SPECIAL REPAIRS TO BLDG NO OR 20 OR MD ACCN AT 11 BIHAR SALT LAKE UNDER GE (NORTH) KOLKATA

Amount

Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises complete all as specified and as directed.

Demolition of reinforced Concrete as in Roofs, floors (other than ground floors), beams, staircases, landing, and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and as directed.

Cleaning the existing surface of concrete and reinforcements as obtained after execution of item No. 1 & 2 here in before by wire brush including scrapping & cleaning with emery paper and washing down with water as required and applying “Solvent free epoxy concrete bonding agent” as per manufacturer’s instructions on old concrete surfaces for bonding with new concrete complete all as specified and as directed.

Applying two coats of “Epoxy zinc rich primer” as protective coat to expose surface of old and new reinforcement over 10 mm dia as per manufacturer's instructions complete all as specified and as directed.

All as per item No. 4 above but reinforcement upto 10mm dia. Note for item No 3 to 4: (i) Cost of chemical i.e. Solvant free epoxy, Epoxy zinc rich primer and cement shall be measured and paid separately under appropriate item here in below. (ii) The work shall be carried out by the trained person as per manufacturer's instructions i.e. FOSROC/SIKA/ PIDILITE

Supply only epoxy zinc rich primer. Make : Nitozinc primer of FOSROC/Friazinc R of SIKA/ or equivalent in PIDILITE

Supply only Solvant free Epoxy concrete bonding agent. Make : Nitobond EP of FOSROC/Carbodur of SIKA/ or equivalent in PIDILITE

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed

Material and labour for mild steel TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed.

Material and labour for mild steel TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed. Make for item Nos. 8,9 & 10:- :- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) as in chajja, facia, railing and parapet complete all as specified and as directed.

Material and labour for providing reinforced cement concrete (1:1½: 3) type A0 (using 12.5mm graded stone aggregate) mixed with integral water proofing liquid admixture as per manufactures instructions as in columns, pillars, piers, posts and struts complete all as specified and as directed.

All as per item No. 12 above but in slab, landing, balcony and similar items.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed.

Use and waste of formwork to sides and soffits of chajja, troughs etc for rough finished concrete surfaces complete all as specified and as directed

Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

All as per item no. 21 above but other than fair faces of brickwork.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. Make for lime:- Birla white / Surya cem / Lovely cem

All as per item No. 23 above but in ceiling.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and finishing the surface even and smooth without using extra cement in floor all as specified and directed.

Material and labour for non-skid coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exceeding 0.06 Sqm but not exce 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles complete all as specified and directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

Material and labour for Glazed ceramic tiles in vertical surface area of each tiles exc 0.11 Sqm but n exc 0.15 Sqm, 7mm to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make for item Nos.27 to 29:- Kajaria / Asian Granito / Somany / Vamora Granito / Nitco / Orient

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Supply and fix in repair machine cut cudappa stone slab 20-25mm thick as in cooking platform set or embedded on 20mm thick screed bed in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded aggregate) as in pavement/plinth protection,plinth protection shall be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) surface finished fair and even complete all as specified and as directed. Make for Bitumene:- STP / Tikitar / Chosky Chemicals.

Supply and fix in repair one pieced-white wash basin without pedestal 550 X 400 (oval/square pan) a/w brackets / MS nuts and bolts for fixing; fixed with and incl 32mm dia brass CP waste coupling and connecting waste pipe etc complete all as specified and directed. Make:- Cat No. __________ of ________ / equivalent in Neycer Kermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 15mm PVC connection of length 600mm with PTMT nuts of superior quality complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Supply and fix in repair fancy type chromium plated pillar taps- 15mm bore, of cast copper alloy, with long screwed shanks & screwed for iron pipe or for connection pipe complete all as specified and directed. Makes :- Cat No. ____________ of make _________ or equivalent in Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Makes :- Cat No. ____________ of make _________ or equivalent in Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag. .

Supply and fix in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed Make:- Neycer Kermag(standard) / Hindusthan Sanitary Ware (1st quality) / Parryware (superfine) / Cera (1st quality) / classica 1st /Standard) / Johnson Pedder. / Prayag

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm cocomplete all as specified and directed. Make:- M/S Johnson Padder / Hindustan sanitary ware / Millennium / Cera / Blue Star Polymers (Speed Flow) / Commander (Water Bird) / Hindware(Sleek) / Parryware(Slimline) / Prayag

Supply and fix in repairs triple layered LLDPE polyethylene water storage tank of 500 litre capacity hoisted and fixed in position complete all as specified and as directed. Make:- Rotex / sintex, Polywel / SPL / Polycon / Diplast / Nilkand / Oriplast / Jindal Jaipur

Supply and fix in repairs grating doom 125mm dia of PTMT (Minimum wt 25 Gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

All as per item No. 41 above but 20mm bore.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed. Make:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd

All as per item No 43 above but 20 mm outer dia.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag. .

