WBHD/EE/ED-1/eNIT-107/2025-26

Amount

Sub Head 01 - Distribution Wiring Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/ call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] Average run 10 mtr

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC. On board

Sub Head 02 - BDB,PDB,VTPN ETC Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Up to 160A- 4 way (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of E.I.C.

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection. 125 A FP (Make: Legrand/Seimens/Schneider/ABB/L&T) as per choice of E.I.C

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS. (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ) 4 Way

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 Way (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS (Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ] 63 A FP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make: Legrand/Seimens/Schneider/ABB/L&T) as per direction of EIC. ] 63 A TP

Sub Head 03 - Wires & Cables Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and makingnecy. connection as required . 3x1.5 sqmm ECC

2x2.5 sqmm+1x 1.5 sqmm ECC

2x4 sqmm+1x 2.5 sqmm ECC

2x6 sqmm+1x 4 sqmm ECC)

4 x 10 sqmm+2x 6 sqmm ECC)

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/RR/polycab) as mentioned below as per choise of EIC. 2 Core 6 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.2.5 sqmm

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/Havells/polycab/KEI/RR) as mentioned below as per choise of EIC. 4 Core 25 sqmm For meter to VTPNDB

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 Core upto 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. 4 Core 25 sqmm cable

Sub Head 04 - Switch & Sockets Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 6 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works.2 Module

4 Module

Supply & Fixing 240 V 6 A Modular type switch on existing GI Modular type switch board having top cover plate and making necessary connections as required .(Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V 16 A Modular type switch on GI Modular type switch board having top cover plate and making necessary connections as required. (Make:- Legrand/Cabtree/Schneider)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket, without plug top and switch, on existing GI Modular type switch board with topcover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 25A Modular starter (Brand approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V, 10 A, 2(Two) way Modular type switch (approved make) on existing GI Modular switch board having top cover plate and making necessary connections as required (Make: Legrand/Seimens/Schneider/ABB/L&T) as approved by EIC

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connection

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Sub Head 05 - Supply & Fixing of Fittings Supply and Fixing of 10 L Geyser (5 Star Rated) incl. necessary holding clamp (Make:Havells-Fabia/Bajaj or equivalent model as approved by EIC/Authority) incl. IN/OUT hot & cold wter pipe line of good quality and necessary inetrconnection as per direction of EIC

Supply & Fixing of 1200 mm sweep; 32W; 350 rpm; 225 cmm; with remote; 5 Star BLDC ceiling Fan; (Make:-Orient model-I Falcon or equivalent model of CG/USHA as per approval of EIC/Authority) complete with all accessories, down rod etc. & without regulator

Supply and Fixing of 25 L Geyser (5 Star Rated) incl. necessary holding clamp (Make: Havells-Fabia/Bajaj or equivalent model of Venus as approved by EIC/Authority) incl. IN/OUT hot & cold wter pipe line of good quality and necessary interconnection as per direction of EIC

Supply and Fixing Heavy duty exhaust fan 80 Watt, 230 mm (9'') sweep 1370 RPM (Make EPC or equivalent model of USHA/Crompton/Orient) as per choice of E.I.C

Supply and Fixing of 4ft single Commercial LED tube incl. Supply of 1 no. 40W LED Tube (110 lm/Watt) [Make- Phillips/Crompton/wipro as approved by E.I.C]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Supply and fixing of 15-watt Round LED Downlighter Recessed LED Downlight for False Ceiling, LED Ceiling Light for Home and Hall of Cut Out: 6 inch, Cool Day Light (Make:- Philips DN296B LED15S-6500 PSU WH o its equivalent of Crompton/ Wipro as per direction of E.I.C)

Supply and fixing 14 W LED bulb (make- Phillips/Crompton/wipro as approved by E.I.C) on existing batten holder

Supply & Fixing metal body decorative single head wall light fittings with 15 watt warm white light on wooden circular board (Make philips Oriel Dimmable wall light Model- 34141/ crompton/bajaj/ Philips Muziris)

S&F 7.5 W LED 450lm Decorative type mirror light (make- Phillips/Crompton/wipro as approved by E.I.C)

Fixing of 3 Module 2W, 3000K LED Foot Light fittings. incl. S/F 3 Module MS flush box in wall as per approval of EIC/Authority.

Supply and fixing of LED strip light (over all length 5mtr) (Make- Phillips/Crompton/wipro as approved by E.I.C) including necessary connections.

