Revamping of Existing Water Supply System Melathur Pumping Station to Kallukundukarai 2.50Lakhs Ltr Capacity

Amount

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs fuel, labour and drilling bentonite and water required for drilling at site( Site will be shown by the Departmental officers) including construction of mud pit.

First Depth of 60mt ( 0.00 mt to 60.00 mt)

60.00 mt to 90.00 mt

90.00 mt to 120.00 mt

120.00 mt to 150.00 mt

150.00 mt to 180.00 mt

180.00 mt to 210.00 mt

Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the Departmental Engineer incharge

First Depth of 60mt ( 0.00 mt to 60.00 mt

60.00 mt to 90.00 mt

90.00 mt to 120.00 mt

120.00 mt to 150.00 mt

150.00 mt to 180.00 mt

180.00 mt to 210.00 mt

Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by Departmental officers and conducting yield test by 'V' notch method.

Labour Charges for inserting Casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with cement paste etc complete supplying and packing the annular space with pebbles of size and quality as approved by the Departmental officers

Supply and Delivery of 150 mm Dia of Plain and Slotted Pipe for Casing including all cost and conveyance with labour charges for erection etc Complete.

Casing pipe without Slot

Casing with Slotted pipe

Threated End Cap

Supply and delivery of Three phase of 50 LPM 175 mtr Head Submersible pumpset of Motor ISI/ISO with Three PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START as per ISI Specifications including all cost and conveyance to site etc., Complete

SUPPLYING OF SUBMERSIBLE PUMPSET WITH ISI MARK IS NO : 8034 Duty 50lpm x 175 mt head as per IS Specificatrion

SUPPLYING OF 3 phase PANEL BOARD-STAR DELTA WITH TWO LEVELGUARD as per IS specification ( 5.0 HP)

Supply and delivery of following 50 mm dia UPVC Column Pipe and GI Pipes and Other Special materials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc.,

50mm dia UPVC Column pipe

50mm G.I. Elbow

50mm G.I. union

50mm G.I. Bend

50mm Gate Valve

50mm GM N.R.V

50mm PVC MTA

160mm end PVC Cap

50mm dia GI Flange set

50mm M.S. Clamp set

Supplying and fixing of PVC insulated and sheathed 3 core 4sq.mm Flat type Copper cable cofirming to IS 694/ 1990 and including cost and conveyance of all materials to site and labour charges etc, complete as per standard specification.

Labour Charges for the Erection of 50 LPM 175 mtr Head Submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TNICN switches starter, voltmeter,Ammeter, three pilot lamps capacitor single phasing preventor, water level guard and laying and jionting the cables and twin earthing as per IE rules., complete and testing the pumpset and trail run for 10 days.

Supplying laying and jointing PVC Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete in the existing Toilet

32mm PVC.Elbow

32mm PVC. TEE

32mm PVC. End cap

20mm PVC. TEE

Supplying and fixing in position first quality and approved variety of 32mm Gun Metal Gate Valve (Heavy type) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying and fixing of 2000 Liters capacity HDPE tank with IS specification IS 10701/96

Earth work excavation and depositing on bank with an initial lead of 10m and initial lift of 2m Hard stiff clay,stiff black cotton soil, hard red earth, shales, murams, gravel, stoney earth, and earth mixed with 50% fair size boulders and hard gravelly soil -SS20B

Supply and filling the foundation and basement with m sand in layers complying with standard specification including consolidation and watering etc. complete and as directed by Departmental Engineers.

Levelling course with P.C.C 1:4:8 (one cement, four sand and eigth course aggregate) using 40 mm H.B.G stone including mixing concrete, laying, curing and compacting of concrete etc., complete and as directed by the Departmental Engineers.

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification -

Reinforced Cement Concrete with M30 Design Mixfor the following members excluding the cost of reinforcement and fabricating, centering, shuttering andstrutting charges but including the cost of all materials, mixing, placing inposition, lifting, vibrating, finishing & curing, etc. complete.and as directedby Department Engineer.

Centering for sides and soffits of R.C.C slab of plane surface for R.C.C floor slab including strutting upto 3.3 mt height using MS sheets of size 90cmx60cm and stiffend with welded MS angle of size 25mmx25mmx3mm laid over silver oak (country wood) joists of size 10cmx6.5cm (space at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia 90cmx60cm and BG10 guage (spaced at 75cm c/c) complying with standard specification etc., complete as directed by the Departmental Engineers.