Supply and fix in repair stop cock concealed type of 15mm bore fancy type, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.

Supply and fix in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Supply and fix in repair brass chromium plated shower rose of 125mm size fixed in 15 mm dia pipe all as specified and directed. Make:- Parryware / Essco / Hindware / Marc Roca / Marc / Cera / Crabtree / Bluestar Marc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/S Somany ceramic Ltd. ( Ether) / Prayag.

Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed. Make:- (Model No.BSSBSD-52 of Blue Star or SBSD 05 of Joyna / equivalent in prayag..).

Supply and fix in repair stainless steel kitchen Plate Rack of size 36''x36''x10'' complete all as specified and as directed Make:- .(Model No.KPR-317 of Blue Star or P-348 of Prayag / equivalent in Nirali / Suyog / ) .)

Supply and fix in repair PVC Multy Utility Mirror Cabinets of size 355mmx455mm complete all as specified and as directed. (Make :Prayag / Polytuf or eqvt in Parryware / Nycer / )

Supply and fix in repair chromium plated towel rail of 20 mm dia, D type, 600mm long between flanges fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Make:- Kohler / Parryware / Grohe / Bluestar silver line.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing of shutters of any description exceeding 1 Sqm each and not exceeding 2 Sqm with old serviceable builders hard ware articles / with new builders hard ware articles if any. (Old serviceable shutter obtained from item No 54 shall be reused).

Materials and labour for treating back of chowkhats etc with tar or coal tar black paint, area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed.

Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. Specie:- Sal / Bijasal / Benteak / Laurel/ Hollock , Chikrassy/, Gamari /, badam / kalasiris.

Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed. Specie for item Nos. 59 & 60:- :- Sal / Bijasal / Benteak / Laurel/ Hollock , Chikrassy/, Gamari /, badam / kalasiris. Make for item Nos. 59 & 60:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed. Make for item Nos. 61 & 62:- M/s Rajshri Plastiwood,/ Kumar Arch Tech Pvt Ltd, M/s Sintex India Ltd,/ HINDOPAN,/ Marino / Polyline.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset / Prayag

Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. Make for item Nos. 67 to 69:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag.

Taking down old unservicebale steel window shutter of any description and size.

Supply and fix powder coated aluminium frame for doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fix sliding powder coated anodised aluminium window shutters for gauged, aluminium section weighing 0.55kg/m including necessary joining cleats, roller rubber neoprene packing/gusket,etc complete all as specified and directed.(Note- Glass shall be measured and paid separately)

Supply and fix sliding powder coated anodised aluminium window shutters for glazed , aluminium section weighing 0.55kg/m including necessary aluminium channel, aluminium screw as required etc complete all as specified and as directed(Note - Wiremesh shall abe measured and paid separately). Make for item Nos. 71 to 73:- Jindal / Hindalco / Indalco.

Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed. Make:- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyam metallics and energy ltd / Jindal

Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed. Make for item Nos. 75 & 76:- Saint Gobain, Modi Float, Triveni Float Glass, Crown, Prayag polymers, Atul, Golden fish, Kohinoor / Pilkington Glass

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm,conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, conforming to IS, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination and other side balancing white lamination fixed in cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed.

Supply and fix in repairs prelaminated particle board 18/19 mm thick, interior grade one side decorative choice lamination & other side balancing white lamination fixed in cup boards shelves with front side 6mm thick teak wood lipping/edging complete all as specified and as directed. Make for item Nos. 79 & 80:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Eco-board / Archid Lam / Century Lam / Shirdi Industries Ltd (ASIS)

Material and labour for cementitious grouts mixed with admixture around water spouts, CI pipes / PVC pipes of any dia complete all as specified and as directed. (Make : Cebex 100 of Fosroc/Intraplast EP of SIKA/ or equivalent brand of PIDILITE)

Supply and fix in repair of towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd.

Supply and fix in repair UPVC (SWR) pipe 110 mm bore,single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

Supply and fix in repair PVC(SWR) bend 110 mm dia complete all as specified and directed.

Supply and fix in repair PVC(SWR)branch piece, single T equal or unequal 110 mm dia complete all as specified and directed. Make for item Nos. 83 to 85:- Prayag /Polytuf / Supreme / Prince / Reliance / Jain pipes / Finolex. / Kisan / M/S Fusion Industries LTd

Dismantling cast iron drain pipes in cluding fittings, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed.(Note : Excavation if required, shall be measured and paid separately)

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix in repairs 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed.

Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed

Supply and fix 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

Supply and fix 100mm bore cast iron cowls complete all as specified and as directed. Make for item Nos. 88 to 93:- AMC / ICC / Hepco / PIC / BIC / SON/ Jayaswal Neco Industries LTD

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for brickwork with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Material and labour for complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint, first quality, over a coat of cement primer complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base pain, first quality,t over a coat of cement primer complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint, first quality, to wooden surface exceeding 10cm width or girth including preparation of old painted wooden surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamal paint, first quality, on steel surface of any description over 10cm widht or girth including preparation of old painted surfaces complete all as specified and as directed.

Complete removal of existing treatment of wall including washing, rubbing down and stopping of old treatement and material and labour for applying birla wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall complete all as specified and as directed.

M&L for applying wall care putty and appling two coats of oil bound distemper, first quality, over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed. Make for item Nos. 97 to 102:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed. Make of lime:- Birla white / Suryacem / Lovelycem.

All as per item No.103 above but in ceiling.

Material and labour for applying two coats of synthetic enamel paint, first quality over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint, first quality over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed. Make for item nos 105 & 106:- Asian / Berger / Jenson & Nicholson / Shalimar.

Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods of not length not exceeding 1.25 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and nec fixtures complete all as specified and directed

Taking down pelmet boxes and supply & fix Decorative /Fency type curtain rods length exceeding 1.25 m but not exceeding 2.0 m of Aluminium /brass alloy suitable of 20 mm dia alongwith fancy brackets and nec fixtures complete all as specified and directed. Make for item Nos. 107 & 108:- Unique Décor Marvel / Vista /Lavolor / Mac Decor.

M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings.

M&L for 100mm thick cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in to floor all as specified and directed.

Material and labour for 300x300 x25 mm thick PCC designer Pre-polished tiles (Factory make and approved size) as in floors, set & jointed in neat cement slurry and pointed in coloured cement with pigment over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. Make:- Ultra tile / Anjali tiles / Nitco / Mehatab / Terra firma / Ecco scope./ M/S Stylish Precast Pvt ltd.

Demolition of reinforced concrete of any description & in any position

M&L Providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) as in manhole cover set in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete of any description and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition to roof treatment should be done carefully . (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Debris/retrieved materials shall be disposed off out of MoD land as directed by the Engineer- in- charge.

Mterial and Labour for providing plain cement concrete 1:2:4,type B1 using 20mm graded aggregate as in roof padding over RCC slab,laid in slope as per requirement, mixed with integral water proofing liquid admixture as per manufacture's instructions complete all as specified and as directed. Note :- (i) Average thichness of PCC shall be 50 mm (ii) Intrgral water proofing liquid admixture shall be measured and paid seperately under appropriate item here in after.

Material and Labour for water proofing treatment with APP based standared membrane over PCC padding of roof with the following courses of treatment :- (a) Apply bituminous primer (IS-3384)@0.40kg/Ltr per sqm of the surface area,as per including cleaning the surfaces and all as specified. (Make of primer:-Pibial primer of TEXA or equivalent product of BITUMAT/BITUNIL/SIKA) (b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (4 KG /Sqm)with 10 cm over laps and torch bonded at joints including surfacepreparation before and after application of treatment as per manufactures instruction complete all as specified and as directed. (Make of APP Membrane to Moply FP 4 kg mineral of TEXA/WP Shield 103 PM of SIKA or Eqiui valent material of BITUNIL/ BITUMAT.)

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated FRLS, 1100 volts grade, unsheathed, single core, multistranded copper conductors 1.5 sq mm (nominal area) for phase, neutral and continuous earth wire drawn through and including PVC Casing -N- capping (medium duty) double lock type of 20mm size with fittings & accessories, pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3mm thick bakelite sheet for fixing switches, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for one light / fan point controlled by one 1 way switch complete all as specified & directed.

All as per item No 118 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches.

All as per item No 118 above but for one 3/5 pin 6 Amps socket outlet on the independent board.

All as per item No 118 above but for one call bell point controlled by one bell push.

All as per item No. 118 mention here in before but for one light point controlled by two Nos. two way switches.

Material and labour for point wiring (surface type) with PVC insulated FRLS, 1100 volts grade, unsheathed, single core, multistranded copper conductors 2.5 sqmm (nominal area) for phase & neutral and 1.5 Sqmm (nominal area) continuous earth wire drawn through and including PVC Casing -N- capping double lock type of 20mm size with fittings & accessories, pressed steel sunken terminal box made out of 1.6mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3mm thick bakelite sheet for fixing switches, sockets, regulator etc and earth continuity conductor shall be connected to common earth and earth dolly for 3/5 pin 16 Amps socket outlet complete all as specified & directed:- Note for item Nos. 118 to 123:- Cost of cutting of wall, if any, for housing of pressed steel sunken terminal box and also making good the disturbed surfaces are deemed to be included in the unit rate. Makes for item Nos. 118 to 123:- Make of cable:- Polycab / Finolex / Havells / KEI / HPL / Mescab / RRkabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries.

