MISC REPAIRS OF WOODEN FURNITURE INCLUDING CANNING AND REPAIR TO TABLES, CHAIRS, ETC., REPAIR TO STEEL FURNITURE, GI CHARPOY, MISC TP FURNITURE AND PAINTING OF STEEL FURNITURE AT AFS UNDER GE (AF) JORHAT

Amount

TABLE DINING 06 PERSONS (DRG NO. FD-273) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Dining 06 Pers and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown on drawing of the followings:-

Leg made out of 2nd class hard wood.

Table top of size 1500x900x18mm thick with prelaminated particle board with around 4mm thick 2nd class hard wood edging.

Side rail long of 2nd class hard wood.

Side rail short of 2nd class hard wood.

TABLE WRITING (DRG NO. FD 275) Removing/taking out carefully following old unserviceable worn out/damaged/broken components/parts of the wooden furniture and M&L as required of the same with new materials/components/parts of same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed listed below and all as shown and specified on drawings:-

Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Door with 18mm thick plywood BWR grade with 1mm thick laminated sheet fixed with adhesive and around 4mm thick second class hard wood edging.

Drawer all as specified as per drawing.

Table Top of size 1145x600x18mm thick prelaminated particle board with 4 mm thick around second class hard wood edging.

Side rail long of second class hard wood.

Side rail short of second class hard wood.

TABLE BED SIDE (DRG NO. FD 276) Removing/taking out carefully following old unserviceable worn out/damaged/broken components/parts of the wooden furniture and M&L as required of the same with new materials/components/parts of same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed listed below and all as shown and specified on drawings:-

Side of the table bed side with 18mm thick pre-laminated particle board having teak veneer face on one side and commercial on other side.

Top with 18mm thick particle board having teak veneer face on top cut to size and shape.

Back with 6mm thick commercial plywood.

Shelf with 12mm thick particle board.

CHAIR DINING JCOs/ORs (DRG NO. FD/MAP-II/05)

Removing the old PVC seat and S&F with new seat of chair dining JCO's/OR's as per existing shape and size.

Front Leg made out of second class hard wood.

Rear Leg made out of second class hard wood.

Stiffner made out of second class hard wood.

Front / side rail with necessary screws.

TABLE 900 x 600MM WITH DRAWER (DRG NO. FD-283) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table 900x600mm with drawer and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished with finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table Top 900x600mm with 18mm thick prelaminated particle board and around 4mm thick 2nd class hard wood edging.

Legs made out of 2nd class hard wood.

Side Long Rail made of 2nd class hard wood.

Side Short Rail made of 2nd class hard wood.

Stiffener 25x40mm made out of 2nd class hard wood.

Drawer all as specified and shown on drawing.

CHAIR DINING (DRG NO. FD-279) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair dining and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 2nd class hard wood

Rear Leg made out of 2nd class hard wood

Stiffner made out of 2nd class hard wood

Front/Side Rail with necessary holes for canning made out of 2nd class hard wood.

CHAIR WRITING (DRG NO. FD-285) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair Writing and M&L as required of the same (as listed below) with new materials/ components of the same size, shape and fixing complete including polished and finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Front Leg made out of 2nd class hard wood

Rear Leg made out of 2nd class hard wood

Stiffner made out of 2nd class hard wood

Front/Side Rail with necessary holes for canning made out of 2nd class hard wood.

Arm Rest made out of 2nd class hard wood.

M&L for re-canning with new plastic cane, 2mm wide oval type in white colour and border with 4mm wide complete all as specified and as directed.

TABLE 900 x 900MM WITHOUT DRAWER (DRG NO. FD-291) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table 900x600mm with drawer and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished with finish to receive complete all as specified and as directed all as shown and as specified on drawing of the followings:-

Table Top 900x900mm with 18mm thick prelaminated particle board and around 4mm thick 2nd class hard wood edging.

Legs made out of 2nd class hard wood.

Side Long Rail made of 2nd class hard wood.

Side Short Rail made of 2nd class hard wood.