Footing Column

Column

Roof slab

Lintel & Plinth Beam

Plastering with CM 1:5(one cement and five sand) 12mm thick including cost of materials, labour charges for finishing, curing etc., complete and as directed by Department Officers.

Supplying fabricating and placing in position of RTS grills at all heights for reinforcement including cost of steel for all works and labour charges including cost of binding wire etc., complete for all RCC works and as directed by Departmental Engineers.

Finishing the top of flooring with granothatic flooring with cement concrete 1:2:4 (one cement, two sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete.

Special ceiling plastering with CM 1:3 (one cement and three sand) 10 mm thick including labour charges for mixing, finishing , curing etc., complete and as directed by Departmental Engineers.

White washing two coats using fine screened shell lime for the new plastered surface for inner and outer side of the room including the cost of materials labour charges etc., complete and as directed by Department engineers

Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Supply and Delivery Fabrication of MS doors andwindows with outer frame and shutter frame in MSangle of size 40mm x 40mm x 6 mm with MS flat25mm x 25mm x 6mm and MS sheet of 18 gaugeincluding ventilating arrangements using 20mmsquare MS rods with locking arrangements includingtwo coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets,fabrication charges, cost of hold fast andtransportation charges etc., complete

Fully panelled Double leaf - Door (1.00 x 2.10 m)

Fully panelled Double leaf - Window (without Ventilator) ( 1.20 x 0.90 m )

Weathering course with broken Brick Jelly of 20 mm size in pure slaked lime (no sand to be used) over RCC Roof slab with proportion being 32:12 1/2 for required depth of 80mm thickness over the roof slab as required well beaten with wooden beaters for giving required slope complying with standard specification etc., complete and as directed by Department Engineer

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers - Hard stiff clay, stiff black cotton, hard red earth, shales,murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly Soil.SS20B

150 MM Dia DI K7

90 mm HDPE PIPE

Supply and Delivery DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000

150mm diameter

Supply and Delivery DUCTILE IRON SPECIALS AS PER IS 9523/2000

150mm - 90 Deg D/S Bend

150mm - 45 Deg D/S Bend

150mm - 22 1/2 Deg D/S Bend

Supply & delivery of following sizes of HDPE PIPES confirming to IS 4984/2016

90 mm HDPE PE100PN6

Supply, Delivery and fixing of DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage, inside and outside color Blue including Flange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation charges and stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating PN 10/16.

150mm diameter

100 mm Valve

Manufacture, Supply and Delivery of Tamper proof C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000 with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float shall be made of Polytetrafluroethylene/ Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber and as amended from time to time and suitable for water supply main including loading freight, transit, unloading and stacking them at site etc. complete

50 mm Valve

Supply and delivery of DI D/F specials of conforming to IS 9523/2000 specifications at site of work including all taxes, duties, loading, transportation, unloading, insurance etc., complete and as directed by Engineer incharge.

150 mm Flanged Socket Tail Piece

150 mm Flanged Spigot Tail Piece

150 mm DUCKFOOT BEND

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow.The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorriosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”.Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window.The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished.

100mm diameter

150mm diameter

Lowering of DI pipes and specials carefully into the trench and laying to proper grade and alignment including labour charges, incidental and operational charges etc complete as per standard specifications and as directed by the Departmental Engineer.

150mm diameter

Lowering HDPE PE100PN6 pipes and specials to trench and laying to proper grade and alignment and as directed by the Departmental Engineer

90 mm HDPE PE100PN6

Cutting of CI and DI pipes and specials true to axis and filing smoothly and finishing the ends complete, with / without water in the pipe including labour charges, incidental and operational charges etc complete as per standard specifications and as directed by Departmental Engineer.

150mm diameter

Cutting the HDPE pipes true to axis and finishing the ends complete.

90 mm HDPE PE100PN6

Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials)

150mm diameter

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supplyarrangements etc., complete as per directed by Departmental Engineers.

90 mm HDPE PE100PN6

Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test,excluding the cost of pipes but including other incidential and operational charges etc.,complete for the following diametres of pipes.

150mm diameter

90 mm HDPE PE100PN6

Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department engineers

Supply , delivery and fixing of HDPE specials (lining and coated) at site etc., complete as directed by Engineer in charge.

