the bus bar by 25mm x 3mm TC copper flat for phases and neutral from 100A TPN MCCB the bus. Interconnection by SWG No.6 TC copper for the phases and neutral from the 63A TPN MCCB: 6mm thick hylam sheet separation between bus bar chamber and switches chamber; insulaters for the support for the bus; superscribing on the panel board the size, capacity of cable, switches, location etc. 2 nos. metalic danger boards

LIGHTING DB Supply and fixing of triple pole and neutral nine way MCB distribution board complete with the following and necessary neutral link, earth connector link etc. with bus bar and double door arrangements on surface / in flush with wall and making good of the concealed portion with earth connection Incoming: 1 No. 63A 10KA 4 pole MCB with 63A 4-pole 100 mA ELCB outgoing: 6 Nos. 40A DP 10KA MCB (LSB)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure and with 1no. 40ADP MCB type isolater as incoming and 6 nos. 6A, 10KA SP MCB as outgoing and double door arrangements in flush with wall/ on surface and making good of the concealed portion with earth connection.

POWER DB Supply and fixing of vertical type 4 way triple pole and neutral MCB sheet steel enclosure with bus and neutral link and earth link and with 1 no. 63A/100 A 4 pole MCB as incoming and 12 nos. 20A/32A, 10 KA SP MCB as outgoing with busbar and double door arrangements in flush with wall/ on surface and making good of the concealed portion with earth connection

Supply and fixing of vertical type 4 way triple pole and neutral MCB sheet steel enclosure with bus and neutral link and earth link and with 1 no. 63A/100 A 4 pole MCB as incoming and 12 nos. 20A/32A, 10 KA SP MCB as outgoing with busbar and double door arrangements in flush with wall/ on surface and making good of the concealed portion with earth connection

Supply and fixing of triple pole and neutral six way 7 segment 3 tier compartmental type MCB distribution board complete with the following and necessary neutral link, earth connector link etc. with bus bar and double door arrangements on surface / in flush with wall and making good of the concealed portion with earth connection. Incoming: 1 No. 63A 4 pole MCB with 63 A 4 pole 100mA ELCB 3 Nos. 63A 10KA DP MCB Outgoing: 18 Nos. 20A 10KA SP MCB

Wiring with 2 x 1.5 sq.mm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) etc, complete as per standard specifications. SD 16

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point etc, complete as per standard specifications SD 36

Wiring with 3 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade on suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A FT switch (two way) with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open staircase light point etc, complete as per standard specifications SD 4

Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications SD 87

Supplying and fixing of 1200mm ( 48'' ) sweep AC ceiling fan complete with regulator with 1M down rod including S & F of fan clamp with side plates and cross arm etc, complete as per standard specifications SD 107

Supplying and fixing of 1400mm ( 56'' ) sweep AC ceiling fan complete with regulator with 1M down rod including S & F of fan clamp with side plates and cross arm etc, complete as per standard specifications SD 108

Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LED (Phillips / Havells / equivalent) etc, complete as per standard specifications.

Supply and fixing of 18W LED 3000K Square Type Recessed Fitting with LED with LED (Phillips / Havells / equivalent) etc, complete as per standard specifications.

Supply and fixing of 18W LED 3000K Round Type Recessed Fitting with LED with LED (Phillips / Havells / equivalent) etc, complete as per standard specifications.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch etc, complete as per standard specifications SD 105

Supply and fixing of 300mm (12") sweep AC exhaust fan complete with necessary wall opening and making good of the wall etc complete as per standard specifications. SD 115

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . SD 233

Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. etc, complete as per standard specifications SD 234

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection etc, complete as per standard specifications SD 77

Supply and run of 4 X 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 Gl bearer wire for service connection mains etc, complete as per standard specifications. SD 68

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m etc, complete as per standard specifications SD.75

Supply and laying of PVC insulated XLPE, aluminium / copper conductor 1.1KV grade armoured, MV cable of the following sizes in the existing cable trays / trenches as required generally confirming to IS: 1554/Part - I / 1970 Note: If necessary the cables are to be laid in ground / in a trench to be excavated at a depth of 0.75 Mtr. putting 0.15 Mtr. layer of sand and covering the cable completely with brick and sand and refilling the earth to make good.