Material and labour for switch socket combination multi purpose 2 in 1, 5 Pin,16 Amps, flush type complete all as specified and as directed.

Materials & labour for call bell Ding Dong, AC, 230 volt, single pole complete all as specified and as directed

Supply & fixing bell push, flush type, 6 Amps complete all as specified and as directed

Materials & labour for switch piano flush button 6 Amps single pole, 1 way complete all as specified and as directed.

Material and labour for switch socket combination 5 Pin, 6 Amps flush type complete all as specified and as directed

Materials and labour for switch flush type 5 amp, SP two way complete all as specified and as directed

Materials and labour for socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.

Materials and labour for lamp holder suitable for LED lamp insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Materials and labour for ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and as directed.

Materials and labour for electronic fan regulator (step rotary type), AC 240 volt. Make for item Nos. 124 to 133:- Anchor / Cona / Bajaj / crabtree / Havells / Orient / Usha / Legrand / Standard / C&S / HPL.

Supply & fixing MCB DB (Double) SPN, 6 way sheet steel with bus bar, din rail, neutral link and earth bar including taking down old DB with fitting & fixtures all as specified and directed. (Make: Indoasian Cat No. 811806/Havells Cat No. DHDPSHOSRW06 / or equivalent L&T/ C&S/ Standard/ HPL

Supply & fixing MCB, SPN, 32 amps, 240 volts complete all as specified and as directed. Make: Havells / L&T/ C&S / Indoasian/Standard/ HPL

Supply & fixing MCB, SP ‘C’ series, 6 to 32 amps, 240 volts complete all as specified and as directed. Make: Havells / L&T/ C&S / Indoasian/Standard/ HPL

Supply and fix LED tube light fitting including LED tube rod of extruded alluminum and PC diffuser and inbuilt driver of 18/20 Watt and two Nos 2nd class hard wood round block and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fittings including taking down old u/s fluorscent tubelight fitting. complete all as specified and as directed. Make : Havells Cat no. of tube rod CRYSTAL1213T8DSTL20WLED865SGLASS and Fitting(Batten) cat no. REGALBATTENT8UPTO1/22WSSBSWH) bajaj Cat No of tube rod BLRB20 W cw led and Batten Cat No. BLRB-DB 118 Century LED tube rod Cat No. TWPP020C and fitting Cat No. KCCF0200 equivalent in / Jaguar / HPL / C&S / Orient.

Supply and fix wall mounted LED Batten ,extuded alluminium heat sink provided for efficient sink provided for efficient heat dissipation and integrated electronic driver light fitting 8/10 watt, 230 V attractive type with metalic channel and white reflector, suitable for mirror fitting incl LED lamps complete with all accessories and pre wired twin core copper conductor of 23/0.0076mm from ceiling rose to connector of tube lgiht fittings incl taking down old unservicebale light fittings all as diected and specified For fitting (Make : Bajaj Cat No. BCSLB10WH / Havells cat no.LUMILINEBS9WLED840SPCWH / equivalent in Century LED Cat No. BWUA012C / Jaguar / C&S / Orient / HPL.)

Supply and fix in repair LED light fitting, 1x10/12 W bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down the old unserviceable fitting complete all as specified and as directed. Make:-Century LED Cat No. HWAR012C / Havells cat No. HEXAFT10WLED857SSYMBOPC / Bajaj Cat No. BIBWP 10W or equivalent in C&S / Jaguar / Orient / HPL)

Supply and fixing LED building security light fitting 25 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracket complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Make:Century LED Cat no. SPSP025C0918/ Havells Cat No. ENDURAPEARLSL25WLED757SASYTOPCMP / Jaguar Cat No. LPCRSRT25WXC or equivalent in C&S / HPL / Orient // Bajaj.

Taking down the old unserviceable CFL/GLS lamp and supply and fix in repair LED lamp (B22 Base type) of 1x7 W after complete all as specified and as directed. Make:Bajaj/Havell's/C&S / HPL / Orient.j / Century / Jaguar

Material and labour for sub main wiring with two single core PVC insulated FRLS cable with Copper conducter unsheathed cable of size 6.0 sqmm drawn through & including PVC casing caping with 6.0 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unservicable complete all as directed. Note : Three run of 6.0 sqmm & one run of Casing caping shall be measured as one unit. Make of cable:- Polycab / Finolex / Havells / KEI / HPL / Mescab / RRkabel. Make of casing-N- caping:- Plaza / Presto Plast / Precision / M/S AGK Industries

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified as directed

MASTER BUILDERS

ELECTRO COMMERCIAL CO

SEN ELECTRIC WORKS

PUTUL CONSTRUCTION CO.

NUPUR CONSTRUCTION

BHARUKA ENTERPRISES