TABLE DRESSING LADIES (DRG NO. FD-252) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Dressing Ladies and M&L as required of the same (as listed below) with new materials/components of the same size, shape and fixing complete including polished to finish to receive complete all as shown and as specified and as specified on drawing and as diorected of the followings:-

Looking mirror with frame and 8mm thick plywood BWR grade on back of frame mirror of size 1220x380x5mm thick and applying one or more coats of french polish to the frame after preparation of surfaces.

Back with 12mm thick ply commercial type.

4mm thick ply teak face.

Drawer all as existing and specified size.

TEAPOY (DRG NO. FD 278) Removing/taking out carefully following old unserviceable worn out/damaged/broken components/parts of the wooden furniture and M&L as required of the same with new materials/components/parts of same size, shape and fixing complete including polished to finish to receive complete all as specified and as directed listed below and all as shown and specified on drawings:-

Table Top 600x450mm, 18 mm thick pre-laminated particle board with around 4mm thick second class hard wood edging.

Leg made out of second class hard wood

Side rail long of second class hard wood

Side rail short of second class hard wood

SOFA SET 04/05 SEATER (DRG NO. FD-281) Removing/taking out old unserviceable foam cushion with cover fom sofa set single seater and replacement with new cushion in sofa of size 530x500mm, 100mm thick, 40mm density and covered with new tepastry cloth superior quality approved from GE complete all as specified and as directed as shown in drawings.

TABLE CENTRE (DRG NO. FD-274) Removing/taking out carefully old unserviceable worn out/broken/damaged parts of Table Centre and M&L as required of the same (as listed below) with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings :-

Table top of size 900x450x18mm thick prelaminated particle board with around 4mm thick with 2nd class hard wood edging.

Leg made out of 2nd class hard wood

Side rail long of 2nd class hard wood

Side rail short of 2nd class hard wood

CHAIR EASY (DRG NO. FD-229) Removing/taking out carefully old unserviceable worn out/broken/damaged parts chair easy and M&L with 2nd class hard wood as required of the same with new materials/components of the same as existing size, shape and fixing complete including polished to finish to receive complete all as shown and as specified on drawing and as directed of the followings:-

Front Legs made out of 2nd class hardwood

Rear Legs made out of 2nd class hardwood

Front/side rail with necessary holes for canning made out of 2nd class hardwood.

Arm rest made out of 2nd class hardwood.

POLISHING Removing of old fade out polished by polish remover/ scrapper or by caustic soda or by any other means without damaging surfaces of furniture as listed below, making the surface smooth and free from dust and applying high class french spray polish till glossy/shine finish complete all as specified and as directed of the followings:-

Chair Easy (Drg No. FD-17 and FD-229)

Table Centre (Drg No. FD-274)

Table writing (Drg No. FD-275)

Chair Dining JCO/ORs (Drg No. FD/MAP-II/05)

Table office clerk wooden (Drg No. FD-84M)

Table Office Officer Wooden (Drg No. FD-84M)

Table of size 900x600x760 mm without drawer (Drg No. FD/42M)

Table of size 900x600x760 mm with drawer (Drg No. FD-283)

Chair Dining cushioned (Drg No. FD/MAP-II/04)

Table Bed Side (Drg No. FD 276)

Table Dining 06 Pers (Drg No. FD-273)

Table Dining 04 Pers (Drg No. FD/E6/MAP-II/03)

Teapoy (Drg No. FD-278)

Chair Dining CB (Drg No. FD-279)

Chair Writing (Drg No. FD-280)

Table Dressing Ladies (Drg No. FD-378)

Table 3' x 3'

ALMIRAH LARGE STEEL (DRG NO. FD-1031)

S&F Leg of Almirah large steel made out of 1mm thick mild steel sheet as shown on drawing and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with a spray painting compressure after and including surface preparation and removing unserviceable legs complete all as shown on drawing and as directed.

All as per Serial item No. 16.01 here-in-before but shelves of almirah large steel

All as per Serial item No. 16.01 here-in-before but door of almirah large steel.

