Construction of International Potato Centre (CIP) at Agra

COMBINED ABSTRACT OF COST

SCHEDULE AMOUNT NON SCHEDULE

S.NO PARTICULARS

(in Lacs) AMOUNT (in Lacs)

A BUILDINGS COST

1.00 LAB BUILDING-

1.1 COST OF CIVIL WORK 103018630.94 8047504.38

1.2 COST OF INTERNAL WATER SUPPLY & SANITATION WORK 4106498.73 157411.10

1.3 COST OF INTERNAL ELECTRIFICATION& FIRE FIGHTING WORK 55754567.80 671063.83

1.5 COST OF FURNITURE WORK 0.00 7794246.92

2.00 FARM MANAGEMENT & COLD STORAGE

2.1 COST OF CIVIL WORK FARM MANAGEMENT 14133732.58 1258856.96

2.2 COST OF CIVIL WORK COLD STORAGE 12986250.14 719071.94

2.3 COST OF INTERNAL WATER SUPPLY & SANITATION WORK 1053717.33 45443.30

2.4 COST OF INTERNAL ELECTRIFICATION & FIRE FIGHTING WORK 4487100.55 122184.00

B EXTERNAL DEVELOPEMNT COST

3.00 EXTERNAL DEVELOPMENT-

3.1 CEMENT CONCRETE ROAD 13883746.56 0.00

3.3 HORTICULTRE 5325273.13 0.00

3.4 PUMP ROOM-CIVIL 1262583.53 0.00

3.9 EXTERNAL ELE.(DG SET ,STREET LIGHT,CCTV,EXTER FF ) 17416509.20 432022.00

4.0 EXTERNAL PLUMBING 3580875.06 4740369.96

4.1 INTERNAL AND EXTERNAL SIGNAGES WORK 0.00 1109497.36

C PLANT UTILITIES COMPONENTS

PLANT UTILITIES - DISTRIBUTION AND GENERATION (AS PER DETAILED ATTACHED

ACCORDING TO CLIENT REQUIREMNET)

PLANT UTILITIES - CHILLED WATER PLANT (AS PER DETAILED ATTACHED ACCORDING

TO CLIENT REQUIREMNET)

TOATL (SCHEDULE AND NON- SCHEDULE AMOUNT) 335753426.85

SAY (in Lacs) 3357.53

Digitally signed by VARUN

ABSTRACT OF COST CIVIL WORK

Sr No Sub Head DSR Amount Non DSR Amount Total Amount

Sr No Sub Head DSR Amount Non DSR Amount Total Amount

3 Reinforced Cement Concrete 42856155.82 0.00 42856155.8

5 Cladding Work 0.00 0.00 0.00

13 Structural Glazing Work 7852627.30 0.00 7852627.30

14 Miscellaneous Work 0.00 3544629.04 3544629.04

ARCH-EN-DESIGN Digitally Summary_

signed by VARUN

ESTIMATE - POTATO CENTER

Sl.No. Description Unit Quantity Rate DSR Amount

I 2.0 EARTH WORK

Carriage of materials by Mechanical Transport including loading, unloading and stacking of

Earth up to 5 km

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including

getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed

by Engineer-in charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

3 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming cum 3391.62 196.00 664757.30

and watering, lead up to 50 m and lift up to 1.5 m.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

4.1 2.26.1 All kinds of soil

From 1.50 mtr. to 3.00 mtr. cum 126.80

Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and inequalities not

exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.

ANTI-TERMITE TREATMENT

Providing Pre-constructional anti- termite treatment and creating a chemical barrier to the

building by injecting chemical emulsion of required concentrations under grade slab and

Grade beam, all around the footings, column pits, trenches, pits, tunnels, wall trenches,

back fill, plinth filling, junction of wall and floor, Retaining / side walls of basement floor,

external perimeter of building, surrounding of pipes, expansion joints, below UG sump and

Retaining / side walls etc.as per instructions of chemical manufacturer and all as directed.

The treatment shall be carried out strictly in accordance with the technical specification and

7 MR-1 conforming to IS 6313 or equivalent BS specification. The chemical to be used as

insecticides for the treatment shall be 50% EC (Imdachloropid 30.5 SC)and the application

shall be dilute one part of chemical 50% EC with 49 parts of water to get 1% emulsion and

strictly in accordance with the manufacturer's specification, as specified by consultants

appothis sub- head. However, for the purpose of payment, only the actual area of structural

glazing (including width of grooves) on the external face shall be measured in sqm. up to

two decimal places. Note:-2. The following performance test are to be conducted on structu

The bottom surface of the excavations made for Foundation, column pits and trenches shall

7.1 a be treated with the chemical emulsion mentioned above at @ 5 litres/ sq. meter of surface sqm 2737.74 221.00 605040.54

The Vertical surface of sub structure (Retaining wall,foundations etc.) shall be treated @

7.5 litres/ sq. meter of vertical surface area in contract with back fill soil.