Supply & Fixing Celling Hanging decorative Chandelier Light (Jhumur) for Drawing & Dining space ( Make -Philips Model No. 581864 Colour Mirror stainless Steel Dimensions (mm) Dia 465 x H 1450 Lamp base G9 Wattage 6x42W Max* Lumen/CC or its equivalent of Crompton/wipro as approved by E.I.C)

Supply & Delivary Ornate Wood E27 1*Max20W Table Lamp For Bed Room ( Make- Philips, Model No. 582026 Colour Natural wood finish Material Wooden Wooden Dimensions (mm) 260x260x485 Lamp base E27 Wattage 1 X 20W (Max.)* Lumen/CCT or its equivalent of Crompton/wipro as approved by E.I.C

SITC of 32 inch model LED Smart TV, HD Quality resolution of 1366 x 768 pixel of Model No- KD32W825 (Make- Sony/Samsung/ LG)or equivalent model as per choice of E.I.C

SITC of Hand Dryer Automatic Household Commercial Electric Automatic Sensor, 1000 Watt for Bathroom (make: Euronics EH270N or its equivalent model of EASY2HOME®/ Plantex as per choice of E.I.C)

SITC of 50 Hz 230V, 1200 VA Micro Controller Based Intelligent Control Design Inverter suitable of 8 hrs back up for Load upto 1200va with following spefication- VA Rating: 1200VA/12V; Max. Peak Load: 960 watt, Inverter Compatibility: Designed for all types of power cut situations with high charge acceptance and low maintenance,Efficiency >80%,Battery Compatibility - Compatible with 1 X (12V) battery of Capacity Between 100 Ah-200 Ah Battery. The Ups Supports wide range of Batteries Like A Flat Plate, Tubular, Smf (To Be Purchased Separately,Display: Digital LED display for status of Power back-up/battery charging time in Hours and Minute,Item Dimensions: 42 x 45 x 22 CM ; Item Weight: 16Kg. (Make-Microtek,model Number UPS SEBz 1200VA/ Luminous/ Amaron/Exide)

Supply & replacement of 150 AH, 12V Mono Block battery suitable for Microtek Inverter (900-1200 Watt) as per direction of EIC. [Make-Exide, Model no-EP150-12 or equivalent model of Amar Raja(Quanta)].

Supply and delivery of Microtek Brand/or equivalent model of Luminous brand All-in-one (AIO) Trolley Compatible for All Types of Batteries (Single/Double/Jumbo/Flat Plate/Tall Tubular Battery)

Supply & delivery of Inverter type split AC machine having cooling capacity not less than 5000W (1.5 T), ISEER 3.8 to 4.39, BEE rating not less than 3star, Noise level not more than 50db.This split AC machine fitted with Scroll/rotary compressor,LCD remote, & all other accessories suitable for refrigerent-R-32/R410A . (make- O-General/ Hitachi/Daikin/as per approved by EIC)

Installation, testing & commissioning of 2/1.5 ton, Ac machines indoor unit on wall & outdoor unit by means of ready outdoor type frame fixed on wall by means of fastner & bolts incl. Mending good the damages to original finish.

Supply & Installation of Extra Add-on items- HVAC grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle,screw, insulation tape, fastner etc for above AC machine as per direction of EIC

Supply & Laying of 1.1KV grade 4C/Cu/XLPE/PVC/ 2.5sq.mm cable with gas line as per direction of EIC for making interconnection/communication between Indoor to Outdoor unit of Split type AC m/c.(Make- RR/Finolex/Polycab as approved by E.I.C)

Supply & Laying of 1.1KV grade 3C/Cu/XLPE/PVC/ 2.5sq.mm cable with gas line as per direction of EIC for making interconnection/communication between Indoor to Outdoor unit of Split type AC m/c.(Make- RR/Finolex/Polycab as approved by E.I.C)

Supply & Laying drain water piping work out of UPVC/HDPE hard pipes (HB/Supreme/ Oriplast) incl. Fitting, accessories bend, elbows, tees, flanges, taping etc 20mm hard 20 mm hard PVC pipe (heavy type) for water drainage.

Charges for dismantling of existing Split/Window AC machines including existing indoor /outdoor unit, cu.pipes & wires etc. including all others accessories incl. mending good damages as per GS and clearing/removing from the site as per direction of EIC.

