e-NIT No.05 / (EnM)M-VIII/ 2025-26, Item No.05

Supply of MS Pipe 150 mm. Make:- TATA/Jindal Hisar/ DJB approved makes.

Supply of MS Pipe 100 mm. Make:- TATA/Jindal Hisar/ DJB approved makes.

Supply of nuts bolts and washers as per site requirement.

Supply of neoprene packing as per site requirement.

Supply of Sluice valve 150 mm, PN 1.0. Make:- IVC/ AV/MARCK/HAWA/ Kirloskar/DJB approved makes.

Supply of Non Return valve 150 mm, PN 1.0. Make:- IVC/ AV/MARCK/HAWA/ Kirloskar/DJB approved makes.

Dismantling the existing damaged suction & delivery line of pumpsets after isolating the electric supply from the LT Panel . Work including arranging all tools and tackles such as gas cutter, welding machine, grinder, etc required to remove/cutting the suction line rusted Nut & bolts and lifting the same with the help of heavy manual labour/hydra.

Fabrication of 150 mm dia. MS Pipe by welding of pipe. Work including welding, cutting the 150 mm dia. MS pipe as per site requirement and welding the MS bend, flanges, etc as required.

Fixing of fabricated MS pipe of 150 mm dia. For Pumpset at both suctions side with the help of heavy manual labour. Work including tightening the nut & bolts with NRV, rubber packing, washers, bend, etc. and considering all safety measures while executing the work at site.

Breaking of RCC by concrete breaker for foundation bolt pocket and foundation with RCC for complete foundation as required for fresh foundation with RCC upto the depth of 1 ft. This i/c removing of malba of CC from the foundation side by manual labour from ground floor to outside of pump house. Removing of foundation bolt by manual labour to clean by hammering of chisel to make the bolt free from the RCC foundation bolt.

Providing of SS foundation bolt. @ 4nos. as per site requirement.

Fabrication of MS Base Frame made from MS Chanel (as per site requirement) cross support and also fixing with MS vertical support U channel the foundation bolt to absorb the vibration and 4nos drilling as per existing site required.

Fixing of MS foundation bolts as in pocket by proper welding to MS jaal of RCC with proper support etc. @ 4nos. and Filing of Civil material of CC in ratio 1:2:4 for grip of foundation bolt in CC structure.

Fixing of MS Base frame made out of MS channel on the CC foundation and tightening the foundation nut and bolt. With the help of heavy manual labour and tripod with all tools and tackles required to complete the job.

Fabrication and supply of M.S. Covering Jaal with M.S. Angle iron size 50x50x6mm with MS square Bar 20x20 mm size as per site requirement. The work including cutting, welding and making the MS Jaal for covering circular sewage tank of 8 ft dia. The MS square Bar should be welded at a 50 mm space from other square Bar and duly support at the bottom. The frame will be duly painted with enamel paint after using red oxide metal primer. Fixing the fabricated MS covering Jaal on the top of sewage circular tank by C:C material and fasteners as per site requirement.

Fabrication and supply of M.S. Covering Jaal with M.S. Angle iron size 50x50x6mm with MS square Bar 20x20 mm size as per site requirement. The work including cutting, welding and making the MS Jaal for covering Rectangular sewage tank of10ft x 4.6 ft. The MS square Bar should be welded at a 50 mm space from other square Bar and duly support at the bottom, also making the provision for suction line of Pump-sets. The frame duly painted with enamel paint after using red oxide metal primer. Fixing the fabricated MS covering Jaal on the top of sewage circular tank by C:C material and fasteners as per site requirement.

Fabrication and supply of M.S. Covering Jaal with M.S. Angle iron size 50x50x6mm with MS square Bar 20x20 mm size as per site requirement. The work including cutting, welding and making the MS Jaal for covering Rectangular sewage tank of 5ft x 4.6 ft. The MS square Bar should be welded at a 50 mm space from other square Bar and duly support at the bottom. The frame duly painted with enamel paint after using red oxide metal primer. Fixing the fabricated MS covering Jaal on the top of sewage circular tank by C:C material and fasteners as per site requirement.

Strengthening of MS Shed structure for the Pump-sets by replacing the 100 mm dia. MS pipe by cutting, welding and grouting the MS pipe with C:C material upto the depth of minimum 3ft from the ground level and welding the square MS plate at the top of MS pipe for giving support to the Shed MS structure for bearing proper load. The work includes arranging all T&P items required to complete the Job at site and painting the complete inner MS structure of shed with enamel paint.

Installation and fixing of the existing pump and motor(both Pump-sets) on the base frame including couple the pump and motor with new tyre as required, jointing the pump with suction Sluice valve/ delivery line with double flanged bends as per site requirement. Fixing of New Valves of Suction & delivery sides, Non return Valves, with nut & bolts, packing, etc. as required to complete the job. The job also include the laying of existing cable, making connection the motor from starter/panel etc. i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load.

Premier Engineering Company (BID ID -1593477)