SPECIAL REPAIR TO ATC TOWER AND MISC B/R WORK OF BATH/TOILETS IN TECHNICAL AND DOMESTIC AREA AT AFS PURNEA UNDER AGE (I) (AF) PURNEA

Amount

S&F in repair CP fancy type towel rod 18/20mm dia, 600mm long including brass screws and wooden/ plastic cleates of approved make (Prayag/Jaguar, Cera, Hindware etc) All as per specified and directed by Engr- in-charge. (Make : Prayag/Hindware/Jaguar

Cutting chase in brick wall for concealed water tubing or similar work etc and making good, cutting not exc 10cm girth.

Dismantaling floor, hearth or wall tiling including cement mortar bedding(but not backing) removing servicable tiles to store and rubbish off premises.

M&L rendering 15 mm thick in CM 1:6 on wall to receive tile.

M&L for screed bed or bedding 15mm thick in CM 1:6 on floor to receive tile.

S & F Non Skid Ceramic Colour Tiles 7 to 8 mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make - Somany, kajaria, Johnson.)

M& L glazed cermic coloured tile in vertical surfaces 300x450x7 mm thick set and joited in neat cement slurry and poited in white or coloured cement to match (Make - Somany, kajaria, Johnson.).

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 15 mm.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 20 mm

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 25 mm

S & F 15 mm dia tube medium grade with all fittings and fixed to wall, ceiling or floors

S & F 20 mm dia tube medium grade with all fittings and fixed to wall, ceiling or floors

S & F 25 mm dia tube medium grade with all fittings and fixed to wall, ceiling or floors(Each joint should be U/socket)

S&F 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and directed.(Approved make)

S&F 25mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed repairs, complete all as specified. (Approved make)

S & F in repair vitreous china squating pan orissa pattern size 580x440 mm white with integral foot rests(excluding flushing cistern and flush pipe ,connecting to trap and flushing pipe. (Make : Prayag/Hindware/Jaguar or equivalent or approved make).

S& fixed in repair Vitreous china wash down watercloset pan (pedestal pattern) white (excluding fixing bolts,flushing cistern Including plastic seat cover, flat bottom and CP hinging device ), complete all as specified and directed. (Make : Prayag/Hindware/Jaguar or equivalent or approved make).

S & F PVC value less symphonic action type flushing cistern low level white with inlet ball value float and handle including brackets 10 liter capacity, fixed in repairs. (Make : Prayag/Hindware/Jaguar or equivalent or approved make).

S&F in repair Vitreous china wash hand basin white flat back size 550x 400 including bracket with PVC waste pipe 32mm dia suitable length and waste fitting 32mm dia brass , chromium plated etc with long sunk and fly nuts , flange and bedded in red lead cement and othrer end complete all as specified . make - Parryware (Make : Prayag/Hindware/Jaguar or equivalent or approved make).

S & F 15 mm bore PVC connection with PTMT nuts of length 450 mm.

S &F PVC (SWR)Pipes ,75 mm bore single socketed in any length with rubber ring joints fixed to wall/floor ,

S&F PVC (SWR)75mm bend bore bends with access door any radius.

S&F PVC (SWR)110 mm bend bore bends with access door any radius.

S&F 110mm PVC (SWR) branch piece single (single Y)equal or unequal with access door

S&F 110mm PVC (SWR) junction single(single T) equal or unequal with access door

S & Fixed CP bib taps 15mm dia, cast copper alloy with crotch or butterfly handle. Fancy type. (Make : Prayag/Hindware/Jaguar

All as per item 26 above but fixed and repair

S & Fixed CP Stop valve/ stop cock /angle cock fancy type 15mm dia cast copper alloy with long shank and cup (concealed type) (Make : Prayag/Hindware/Jaguar

All as per items 28 above but fix in repair

S&F in repair CP pillar tap but fancy type with long shank and up 15mm dia (cast copper alloy with crotch or butterfly handle.(Make : Prayag/Hindware/Jaguar

M&L waste filtting ,brass chromium plated for 32mm dia glazed ware sink , basin, urinal etc .with long screwed shanks and fly nuts flazed ends bedded in red lead cement and other end fixed (Approved make)

All as per item No. 32 but fixed and repair

S&F PVC (SWR) floor trap with grating including jointing with solvent cement with outlet of 75mm

S&F PVC waste pipe for WHB 32mm dia

All as per item No 34 but fixed in repair.