TOTAL EARTH WORK AMOUNT 2592886.87 665544.59

II 4.0 CONCRETE WORK

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand) derived from natural sources : 4 raded stone aggregate

20 mm nominal size derived from natural sources)

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

9 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for :

9.1 4.3.1 Foundations, footings, bases for columns sqm 392.15

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1

10 4.11 cement: 2 coarse sand (zone-Ill) derived from natural sources: 4 graded stone aggregate sqm 218.85 495.75 108494.89

20 mm nominal size derived from natural sources).

Extra for providing and mixing water proofing material in cement concrete work in doses by of 50kg

weight of cement as per manufacturer's specification. cement

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved

quality using 1.7 kg per square metre on damp proof course after cleaning the surface with

brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand

(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size

13 4.17 derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, sqm 208.90 749.30 156530.04

well rammed and consolidated and grouted with fine sand, including necessary excavation,

levelling & dressing & finishing the top smooth.

TOTAL CONCRETE WORK AMOUNT 3454049.61

III 5.0 REINFORCED CEMENT CONCRETE

14.1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

14.2 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete SQM. 290.52 392.15 113927.07

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses

14.4 5.9.3 Suspended floors, roofs, landings, balconies and access platform SQM. 5186.07 927.25 4808783.41

14.5 5.9.4 Shelves (Cast in situ) SQM. 927.25

14.6 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers SQM. 4025.48 736.4 2964363.47

14.7 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts SQM. 1983.60 961.3 1906834.68

14.8 5.9.7 Stairs, (excluding landings) except spiral-staircases SQM. 764.95

Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string

courses, bands, copings, bed plates, anchor blocks and the like

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

14.10 5.9.16.1 Edges of slabs and breaks in floors and walls Under 20 cm wide SQM. 608.56 208.55 126915.19

14.11 5.9.19 Weather shade, Chajjas, corbels etc., including edges SQM. 181.59 951.10 172710.25

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

15.1 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 30487.00 107.85 3288022.95

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

16.1 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 123409.00 107.85 13309660.65

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures

in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to

improve durability and workability without impairing strength; including pumping of concrete

to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering,

18 5.33 finishing and reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall

be payable separately. In case the cement content in design mix is more than 110% of the

specified minimum cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

18.1 5.33.1 All works upto plinth level

a 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 400.85 9504.75 3809931.51

18.2 5.33.2 All works above plinth level upto floor V level

a 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 1242.64 9860.40 12252927.46

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part

i) From 5th to 8th Floor Level cum 355.65

ii) From 9th to Terrace Level cum 711.30

Floor Joint 100mm Providing & Fixing of Expansion Joint system related with the Floor to

Floor/ Floor to Wall Expansion Joint Cover for 100 mm Expansion Joints Aluminium Covers

Profiles, having a Hard Wearing, Maintenance Free, long Lasting design. The surface of

the Exp. Joint Covers should have Serrated Surface for Skid Resistance and should be

ADA Compliant. The exposed surface should not exceed 113mm.The design of the Exp.

Joint Cover System should be such that it should avoid any accumulation of dirt. The Exp.

20 5.44 Joint Cover should have an Articulated Telescope Design so as to accommodate the

movements in 3 directions. The system should be in alloy 6063 T66 in Mill finish and the

total exposed surface of the profile should not be more than 113 & the installation Height

can be of 35 mm. The system can be used for standard Rolling loads of private Cars or

Cart wheel loads. The system should have ASTM1399 E certification. The extrusion should

be as ASTM 6063 T66 standards. The System shall be such that it will be flushed with the

finish The System should be ASTM-E 1399. Provision of Moiser Barrier in the Joint System

to have watertight joint is mandatory requirement all as per the manufactures design and as

approved by the Engineer-in-Charge. Approved Make: Cameo Inc (Migua)

20.1 5.44.1 Floor Joint of 100 mm gap metre 6392.55

Providing & Fixing of Expansion Joint system related with the WALL to WALL (Internal /

External) Location as per drawing and direction of engineer –In- Charge. Expansion Joint

The design of the Joint Cover System should be such that the system should snap onto a

50mm wide, hook shaped aluminum clip. The system should have gasket seals on the

edges to provide scratch protection to the wall finish and prevent accumulation of dust. The

system should be in 6063 alloy in clear anodized matt finish. Provision of Moisture Barrier

Membrane in the Joint System to have watertight joint is mandatory requirement for all

external area as per the manufactures design and as approved by the Engineer-in-Charge.

