REPAIR / REPLACEMENT OF DAMAGED ROOM ALMIRAH, WATER STAGING AND CONNECTED ITEMS IN DSTV UNDER THE AOR OF AGE B/R I OF GE HISAR AT HISAR MIL STN

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete, all as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each.

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good complete all as specified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for cement concrete 1:2:4 type B0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

S&F cupboards/wardrobes, factory made, frame shall be of 1.25mm thick pressed steel with PBI sheet of size 90x70mm, shutter shall made out of 1mm thick pressed steel with 06 Nos 100mm long 3.15mm thick steel hinges, standard pattern rim lock with complete locking arrangement including 12mm vertical rod shall be provided (brass mortice lock, vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate and two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with minimum 6 Nos 12mm dia mild steel bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original with CM (1:4) or PCC (1:2:4) type B0 complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber or iron frame work as in cupboard shutters complete all as specified and as directed.

S&F 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber or iron frame work including suitable size PVC fillets to cover the front edge of board and suitable size of wooden cleats fixed as in cupboard shelves complete all as specified and as directed.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised (ISI marked) complete all as specified.

S&F hasp and staple of size 100mm aluminium anodized safety type with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F Magnet door catcher complete all as specified.

S&F in repairs butt hinges of size 100mm medium weight, cold rolled mild steel ISI marked, including taking down shutter and re-fixing the same in position with door frame including necessary cutting, welding to existing steel door frame and necessary carpentry work for proper functioning of wooden door shutter complete all as specified.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth with using extra cement complete all as specified & as directed.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

M&L for preparing the old decorated plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying two coats of cement base paint of approved shade/tint on wall surface to give uniform and smooth surface etc complete all as specified and as directed.

Taking up or down 15mm bore steel / composite /UPVC tubing and connection from any position concealed / exposed incl cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel / composite /UPVC tubing and connection from any position concealed / exposed incl cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25mm bore steel / composite /UPVC tubing and connection from any position concealed / exposed incl cleaning for refixing or removal to store complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings / connections fixed with MS clamps / clips and necessary screwing as required and fixed with or without concealed to walls, ceilings or laid in floors all as specified & as directed.

Fixing only GI water tubing 15 mm bore, medium grade, with & & including all fittings / connections fixed with MS clamps / clips and necessary screwing as required and fixed with or without concealed to walls, ceilings or laid in floors all as specified & as directed. Notes :- (i) Old serviceable water tubing retrieved from serial item No. 22.00 here-in-before shall be used. (ii) Quoted rate shall be deemed to include cost of GI fittings (ISI marked). Old fittings shall not be used.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings / connections fixed with MS clamps / clips and necessary screwing as required and fixed with or without concealed to walls, ceilings or laid in floors all as specified & as directed.

Fixing only GI water tubing 20 mm bore, medium grade, with & & including all fittings / connections fixed with MS clamps / clips and necessary screwing as required and fixed with or without concealed to walls, ceilings or laid in floors all as specified & as directed. Notes :- (i) Old serviceable water tubing retrieved from serial item No. 23.00 here-in-before shall be used. (ii) Quoted rate shall be deemed to include cost of GI fittings (ISI marked). Old fittings shall not be used.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings / connections fixed with MS clamps / clips and necessary screwing as required and fixed with or without concealed to walls, ceilings or laid in floors all as specified & as directed.

Taking down and re-fixing of old 15-25mm dia composite water tubing with all / connections & MS clamp & clip and necessary screwing as required in new or old position and fixed to walls and ceilings or laid in floors all as specified & as directed. Notes :- (i) Joints of composite water tubing to be repaired with soilicon gel, M-seal and other suitable method as directed by Engineer-in-charge. (ii) Quoted rate shall be deemed to include the all M&L including taking down and re-fixing of composite pipe in old or new position as required at site.

Cleaning and removing all scale and dirt, etc, from tanks exc 250 litres and not exc 500 litres and from mouths of circulating pipes, etc. complete all as specified and directed.

Disconnecting existing tanks, of capacity exc 250 ltrs and not exc 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note :- Leakage of PVC water tanks shall be repaired with silicon gel, M-seal, and other suitable method as directed by Engineer-in-charge and cost thereof shall deemed included in quoted rates.

Dismantling old unserviceable PVC water tank capacity exc 250 ltr and not exc 500 ltrs & removal from site etc complete all as specified and directed.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs 20mm dia nipple suitable for PVC tanks (minimum weight 45 gms) complete all as specified and as directed.

S&F in repairs 25mm dia nipple suitable for PVC tanks (minimum weight 65 gms) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fitting and accessories) complete all as specified.

S&F 40mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified.

S&F 40mm bore PVC (SWR) bend with access door all as specified & as directed.

S&F PVC (SWR) reducers (75x75x40mm) all as specified & as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls complete all as specified.

S&F 110mm bore PVC (SWR) bend with access door all as specified & as directed.

S&F 75mm bore PVC (SWR) bend with access door all as specified & as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed.

Fixing only cast iron pipe of size 75mm fixed to wall with necessary fitting / connection & MS clamps as required in new or old position complete all as specified and directed. Note :- Existing CI pipe & fitting shall be used for this item and fitting if required to be replaced with new one, the cost of same shall deemed included in quoted rates.

Fixing only cast iron pipe of size 100mm fixed to wall with necessary fitting / connection & MS clamps as required in new or old position complete all as specified and directed. Note :- Existing CI pipe & fitting shall be used for this item and fitting if required to be replaced with new one, the cost of same shall deemed included in quoted rates.

m/s Rajesh Kumar

Puja Traders

Shiva Constructin Co.

M/S D.N Choudhary