Providing EI and Fans, LED Lighting and other connected works for Conference Hall at 2nd floor, BSNL Bhavan, Adarshnagar, Hyderabad

Amount

Replacement of existing CFL fitting with 36 watts recess type LED fitting of size 2' x 2' suitable for operation on 230volts, 50Hz, AC supply including providing chain arrangement for hanging the fitting etc., making good the damages done to the false ceiling, interconnections etc., as required. M/s Crompton/Philips/SS make

Supplying and fixing 20/18W 4' LED Patti type fitting suitable for operation on 240V, 50Hz, AC supplying including interconnections, testing etc., as reqd.

Replacement of existing fitting with 6 watts circular surface/recess LED fitting suitable for operation on 230volts, 50Hz AC supply for Emergency lighting from UPS, including providing interconnections, making good the damages done to the false ceiling etc., as required.

supplying and fixing of MS box on the existing cable tray of size 100mm x 100mm x 60mm deep along with 5A 4way wago connector, suitable for operation on 230volts AC supply, including providing inter-connections, including cutting welding painting the box with red oxide and approved colour paint etc., as required.

Supplying and fixing following way, horizonal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required (But without MCB/RCCBIsolator) a) 6 way (4+18), Double Door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc., as required (But without MCB/RCCB/Isolator) a) 8 way, Double Door (Emergency Lights)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

b) Single pole and neutral

Supplying and fixing following rating, four pole, 415V Isolator in the existing MCB DB complete with connections, testing and commissioning etc., as reqd a) 63A

Supplying and fixing of adaptor box made of 16 SWG MS sheet including cutting welding painting with red oxide and approved colour powder coating, suitable to accommodate loop wires near DB, contactor etc., as required

Supplying and fixing of 2 pole contactor of AC3 rating of 9A suitable for operation on 230volts AC, 50Hz AC supply, along with auxiallary contacts, din rail for mounting the same, providing interconnections etc., as required. (M/s L&T make MNX 9-2P or ss make)

Supplying and Laying of 3½ X 25 sq.mm Aluminum Armored XLPE insulated and PVC sheathed power cable of 1.1 KV grade on existing cable tray / on wall etc., complete as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ X 25 sq. mm (28mm)

b) 3 x 1.5 Sqmm

c) 3 x 2.5 Sqmm

Providing and fixing of 8SWG GI wire along with the existing power cable including cutting, interconnections, etc., as reqd.

Supplying of following size of copper cable, PVC sheathed PVC insulated GI wire braided (flexible armouring) of 1.1kV grade suitable for operation on 230volts single phase AC supply of 50Hz, including laying on the cable on the existing cable tray, providing clamps, nuts and bolts, washers, cable tags where ever required etc., as required., a) 3 x 1.5 Sqmm (for light control)

b) 3 x 2.5 Sqmm (for power plugs)

Replacement of wall mounting fans with light duty wall mounted fan of size 16" suitable for operation on 230Volts 50Hz, AC supply including providing interconnections etc., as required. M/s Almonard/Cromption/Havells or ss make

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, inclduing providing and fixing 5 pin 5/6A modular socket outlet and 5/6A modular switch, connections etc.,as reqd

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, inclduing providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16A modular switch, connections etc.,as reqd

Removing of old light fittings, cables, power plugs and other Electrical accessories including placing the removed material in a space within the premisis specified by the building incharge etc., as required.

AMBICA ELECTRICALS (BID ID -863927)