90 MM dia HDPE Equal

90 MM dia HDPE 90 Bend

Construction of Thrust blocks using M20 grade Concrete using 20 mm Blue granite jelly for plain cement concrete, including necessary excavation,sand filling, M20 grade concrete and shuutering charges for all the sides and providing skin reinforcement for all sides using 12mm @200 mm c/c asperdrawing etc all complete ( The rate is inclusive of cost of reinforcement rods )

150mm - 90 Deg D/S Bend

150mm - 45 Deg D/S Bend

150mm - 22 1/2 Deg D/S Bend

Refilling with excavated sand complying with standardspecification for filling in foundation and basement

150 MM Dia DI K7

90 mm HDPE PE100PN6

Construction of Valve Chamber

150mm diameter

100 mm Valve

50 mm Valve

Supplying and filling in foundation and basement with filling sand in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

150mm diameter

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Labour for cutting open road for laying water mains orsewer

BT Cutting

CC Cutting

DI Flow rate Limit control Valve (PN10/16) with the function to limit the flow rate to a set point. In case the downstream demand increases beyond the set limit, the valve closes down to bring the flow back to set limit. The valve shall have an orifice plate and the orifice diameter is designed based on the set point as per the requirement and installed downstream of the control valve.“Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Flow rate Limit Control valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - toprevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved. The EPDM rubber & Epoxy coating (EP-P) should be approved by W270. (EP-P)/ WRAS & NSF.” Pilot valve system having Stainless Steel / Brass fittings with spring of stainless steel 304 as per standard parts according to DIN EN 12 266-1, orifice plate shall be as per the set point of flow rate and all the external control tubing of SS 304 / Copper/ reinforced plastic rated PN16 Tightness to DIN EN 12 266-1, leakage rate A (or) equivalent and the needle valve/ speed control device should be provided to vary opening speed of the main diaphragm with self-cleaning filter to avoid possibility of dirt build up inside the control tubing.

150 mm diameter

Excavating of driving pit and receiving pit of size 3.00m (length) x 3.50m (breadth), upto 5m depth in all soil strata including shoring and strutting using 6mm tk MS Plate of size 3.50m x 3.50m usable for 20 operations and providing 16mm thickness MS plate of size 3.00m x 3.50m with 100mm x100mm x 12mm angles of 4m length for holding the MS plates for Thrust arrangements to receive the impacts during pushing operation of encasing pipe. Lowering the following size of MS encasing pipe by using Contractor’s crane and machineries and jointing MS pipes by welding, across the National Highways/State Highways/ Railways/Canal crossing etc and driving the horizontal bore by pushing / jacking method (trenchless technology method) using contractor’s machineries such as cranes, jacks, jacking materials, generator, welding machineries, compressor, jack hammer and other equipments etc. without interfering and causing any hindrance to the movement of traffic or any other vehicles, without any disturbances to the railway/road/canal formation etc. including bailing / pumping of water where ever necessary without affecting any installation like water supply pipeline/telephone cable, electric cables etc. passing nearby area and scooping the earth inside the pipes and pit and depositing the surplus earth in a convenient place and leveling the site after completion of entire work as directed by TWAD Engineers. The rate includes the cost of driving pit, thrust bed/wall and receiving pit to the depth of om to 5m excluding the cost of MS pipes.

For 200mm dia MS encasing pipe for various thickness

Supply and delivery of clear water vertical wet type submersible pumpset suitable for not less than 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. Rated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

190.8 lpm against a total head of 204 m

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to three phase, 50Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation with lifting arrangement as directed Engineer Incharge

503.4 lpm against a total head of 55 m

15 HP or Suitable capacity

12.5 HP or Suitable capacity

Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete.

Supplying and fixing of following capacity Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete as per TANGEDCO which includes LT meter panel board

63 Amps - Borewell

63 Amps - Pump Room

Supplying and fixing of following capacity Triple Pole SFU with fuses on suitable angle iron frame with earth connection only.

63 Amps - Borewell

63 Amps - Pump Room

Capacity of M.V. Panel - 63 Amps - 63 A FP MCCB - Incommer

63A TPN MCCB 10 kA - 2 nos for pumps

63A TP MCB 10 kA - 2 nos for Pump cap.

63/32 A TPN MCB 10kA (for LDB & Spare - 2nos)

Supplying and laying following LTUG Armoured Aluminium cables in a trench to be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good as directed.

