SITC of VRV Air-Conditionin...

Amount

Supply, Installation, Testing and Commissioning of Modular Type outdoor units, equipped with Highly Efficient Scroll, all Inverter Compressor(s), special heat exchanger, Y- branch as required, outdoor unit support, auto check function for connection error, auto address setting,Refrigerant temperature control and capacity as mentioned below. VRV/VRF System shall be suitable for working on 50°C ambient temperature, Refrigerant R 410A. 40 HP (20 HP plus 20 HP ODU UNIT) Make:-Daikin, Blue star, Toshiba, Mitsubishi Electric

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. 2 TR or 2.5 HP (or above) 4 - way Cassette Unit Make:-Daikin, Blue star, Toshiba, Mitsubishi Electric

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. 3.2 TR or 4.0 HP (or aboe) 4 - way Cassette Unit Make:-Daikin, Blue star, Toshiba, Mitsubishi Electric

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 9.5 mm dia (3/8) (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 12.7 mm dia (1/2) (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation 28 mtr lumpsum in Admin Block 7 mtr lumpsum in Academic Block

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 15.86 mm dia (5/8) (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 19.1 mm dia (6/8) (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 22.2 mm dia (OD) (7/8) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 28.58 mm dia (11/8) (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 31.8 mm dia (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 34.9 mm dia (13/8) (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply and Fixing of Interconnecting copper refrigerant pipe work with thick duly insulated with Nitrile insulation between indoor and outdoor units as per specifications Approved Makes- Rajco/Mandev/Maxflow or as per directions of Engineer In- Charge 41.3 mm dia (15/8) (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply and Installation of Refrigerant R - 410A to top up the system as per directions of OEM.

Supply, installation, testing and commissionig of refrigerant Copper Y-joints

Supply, Installation, Testing and Commissioning of Master Remote Control panel including all necessary control wiring. Master Remote Control Panel shall be connected to all indoor/outdoor units and shall be of one touch screen type. Make- MITSUBISHI ELECTRIC / O GENERAL / DAIKIN /BLUE STAR/ TOSHIBA or as per directions of Engineer In-Charge Suitable for indoor units

CONTROL AND TRANSMISSION WIRING: Supply and Laying of 2 core x 1.5 sqmm PVC insulated copper conductor communication control cable in PVC Conduit. Approved Make : Havells/ Polycab/ RR Kabel/ Anchor/ KEI or as per directions of Engineer In-Charge

POWER CABLE: Supply and Laying of 3 core x 2.5 sqmm PVC insulated copper conductor cable for indoor units. Make : Havells/ Polycab/ RR Kabel/

Supply, installation, testing and commissioning of cubical type main MV panel board suitable for 3 Phase, 50 Hz and of 35 MVA rupturing capacity at 415 volts, fabricated from minimum 2mm thick CRCA sheet powder coated through seven tank process facility for prickling and degreasing complete with following mountings, interconnections etc. as required. (GA drawing of panel to be provided before fabrication). Panel shall be Floor mounted type with cable entry at the top and IP-65 Degree of protection. Panel shall be powder coated having colour shade RAL-7032. including the following switch gear and components: INCOMER: 1200A TPN EDO ACB - 01 Nos

Providing and fixing of MS Stand for Outdoor Units.

Bidder Name

Amount

UTILITY SERVICES (GSTN-07AABFU8051C2ZD) BID ID -1237247

SMD SOLUTIONS (GSTN-NA) BID ID -1241790

MVAC ENGINEERS (GSTN-NA) BID ID -1242110

Advance Air Solutions (GSTN-07BIYPG5915M2ZH) BID ID -1238011

MVAC ENGINEERS (BID ID -1242110)

UTILITY SERVICES (BID ID -1237247)

SMD SOLUTIONS (BID ID -1241790)

MVAC ENGINEERS (BID ID -1242110)

Advance Air Solutions (BID ID -1238011)

UTILITY SERVICES (BID ID -1237247)