Approved Make: Cameo Inc (

21.1 5.45.1 Wall Joint of 100 mm gap metre 5305.65

Providing and fixing of expansion joint system of approved make and Manufactures for

various roof locations as per approved drawings and Direction of Engineer-In-Charge. The

joints shall be of extruded aluminium base members with, self aligning and self centring

arrangement support plates as per ASTM B221-02. The system shall be such that it

provides watertight roof to roof/roof to corner joint cover expansion control system that is

capable of accommodating multidirectional seismic movement without stress to its

components. System shall consist of metal profile that incorporates a universal aluminium

base member designed to Accommodate various project conditions and roof treatments.

The cover plate shall be designed of width and thickness required to satisfy movement and

22 5.46 loading requirements and secured to base members by utilizing manufacturer’s pre-

engineered self-centring arrangement that freely rotates / moves in all directions. The Self

centring arrangement shall exhibit circular sphere ends that lock and slide inside the

corresponding aluminium extrusion cavity to allow freedom of movement and flexure in all

directions including vertical displacement. The Joint System shall resists damage or

deterioration from the impact of falling ice, exposure to UV, airborne contaminants and

occasional foot traffic from maintenance personnel. Provision of Moisture Barrier

Membrane in the Joint System to have water tight joint is mandatory requirement. (Material

shall confirm to ASTM 6063

22.1 5.46.1 Roof Joint of 100 mm gap metre 5985.70

TOTAL REINFORCED CEMENT CONCRETE AMOUNT 42856155.82

IV 6.0 MASONRY WORK

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

foundation and plinth in:

23.1 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 46.37 7132.25 330722.43

Brick work with non modular fly ash bricks conforming to 15:12894, class designation 10

24 6.34 average compressive strength in super structure above plinth level up to floor V level in :

24.1 6.34.2 Cement mortar 1:6 (1 cement :6 coarse sand) cum 1081.01 8752.55 9461594.08

Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS

:12894, in super structure above plinth upto floorV level.

25.1 6.45.2 Cement mortar 1 :4 (1 cement: 4 coarse sand) sqm 122.83 1105.80 135819.89

Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course

of half brick masonry.

Extra for brick work I AAC block masonry I Tile brick masonry in superstructure above floor

V level, for each four floors or part thereof by mechanical means.

i) From 5th to 8th Floor Level cum 169.45

ii) From 9th to Terrace Level cum 338.90

TOTAL MASONRY WORK AMOUNT 9941008.45

V 8.0 CLADDING WORK

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm thick

28 8.2 base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing

to edges to give high gloss finish etc. complete at all levels.

28.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

a 8.2.2.2 Area of slab over 0.50 sqm sqm 5136.30

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

29 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

29.1 8.3.2 Granite work metre 510.95

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

30 8.4 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. metre 568.55

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness

to be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

32 8.31 risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sqm 1267.95

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed

33 7.38 of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an

admixture of pigment to match the stone shade.

33.1 7.38.1 8 mm thick (mirror polished and machine cut edge)

33.1.1 7.38.1.1 Granite stone of any colour and shade sqm 3094.55

TOTAL CLADDING WORK AMOUNT

VI 9.0 WOOD AND P. V. C. WORK

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood and

well matched commercial 3 ply veneering with vertical grains or cross bands and face

veneers on both faces of shutters:

33.1 9.21.1 35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws sqm 611.51 2392.65 1463129.40

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of

glass excluded) (overall area of door shutter to be measured):

35.1 9.24.1 Rectangular or square sqm 61.15 199.15 12178.22

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel

screws etc. complete:

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss /

matt/ suede finish with high density protective surface layer and reverse side of adhesive

bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for

100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with

full body threaded star headed SS screws having minimum frame density of 750 kg/cum,

screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive

39 26.86 strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame

of Class A category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and

length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth

and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be

acceptable but no extra payment on this account shall be made.

39.1 26.86.4 Double rebate Double Rebate (125X60mm) metre 1227.30 1075.70 1320206.61

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

plain flush door shutter of required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum

density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

40 26.87 minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance

to spread of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required

size with necessary full body threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90

mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm

thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester

41 9.121 resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with meter 99.00 570.95 56524.05

suitable wooden block in all the three legs. The frame shall be covered with fiber glass from

all sides. M.S. stay shall be provided at the bottom to steady the frame.

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour

and approved brand and manufacture, made with fire - retardant grade unsaturated

polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles,

with wooden frame and suitable blocks of seasoned wood inside at required places for

fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to

IS: 14856, including fixing to frames.

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

TOTAL WOOD AND P. V. C. WORK AMOUNT 6982998.09

VII 10.0 STEEL WORK

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths,

interlocked together through their entire length and jointed together at the end by end locks,

mounted on specially designed pipe shaft with brackets, side guides and arrangements for

43 10.6 inside and outside locking with push and pull operation complete, including the cost of

providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile

steel wire of adequate strength conforming to IS: 4454 - part 1and M.S. top cover of

required thickness for rolling shutters.