3 1/2 x 185 sqmm aluminium cable - 2 runs for the Capacitor Panel - SD 211

3 1/2 x 95 sqmm aluminium cable from main panel to the lighting panel - SD 208

4 x 10 sqmm aluminium cable SD 202

2 x 10 sqmm aluminium cable - SD 198

Supply and providing cable end termination of following sizes of XLPE armoured LTUG Aluminium cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

3 1/2 x 185 sqmm aluminium cable SD 242

3 1/2 x 95 sqmm aluminium cable SD 239

4 x 10 sqmm aluminium cable

2 x 10 sqmm aluminium cable

Supply and fixing of brass cable gland for XLPE armoured LTUG cable for following sizes with earth connection.

3 1/2 x 185 sqmm aluminium cable SD 193

3 1/2 x 95 sqmm aluminium cable SD 190

4 x 10 sqmm aluminium cable SD 185

2 x 10 sqmm aluminium cable SD 182

CABLE TRAY Supply and fixing of perforated cable trays of sizes as given below made out of 14 SWG CRCA sheet steel and hot dip galvanized with supports and at every 1.2 mtr. interval using supports of MS angle of suitable size. The supports shall be painted with Red-oxide primer and two quotes of aluminium paints.

150 x 25 mm - MR

300 x 50 mm - MR

450 x 50 mm -MR

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 15A 3 pin flush type non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point etc, complete as per standard specifications.SD 41

Supply and fixing 20A, 240V, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top alongwith 20A, DP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. (Legrand or equivalent Make) Vide distribution of electrical fixtures

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour etc, complete as per standard specifications. SD 56

Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth Wire connection of 14 SWG TC wire with painting of suitable colour etc, complete as per standard specifications. SD 62

Supply & run of 4 x 10 Sq.mm of PVC insulated unsheethed single core FRLS copper cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and and flooring with continous earth connection by 1 run of 2.5 Sq.mm PVC insulated unsheathed copper FRLS cable of 1100 V grade

Supplying, Fixing and testing and commissioning of MCCB / MCB / Isolator in a sheet steel enclosure on surface / recess including interconnection, painting etc. as required (The enclosure size shall be suitable for receiving the incoming and out going cable directly).

32 A TP 10 kA MCB

20/32A DP MCB

63A TP MCB

Supply, installation, testing and commissioning of terrace fire pump comprising of the following: Kirloskar/M & P or equivalentFor pump defined above & of duty as follows : Flow : 900 LPM Head : 35mwc Location:Terrace

Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel.Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels.Fabricated or equivalent

Supply, Installation, Testing and Commissioning of above ground of Heavy class MS pipe, ERW, as per IS:1239 Part-I with necessary fittings, with one coat of enamel primer with two coats of synthetic enamel paint of approved color / shade. including tees, elbows, reducers, union, flanges, rubber gaskets, All clamps, brackets etc. shall be of galvanized iron unless specified otherwire and then supply of the same shall also be included for rates under this head.Welding of any kind on the galvanized bracket support / hanger shall not be permitted.Jindal/equivalent Also rates including flusing and chemical cleaning of pipes.(above ground )

150mm dia

100mm dia

80mm dia

Supply, Installation, Testing and Commissioning of S.S. fire hydrant single landing valve with 80 mm N.B. flanged inlet, brass spindle 63 mm dia female instantaneous outlet type. GM coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS:5290. Including fixing with anchor fastner and flanged tapping from wet riser and providing provision for fixing of pressure gauge as complete as required. Kartar/shahbogilal/equivalent