S&F Locking device including locking rods for almirah large steel including removing of unserviceable locking device complete all as shown on drawing and as directed.

S&F Handle 150 mm long, chromium plated for Almirah Large steel including removing of unservceable hande complete all as shown on drawing and as directed.

S&F Lock universal type 6 levber made out of mild steel, powder coated for Almirah Large steel including removing of unserviceable lock complete all as shown on drawing and as directed.

S&F butt hinges of existing Almirah Large steel complete all as shown on drawing and as directed.

ALMIRAH MEDIUM STEEL (DRG NO. FD-1032)

All as per Serial item No. 16.01 here-in-before but leg of almirah medium steel.

All as per Serial item No. 16.02 here-in-before but shleves of almirah medium steel.

All as per Serial item No. 16.03 here-in-before but door of almirah medium steel.

All as per Serial item No. 16.04 here-in-before but locking device of almirah medium steel.

All as per Serial item No. 16.05 here-in-before but handle of almirah medium steel.

All as per Serial item No. 16.06 here-in-before but lock for almirah medium steel.

S&F of butt hinges of existing almirah medium steel complete all as shown on drawing and as directed.

LOCKER BED SIDE STEEL (DRG NO. FD-1029)

All as per Serial item No. 16.01 here-in-before but leg of locker bed side steel.

All as per Serial item No. 16.02 here-in-before but shleves of Locker bed side steel.

All as per Serial item No. 16.03 here-in-before but door of locker bed side Steel.

S&F handle 100mm long of mild steel chromium plated for locker bed side steel including removing of old unserviceable handle complete all as shown on drawing and as directed.

S&F hasp and staple 75mm long mild steel chromium plated for locker bed side steel including removing of unserviceable hasp and staple complete all as shown on drawing and as directed.

S&F butt hinges of existing Locker Bed Side steel complete all as shown on drawing and as directed.

TABLE CLERK STEEL (DRG NO. FD-1004)

S&F drawer made out of 1m thick mild steel with all the necessary cutting, moulding, make hole, welding, etc. and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with spray painting compressure after surface preparation by removing drawer complete all as shown on drawing and as directed.

S&F Lock 3 way, 6 lever for table clerk steel including removing unserviceable drawer lock complete all as shown on drawing and as specified and as directed.

S&F PVC recess handle of best quality including fixing with self tapping screw as shown in drawing,including removing unserviceable handle complete all as shown on drawing and as directed.

S&F hard rubber shoe including removing unserviceable rubber shoe complete as shown in drawing and as directed.

S&F as in repair top of table clerks steel 18mm thick pre-laminated particle board with 4mm thick around 2nd class hard wood edging all as specified all as shown on drawing and as directed.

TABLE OFFICER STEEL (DRG NO. FD-1003)

All as per Serial item No. 19.01 here-in-before but drawer.

S&F Lock 3 way, 6 lever for table officers steel including removing unserviceable drawer lock complete all as shown on drawing and as directed.

S&F PVC recess handle of best quality including fixing with self tappig screw as shown in drawing, including removing unserviceable hande complete all as specified all as shown on drawing and as directe.

S&F hard rubber shoe 25mmx25mm best quality, including removing unserviceable rubber shoe complete all as shown on drawing and as directed.

S&F as in repairs top of table officers steel 18mm thick pre-laminated particle board with 4mm thick around 2nd class hard wood edging complete all as specified all as shown on drawing and as directed.

RACK SHOE STEEL (DRG NO. FD/E6/MAP/02(R)

S&F frame of rack shoe steel as existing made out of 25mm dia mild steel pipe with all necessary workmanship like cutting, bending, making holes, welding, etc. including removing of unserviceable frame and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F shelves of rack shoe steel with all necessary workmanship like cutting, bending, making holes, welding, etc. including removing of unserviceable shelves and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F hard plastic shoe in repairs complete all as specified and all as shown on drawing and as directed.