DO - 3 ½ core 50 sq.mm. for PS(Incomer)

DO - 3 core 4 sq.mm - Panel to Starter (PS)

DO - 3 core 4 sq.mm - Starter to Junction Box (PS)

DO - 4 core 10 sq.mm. for Incomer.

DO - 4 core 4 sq.mm. for Lighting

Supplying and laying following LTUG Copper Flat cables in a trench to be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good as directed.

DO - 3 core 6 sq.mm - for pump

Supplying and fixing of cable gland and termination with Aluminium cable lugs for following PVC UG cable and with earth connection

DO - 3 ½ core 50 sq.mm.

DO - 3 core 4 sq.mm

DO - 4 core 10 sq.mm

DO - 4 core 4 sq.mm

Supplying and fixing of cable gland and termination with copper cable lugs for following PVC UG cable and with earth connection

DO - 3 core 6 sq.mm

Supply, delivery and erection of Three Phase 4 way 32 Amps, 10kA LDB with the following:1 No of 40 A FP isolator for incoming supply3 Nos. of 16A, DP RCCB3 Nos. of 16A, SP MCB1 No of 16A, DP MCB3 Nos of 6A, DP MCBin sheet steel enclosure fitted with busbars and neutral links and suitable angle iron frame works with provision for earthing etc. complete.

Run of 2 of 2.5 sq mm PVC unsheathed copper single core cable in PVC pipe for mains with continuous earth connection by 14 SWG wire From the MCB DB to the Switch boards in office, store,and 16A power socket.

Wiring with 2.5 sq mm PVC insulated single core copper cables of 650 V Grade on suitable rigid PVC pipe on wall and ceiling with PVC accessories, with MS switch box covered with 3 mm thick hylam sheet with continous earth wire connection of 14 SWG TC wire.

Light points

Fan Points

Supply and installation of 240 V - 1 x 20 W LED TL fitting box type with enamelled reflector complete with all accessories - choke, starter, tube, etc. suitable for wall mounting or roof mounting on conduit tube.

Supplying and fixing of 18" sweep AC exhaust fan complete including providing necessary opening in the wall.

Supply and fixing of 48" sweep AC ceiling fan complete with regulator with lm down rod (stem pipe) including supplying and fixing of fan clamp with side plates and cross arms

Earthing as per ISI specifications with necessary masonary work.

Supply, conveying and fixing GI specials as per the latest revision of IS 1239 including with ISI markings on it including earthwork excavation, lowering into the trenches, aligning, refilling the trenches with excavated soil, watering and ramming to consolidation, etc.

50 mm G.I Elbow

50 mm GI Coupling

50 mm GI Union

50 mmMS Clamp Set

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

7.5HP to 20HP

Supply, conveying and fixing following GI pipes as per latest revision of IS 1239 with ISI markings

50 mm G.I pipe

Supplying, delivery and installation at site, conveying and fixing the GM valves as per IS 5154 with ISI marking including loading, transportation charges and stacking etc complete as per specifications

50mm GM valve

Supplying, delivery and installation at site, conveying and fixing the GM Reflux valves as per IS 5154 with ISI marking including loading, transportation charges and stacking etc complete as per specifications

50 mm dia GM Reflux valve

Supplying, delivery and installation at site, conveying and fixing the CI sluice valves as per IS 14846/2000 PN 1 with ISI marking including loading, transportation charges and stacking etc complete as per specifications

150mm Sluice valve

Supplying, delivery and installation at site, conveying and fixing the CI D/F Reflux valves as per IS 5312/Part I /84 with Bye-pass arrangements with ISI marking including loading, transportation charges and stacking etc complete as per specifications

150 mm dia CI non-return valve

Supplying, delivery and installation at site, conveying and fixing the CI double air valve as per IS14845/2000 with ISI marking including loading, transportation charges and stacking etc complete as per specifications

100mm Double Air valve

House Service Connection HSC Connection - 20 mm - Providing House service connection with MDPE 20mm pipe (supply, lowering, jointing & testing), electrofusion tapping saddle PE 80 blue, PN 12.5 with female threaded metal insert of SS 304, Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded to suit the corresponding bore sizes of 15mm dia size (1/2"), Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304, Poly propylene 90 Degree Compression elbow with compression joint at both ends, Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 and protection box of size 20cm x 30cm for fixing of Water Meter all as per standard including road cutting, replacement of utilities providing house service connection, refilling, retoration of roads/drains testing etc complete with materials and specification as instructed by department officers.

RAJU RETHINAVEL (BID ID -1103041)