Supplying & fixing of RRL Hose(as per IS : 636) 63 mm dia and 15m length as described below. The hose shall be rated for brust pressure of 35.7 Kg/sqcm. Hose shall be complete with ISI marked S.S. male & female coupling (IS:903) bound & rivetted to hose pipe with copper rivets & 1.5 mm copper wire (Location : Internal fire hydrant) Kartar/shahbogilal/equivalent

Supplying & fixing of 63mm dia instantaneous pattern branch short S.S. pipe, nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling complete as required. Kartar / shahbogilal / equivalent

Supplying & fixing swinging type First Aid hose reel in red colour drum with 36 mts long and 20 mm dia heavy duty rubber hose, 20 mm dia (IS:778, class - II) terminating with PVC Shutoff nozzle of 6mm outlet with MS socket for tap-off, drum and brackets (Red powder coated finishing) for fixing on wall with anchor fastner, bolts & nuts complete as required. Kartar/shahbogilal/equivalent

Supply, Installation, Testing & Commissioning of cast iron body wafer type Butterfly Valve of 150mm dia in size PN 16 (Body : CI, Shaft : SS, Disc : DI coated with anti corrosive epoxy, Liner : HT - EPDM) (upto 150mm dia with hand lever operation & above with gear box operation).pressure rating complete with matching flanges ANSI class # 150 with bolts & nuts etc.

Providing & fixing dial type (100 mm) pressure gauge with isolation valve suitable for working pressure . Cost shall be inclusive of fittings etc as required.

Supply, Installation of ABC Stored Pressure type Fire Extinguisher 5 kg with necessary accessories etc. (6kg) Safex/Equivalent

Supply, Installation of of CO2 type Fire Extinguisher 4.5 kg with necessary accessories etc. Safex/Equivalent

Supply, Installation of of 22.5 kg Trolley mounted CO2 type Fire Extinguisher with necessary accessories etc. Safex/Equivalent

Supply, Installation of of 25 kg Trolley mounted DCP type Fire Extinguisher with necessary accessories etc. Safex/Equivalent

Supplying and installing of in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC Non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners.The intensity of glow in dark should last not less than 2 hours and the strongest glow shall be produced in the first 30 minutes Prolite/Autoglow/Equivalent

Supply, installation, testing and commissioning of VRF outdoor units (Make LG/Toshiba or equivalent)

Air Handling Unit (AHU) Supply of Double skin AHU with Outer skin 0.6 mm Pre- coated G.I. Inner Skin 0.6 mm Plain G.I. Frame work, Thermal break Al profile with thermal barrier Thickness of insulated panels, 45 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) DIDW backward centrifugal fan with pre filters & fine filtera,mixing box , Material of Drain pan, SS 304-20 G Tray duly insulated with 13 mm closed cell Nitrile insulation. Unit Base G.S.S base channel. (Make Zeco / Edgetech / Waves / Citizen or Equivalent)

50 TR, ESP 35MM

30 TR, ESP 35MM

Air Handling Unit (AHU) Supply of Double skin HRW with Outer skin 0.6 mm Pre- coated G.I. Inner Skin 0.6 mm Plain G.I. Frame work, Thermal break Al profile with thermal barrier Thickness of insulated panels, 45 mm thick, CFC Free PUF injected (Density: 40 kg / Cu. m.) with control panel .(Zeco / Edgetech / Waves / Citizen or Equivalent)

Supply and Installationof VRF ductable units (LG/Toshiba or equivalent)

Supply, installation, testing and commissioning of VRF Hi wall Split type indoor units (LG/Toshiba or equivalent)

Supply, installation, testing and commissioning of VRF based 4 WAY CASSETTE UNIT (LG/Toshiba or equivalent)

VRF Y JOINTS FOR BRANCH DISTRIBUTION REFRIGERENT PIPE JOINTS ( LG/Toshiba or equivalent)

Supply and installation of necessary refnet-joints - Indoor branch joints

Supply and installation of necessary refnet-joints - Outdoor branch joints

AHU kit Supply and installation of AHU Kit (Zeco / Edgetech / Waves / Citizen or Equivalent)