S&F in repair PVC waste pipe for urinal/kitchen sink 38/40mm dia

Vitreous China Urinal, Half stall type, white, with PTMT spreder fixed in repair, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal including flush pipe, grating and Union for discharge pipe. (Make -parryware cat No -C0575 , White )

S&F PVC bathroom mirror 600x450mm, (Make : Prayag/Hindware/Jaguar

S&F in repair CP 2 in 1 Fauset (crome plated Faucet) (1 mtr Tube ) with Hook , (Make : Prayag/Hindware/Jaguar

M&L concrete bed in cement concrete 1:4:8 type D-2 to drain pipes (75/100 mm dia) including packing under and completely surrounding pipes with concrete after they are laid and tested in.

M&L for cement concrete type D-2 1:4:8 in (40 mm graded aggregate ) in foundation, filling and mass concrete.

M&L for cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25 mm thick as in floor

Taking down shutter of any description exc 1 Sqm n. exc 2 Sqm and easing, urgesting and refixing in the same opening

Taking down chowkats with shutter exc 1 Sqm but n. exc 2 Sqm (without taking of shutters from the frames.

S&F factory made PVC solid door frame (Chowkats) of size 50mmX47mm made out of 5mm plane colour PVC sheet in force with M.S. square tube supplying & fixing in opering as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame (with hinges/any fixing arrangement) at site as per specification & drawing.

S&F aluminium anodysed barrel towel bolts of xctruded section and fixed 125 mm long

S&F 250 mm long alumimium alloid anodysed sliding door bolts with hasp and staple of alumimium extruded section.

S & F aluminium alloy handle 125 mm fabricated type

M & L for complete removal of existing wall surfaces and applying 3 mm thick wall putty on wall surface and applying two coat of oil bound distemper over a coat of primer.

-ditto- same as item No. 51 above but on ceiling surfaces.

Demolition of brick work built in cement mortar or cement lime mortar any description

Taking down cement plaster of any description, including racking out joints hacking for key, scrubbing down with water etc complete on walls.

Demolition of cement concrete unreinforced as in floor and plinth n,exc 15 cm thick.

Taking down chowkats or frame without taking off shutters from frame not exc 1.5 Sqm each.

All as per item No 55 but exc 1.5 Sqm each

Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing) and rubbish off the premises

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L for 20mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough in sub floor/levelling course to recieve floor finishes complete all as specified and directed.(Window cill)

M & L for cement concrete 75 mm thick 1:3:6 type C2 (using 40mm graded stone aggregate) in paving/plinth protection finished even and fair without using extra cement.

M&L skid Ceramic coloured vetrified tiles 10 mm thick area of each tile but not exceeding 0.38 sqm, in floors etc. set and jointed in pointed in white or coloured cement to match (white tiles)

M & L for rendering 10mm thick in CM 1:3 for fixing tiles in vertical surfaces like dado/skirting etc complete .

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for preparation of new/old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty if reqd all as specified and directed. .

M&L for preparation of new/old surfaces on ceiling and applying two coats of OBD on wall over 3mm thick wall care putty etc complete all as specified and directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread,levelled, and blinded with earth and rammed including watering

S & F aluminium frame/shutters for windows/Ventilators complete wiith necessary arrangement to receive 4mm thick glass , fittings&fixing all as specified and directed by Engineer-in-Charge. NOTE : Weight of fittings such as roller wheels, rubber beading shall not be considered when measuring weight of aluminium shutter/framenecessary fittings&fixing including making good jams in CM 1:4 finished even and smooth all as specified and directed by Engineer-in-Charge.

S & F Rough cast wired glass, 6.4mm thick and glazing with oil putty in square exc 1.50sqm each pane

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ( 300mm long)

Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F pressed steel frame for doors with one or more rebates including necessary fixing logs, hinges, log, strike plate etc. complete all as specified. Size of frame is 105X65 mm.

M&L factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, 35mm thick

S & F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

Supply and fixed PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube. Fixing in opening as per specification and all as per drawing.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing.

S&F 150mm long Aluminium anodized barrel tower bolt of extruded section

S&F 100mm long stainless steel hinges, medium wight, complete all as specified and directed

S&F 150mm long aluminium handle, cast type annodised

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough in sub floor/levelling course to recieve floor finishes complete all as specified and directed.(Window cill)

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) finished even and rough in receiving hold fast.

S&F Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete ( Aluminum cast body)

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint

M&L Block boards, grade quality, exterior grade, decorative type with decorative face veneer on both face,,30mm tk

M&L fittings for Block boards, grade quality, exterior grade, decorative type with decorative face veneer on both face,,30mm tk (channels ,hinges,brackets ,latches etc)

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Preparing newly plastered surface of walls and applying two coat of weather resistant exterior emulsion paint over a coat of wall primer complete all as specified.

M&L two coat of synthetic enemal paint over acoat of red oxide primer Surfaces of new steel or iron surface, over 10cm in width or girth,not otherwise described Note:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.

shashi bhushan gupta

M/S. KESHAB CHANDRA GHOSH