CHAIR SCHOOL WITH HAND BOARD (DRG NO. FD/E6/MAP/05)

S&F writing pad made out of 18mm thick prelaminated particle board top openable with PVC edging (hinged on RHS screwed to 25mm dia hollow steel pipe inserted in 20mm MS rod welded to frame) including removing unserviceable top complete all as specified and shown on drawing and as directed.

S&F one piece PVC back and seat (blow plast or equivalent) complete all as specified and all as shown on drawing and as directed.

S&F frame of chair school as existing with hand board made out of 25mm dia mild steel pipe with all necessary workmanship like cutting, bending, making holes and welding, etc. including removing of unserviceable frame and applying two coats of synthetic enamal paint black with spray compressure rest after and including surface preparation complete all as specified and all as shown on drawing and as directed.

S&F hard plastic shoe in repair complete all as specified and all as shown on drawing and as directed.

CHAIR CB STEEL WITHOUT ARM [DRG NO. FD-75(M)]

S&F seat of chair CB without arm made out of 2nd class hard wood including weaving of plastic cane, 2mm wide, bordered with 3mm, half round type white Godrej pattern, fitting shelf on frame with self tapping screw neatly. All wooden exposed parts shall be french polished up to a glossy finish or paint enamel black colour complete all as shown and specified on drawing and as directed.

All as per Serial item No. 23.01 above but back of chiar CB steel without arm.

CHAIR CB STEEL WITH ARM (DRG NO. FD-75(M)

All as per Serial item No. 23.01 here-in-before but for seat of chair CB steel with arm.

All as per Serial item No. 23.01 here-in-before but for back of chair CB steel with arm.

S&F handle for Chair CB steel with arm made out of 2nd class hard wood and applying french polish upto glossy finish or black paint complete all as shown and as specified on drawing and as directed.

CHAIR VERANDAH [DRG NO. FD-259]

Removing of old unserviceable plastic cane from seat and back of chair verandah and recanning of seat and back with 4 mm wide half round plastic cane of best quality complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

S&F of leg of chair verandah made out of 20mm dia mild steel pipe with all necessary workmanship like cutting bending making holes and welding including removing of unserviceable leg and apply two coat of synthetic enamal paint black with spray compressure rest complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

S&F hard plastic shoe in repair complete all as specified and all as shown on drawing and as directed by Engr-in-charge.

CHAIR WRITING MAP (DRG NO. FD/E6/MAP/12)

S&F new tapestry cloth of superior quality for seat and back of chair writing MAP duly stritched as per existing shape including removing old unserviceable tapestry cloth complete all as shown and as specified on drawing and as directed.

GI CHARPOY (DRG NO. FD-220)

S&F GI charpoy long rail of GI Pipe, 32mm bore (dia), medium grade duly threaded both ends upto the required length and fitted to frame of charpoy including taking out old existing partially damaged long rail from 3 way elbow by unscrewing complete all as shown and as specified on drawing and as directed.

Cutting long rail (retrieved from Serial Item No. 27.01 here-in-before) to make short rail and threading both ends upto the rquired length including straightening whre required and fixing including taking out old existing partially damaged/unserviceable short rail by unscrewing from three way elbow complete all as shown and as specified and as directed.

Cutting short rail (retrieved from Serial Item No. 27.01 here-in-before) to make legs and threading one ends including straightening whre required and fixing including providing 2 Nos mild steel flat iron of size 20x3mm clamps and providing mild steel flat iron or washer to bottom of mild steel clamps, welded to leg and appying one coat of black paint over and including one coat of red oxide zinc chrome primer including taking out old damaged/unserviceable legs by unscrewing from three way elbow complete all as shown and as specified on drawing and as directed.

S&F GI elbow 3-way, ISI marked suitable for GI pipe 32mm bore (dia) for GI charpoy including taking out old unserviceable GI elbow from the frame complete all as shown and as specified on drawing and as directed.

S&F GI check nut, ISI marked suitable for GI pipe 32mm bore (dia) for GI charpoy including taking out old unserviceable GI check nut from the frame complete all as shown and as specified on drawing and as directed.

S&F MS flat iron 6mm thick to charpoy GI pipe with nut and washer complete all as shown and as specified and on drawing and as directed.