Supply and Installation of Hard drawn Copper refrigerant pipes with necessary fittings, 19mm thick nitrile rubber inuslation for suction and Discharge line, supports, bends etc. ( Copper pipe - As per OEM Recommendations) (Insulation - Aflex/Kflex/Aerofoam or Equivalent)

Supply and fixing of Flexible CU Cabling in PVC conduit pipe and required supporting and accessories items for VRF unit. (Cable - Polycab or Equivalent)

2C X 1.5 Sqmm - Electrical Cu Shilded Flexible Cabling in PVC conduit pipe

4C x 10 sqmm CU arm

4C x 6 sqmm CU arm

Earthing 25x3 GI Flat

GI Wire -8 Swg

Supply and Installation of PVC Drain pipe with 9mm nitrile rubber Insulation for Indoor unit. (Insulation - Aflex/Kflex/Aerofoam or Equivalent)

Supply and installation of factory fabricated Rectangle GI ducting with TDF Flangewith supports, bends, elbows, joints, collars etc. . The support for the same shall be of slotted channel/ GI Rope supports.(GI Sheet - Tata/Jindal/Sail or equivalent)

20 Gauge

22 Gauge

24 Gauge

Supply and instalation Thermal insulation Nitrile Rubber Insulation Closed Cell Class O ,plain Facing, Density 40-60Kg/M3 - 13mm thick. (Aflex / Kflex / Aerofoam or Equivalent)

Supply and instalation Acoustic Insulation Nitrile Rubber Insulation Open Cell Class 1 , , Density 140-180Kg/M3- 10mm thick. (Aflex / Kflex / Aerofoam or Equivalent)

Supply and erection of 16G Fire dampers (Cosmic/Systemair or Equivalent)

Supply and erection of Actuators ( Belimo or Equivalent)

Supply and erection of GI Volume control dampers with flanges for mounting on Mouth Connection of ducts and units etc complete.Damper with Suitable links, levers and Quadrants for Manual Control. Frame - 18G, Blade - 20G, Depth - 150mm. Dampers - Cosmic/Systemair or Equivalent, Panels - CPRI Approved panel manufacturer GI Sheet - Tata/Jindal/Sail or equivalent

Supply & Installation of Aluminium Powder coated Supply air Diffuser with Collar dampers (Cosmic/Systemair or Equivalent)

Supply & Installation of Aluminium Powder coated Return air Diffuser without Collar dampers (Cosmic/Systemair or Equivalent)

Supply & Installation of Supply air Ext. Alu. Powder coated Linear Bar Grille, 0/15 degree deflection with Aluminium Collar Damper

Supply & Installation of Return air Ext. Alu. Powder coated Linear Bar Grille, 0/15 degree deflection without damper.Cosmic/Systemair or Equivalent

Supply and fixing Ext. Alu. Powder coated Fresh / Exhaust Air Louver with GI Bird Screen

Supply and Fabraction of MS angle for AC outdoor supports.

Supply and installation of 32mm thick closed cell nitrile rubber insulation. (Aflex/Kflex/Aerofoam or Equivalent)

Supply and installation of Electrical panel for VRF 64HP and AHU 50 TR (Panel - CPRI Approved panel manufacturer)

Supply and installation of Electrical panel for VRF 38HP and AHU 30 TR (Panel - CPRI Approved panel manufacturer)

Supply and installation of cable tray (Make - Tata/Jindal/Sail or equivalent)

Supply and installation of cable tray (Make - Tata/Jindal/Sail or equivalent)

Supply, Installation, testing & Commissioning of 125 KVA Generator With Auto Main Failure (AMF) Panel

Clearing the heavy jungles in the existing site and removal the same away from the site, the cost shall including all materials and labour charges etc, complete as per standard specification.

Design, Supply, Installation, Testing and Commissioning of ongrid Solar 100 KWP Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730- Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. c) Data Monitoring System complete with accessories. d) Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required.

Add :- GST @ 18%