Supply and Delivery of 1.1 KV grade following sizes Al. armoured PVC/XLPE cable (Gloster/RR/polycab) as mentioned below as per choise of EIC.2 Core 10 sqmm

Laying of 2 core 10 sqmm cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish at an average depth of 75 mm in floor/pavement/wall etc.

Laying of one No. 2 core 10 sqmm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supply & Fixing of 240V, 70 Watt (Efficacy not less than 110 LPW with IP 66 protection, 10 KV SPD included) street light fitting in place of the existing fitting including taking down the defunt street light. (Make: Crompton CRP-409-70-57-SL_GL-NSG or its equivalent of Philips/Wipro/Jaquar) with NABL accredited lab with valid test certificate.

Supply & Fixing of 240V, Minimum 40 W LED decorative post-top luminarie complete with all accessories and equipped with IP65 Protection (Crompton , or equivalent model of Philips/Jaquar/wipro/other equivalent make as approved by E.I.C) on existing MS Pipe/Mini Pole as per direction of E.I.C

SITC of LED 2 Nos Glow Sign board 10ftx4ft with stainless steel frame work, ACP outdoor type covering and Acrylic letter illuminated with waterproof LED lightsmake Samsung/Cray/Nichia with waterproof power supply unit as required. The letters and size of the board will be approved by EIC incl. Scaffolding charge for the above mentioned work on the said building incl. all carying charges. i. 10ftX4ft,ii.10ftX5ft

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting a) 200 x 150 x 100mm

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish . From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 2 Core 6 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 6 sqmm

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 Way

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make: Legrand/Seimens/Schneider/ABB/L&T) as per choise of EIC. 40 A DP MCB

SITC of 20 Pair Un armoured Teeptore cable. (0.5mm. Dia (Minimum)) DELTON/FINOLEX/POLYCAB

SITC of 50 Pair Telephone DB, Powder coated sheet steel 18SWG with Backmounting frame, original KRONE Module and locking arrangement. Make as per sample

SITC of 20 Pair Telephone DB, Powder coated, Epoxy Painted sheet steel 18SWG with Backmounting frame, original KRONE Module and locking arrangement. Make - as per sample

SITC of Non CLI Analog Push Bution Telephone Set (Make :- NEC, BEETEL Matrix, Unify, Binatone, Avaya or Equivalent. Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service

ITC of I/O port adpater RJ11 with Gl box and Single face cover plate etc Make: Legrand, R & M. Tyco, Commscope Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service except force majeure.

SITC of EPABX with provisin of comection of 4 CO line and 32analogue extension and expandable upto 64 analogue extension. Power Supply: Typically 110 to 275 VAC, 50 Hz (or 90W SMPS), Power Backup: Built-in Battery Charging Circuit, Operating Temperature: 0 to 50°C, Technology: Digital TDMPCM Non-Blocking, Stored Program Control, Distributed Processing Architecture. Make-Syntel Neos, Unify, Matrus, Conel, Avaya Warranty: 03 (Three) years onsite comprehensive OEM warranty with parts and service

Supply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

SITC of Networking Horizontal unArmoured cable, 1000Base-T (Gigabit Ethernet) , 100Base-T (Fast Ethernet), 10Base-T (Ethernet), 1-500 MHz (minimum) category-6, 4 pair,U/UTP, 24 AWG Solid bare copper conductor with FEP insulation, polyester separator, overall shield, Flame arrest jacket LSZU Outer sheath Cover as to standard of ISO/IEC 11801Ed 2.0, EN 50173-1 and TIA/EIA 568C Make: 3C3, Molex, Legrand, R & M, beldon, Tyco, Comscope

SITC of Universal Wi-Fi 6 Router, Dual Band, Mesh Ready, Upto 6 Gbps Speed, 8K Streaming, WPA3 Advanced Security, MU-MIMO, OFDMA, Wide Coverage, Easy Setup, with minimum 1 year recharge(make: JioHome App (JIDU6801 IN) Jio AX6000 or equivalent model of D-Link/ ASUS or as per choice of E.I.C)

Sub Head 06 - Earthing Excavation of soil for installation of Earth Electrode and filling & ramming. B) For Morrum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: a) By ISI-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) iii) No 8 SWG

Add. G.S.T.@ 18% (on Total from item no 1 to 90) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 90 + GST@18%) by bidder

SARKAR ENTERPRISE (BID ID -6860087)

MONDAL ENTERPRISE (BID ID -6856210)