Development of garden at ankolekar layout in ward no-35

Development of garden at ankolekar layout in ward no-35

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to

300 mm, removal of stumps of trees cut earlier and disposal of

Earth work excavation by manual means for drains,

canals, waste weir draft, approach channels, key

trench, foundation of Buildings & Bridges and such

similar works in all kinds of soils , as per dr...

Construction of Embankment by excavating the

available approved Gravel/Murrum deposited at a

place or borrow pits during or prior excavation with

all lifts and lead, transportation to site, spreadi...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Cod...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x200x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with su...

Addendum I Percentage Additionalities for Formwork,

Centering & Scaffolding Foundation upto PlinthI a.isolated

Addendum I Percentage Additionalities for Formwork,

Centering & Scaffolding Columns & Piers

Addendum I Percentage Additionalities for Formwork,

Centering & Scaffolding Beams & Linters of building

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, ty...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to ste...

Providing and fixing Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,

fixing in position and applying a priming coat of appr...

Providing and fixing Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,

fixing in position and applying a priming coat of appr...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, inclu...

Finishing walls with water proofing cement paint of required shade :New

work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after

thoroughly brooming the surface to remove all dirt, dust...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ker...

Removal of Unserviceable Soil with Disposal upto a suitable

distance as directed by the Engineer incharge of work

Supply and Fixng of Tai Chi Spinners: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached."As per NIUA guidelines, all products must tested and ...

Leg and Thigh Excercise/Air Walker, Providing, Supplying, foring, installation, commissioning and trial run of Air Walker. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped joi...

Providing, Supplying, fixing, installation, commissioning and trial run of Leg Press. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped, joints are robotic welded. All welded j...

Supply & Fixing of Two Seater See Saw: "The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, All products must be tested ...

Supply and Fixing of A Swing, The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. As per NIUA Guidelines, all components designed and manufacture...

Supply & Fixing of 150 CM Slide: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "As per NIUA Guidelines, all products must be tested and c...