S&F as in repairs plywood for charpoy GI pipe with 8 numbers of screw 65mm with nut and washer complete all as shown and as specified on drawing and as directed.

CHAIR EXECUTIVE REVOLVING LONG BACK TP

S&F PVC pedestal with castors (wheel) of chair executive revolving long back complete all as shown and as specified on drawing and as directed.

S&F of hydraulic piston (for height adjustment) of chair executive revolving long back complete all as shown and as specified on drawing and as directed.

S&F of castor wheel of chair execuitve revolving long back complete all as shown and as specified and on drawing and as directed.

S&F new tapestry cloth of superior quality for seat and back of chair executive revolving back duly stritched as per existing shape after and including removing old unserviceable tapestry cloth complete all as shown and as specified on drawing and as directed.

S&F PVC handles of chair executive revolving long back of existing shape and size including removing of unserviceable handle complete all as shown and as specified on drawing and as directed.

TABLE BED SIDE (MAP) [DRG NO. FD/E6/MAP/15(R)]

S&F top of table bed side (MAP) including removing of unserviceable old existing top complete all as shown as specified on drawing and as directed.

S&F left/right side table bed side (MAP) including removing old existing unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of table bed side (MAP) including removing of old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F drawer of table bed side (MAP) including removing old unserviceable one complete all as shown and as specified on drawing and as directed.

TABLE 900X600X760 MM WITH DRAWER STEEL (DRG NO. FD-1008) S&F table top of size 900x600mm with 18/19mm thick prelaminated particle board including edges of table 900x600x760mm after and including taking up/removing old unserviceable one all as shown and specified on drawing and as directed.

ALMIRAH LARGE GLAZED STEEL [DRG NO. FD-104(M) ]

S&F door glass of Almirah large glaged steel including taking down/removing old brocken glass complete all as shown and as specified on drawing and as directed.

S&F locking device of Almirah large glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of Almirah large glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

ALMIRAH MEDIUM GLAZED STEEL [DRG NO. FD-104(M)]

S&F door glass of Almirah medium glaged steel including taking down/removing old brocken glass complete all as shown and as specified on drawing and as directed.

S&F locking device of Almirah medium glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

S&F handle of Almirahmedium glaged steel including taking down/removing old unserviceable one complete all as shown and as specified on drawing and as directed.

M&L for welding point not less then 25mmx5mm of existing steel furniture as required complete all as directed.

BED HARD STEEL MAP (DRG NO. FD/E6/MAP/08(R)) S&F as in repair plywood for bed hard steel MAP with 08 numbers of screw 65mm with nut and washer complete all as shown and specified on drawing and as directed.

PAINTING OF STEEL FURNITURE M&L preparing external and internal surface of steel furnitures including de-rusting/scratching, paste putty, snading, etc. and applying two coats of synthetic enamel paint over and including one coat of red oxide primer with spray paint, 1st grade quality (as per existing colour/required colour) compressor complete all as specified and as directed of the following steel furnitures:- Note : Drg Nos are not mentioned here. Before quoting, tenderers are needs to confirmed details of furniture items.

Book Case steel

Locker Bed side steel

Rack steel enclosed back of size 1905x910x455mm

Rack six tier steel

Rack adjustable six tier of size 1905x910x455mm

Rack pigeon hole steel 18 holes of size 1905x915x540mm

Chair CB steel without arm

Chair CB steel with arm

Almirah Large steel

Almirah Medium steel

Locker six unit steel

Stool steel

Table clerk steel

Table office officer steel

Chair Verandah

Table 3' x 2' with drawer steel

Almirah Large glazed steel

Almirah Medium glazed steel

Chair school with hand board

Rack shoe steel

Bed hard steel MAP NOTE:- The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ

M/S GOSWAMI BROTHERS (BID ID -3425474)

AJOY DUTTA CHOWDHURY AND CO (BID ID -3426172)

Bidder Name

SANDHUSONS

AJOY DUTTA CHOWDHURY AND CO

M/S GOSWAMI BROTHERS