43.1 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover sqm 3653.20

44 10.7 Providing and fixing ball bearing for rolling shutters. each 492.35

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of

10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head,

45 10.27 comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame ,

concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

46 10.28 fixing the railing with necessary accessories & stainless steel dash fasteners , stainless kg 320.57 772.40 247608.27

steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners etc.).

TOTAL STEEL WORK AMOUNT 461875.47

VIII 11.0 FLOORING WORK

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm

thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening

compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications.

This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement :3 coarse

sand), finished with a floating coat of neat cement.

Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water

absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and

shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on

20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns

including grouting the joints with white cement mixed with matching pigments etc. complete

as per direction of Engineer-in-Charge.

Extra for pre finished nosing in treads of steps of Kata stone/ sand stone

Extra for Kata stone/ sand stone in treads of steps and risers using single

51 11.32 length above normal size up to 2.00 metre. sqm 265.70 44.15 11730.66

Kata stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

52 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 :4 (1 cement: 4 coarse sand):

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in

54 11.37 colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar sqm 117.27 1096.55 128594.28

1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc., complete.

Providing and laying double charge vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4

(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and matching pigments etc., complete.

55.1 11.41A.1 Double charge vitrified tile polished finish of size

55.2 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Providing and laying double charge vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm

thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry

@ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

57.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 1243.44 4481.30 5572227.67

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8 mm having with water absorption less than 0.5% and conforming to 1S:15622

of approved make in all colours and shades in for outdoor floors such as footpath, court

58 16.90 yard, multi modals location etc, laid on 20 mm thick base of cement mortar 1:4 (1 cement : SQM 51.84 2017.60 104592.38

4 coarse sand) in all shapes & patterns including grouting the joints with white cement

mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Supply & fixing of flexible Medintech plus /simpurity range pvc sheet flooring in 2 mm

thickness in the size of 2 mtr X 20 mtr use area classification 23/34/43 results from

independent testing demonstrate that product inherently inhibits the growth of microbial

strain MRSA. It shall be homogeneous in construction. The flooring shall incorporated a

specially (PUR) to give polish free maintenance imported pvc vinyl flooring with total

weight 28oo g/m2,dimensional stability EN-434, static electrical charge <2kv, impact sound

reduction approx ISO 717-2, good resistant to scratch, slip, fire ,chemical & does not favor

in growth fungi & bacteria, diamond 10 coating for more durabality, duly installed on smooth

and hard surface of self levelling compound with company recommended adhesive and

seamless joint. @2395/-per sqm

Carpet for auditorium

Providing and laying of printed saxony carpet of CARUS Brand, manufactured by Beaulieu

International Group or equivalent, having 100% Type 6' Nylon/Polyamide Crealon or

equivalent and 1/10 gauge, . The carpet should have a primary backing of woven pp and

secondary backing of weaveback to ensure high performance and comfort. The carpet

should be of 4M width to ensure lesser joints and minimum wastage. It should have a

minimum total weight of 1650 gsm and minimum pile weight 800 gsm , minimum number of

tufts to be 185040 or more The carpet should also qualify to the following minimum

European standards performance specifications - (a) Fastness to rubbing, dry (ISO 105 X-

60 MR 12), minimum rating should be 4-5; (b) Fatness to rubbing, wet (ISO 105 X-12), minimum SQM 263.03 2650.00 697029.50

rating should be 5; (c) Water fastness, (ISO 105 E-01), minimum rating should be 4-5; (d)

Fastness to light (ISO 105 B-2), minimum rating should be 5; (e) Thermal Resistance (ISO

8302), minimum rating should be 0,072 m² K/ W; (f) Impact sound insulation (ISO 1this sub-

head. However, for the purpose of payment, only the actual area of structural glazing

(including width of grooves) on the external face shall be measured in sqm. up to two

decimal places. Note:-2. The following performance test are to be conducted on structural

glazing system if area of structural glazing exceeds 2500 Sqm from the certified

laboratories accreditated by NABL(Nat

Providing and fixing in position wall panelling at all heights with integral densified calcium

silicate panelsttiles of size 595 x 595 mm, having NRC(Noise Reduction coefficient) of 0.50

(minimum) as per IS 8225:1987,Light reflectance of 85% (minimum). Non combustible as

per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of

61 DSR-26.24 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame

made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section

(galvanizing @120 grams per sgm including both sides) i.e.vertical studs of size 48 x 34 x

36 mm are placed at 600 mm centre to centre in a floor and ceiling channel section

of size 50 x 32 mm fixed to the floor and soffit at 600 mm centre using 12 mm dia,50 mm

long wedge type expanded zinc alloy dash fastner with 10 mm bolt. This same channel is

then to be fixed in horiziontal direction at 600 mm centre to centre so as to form a grid of

600 mm x 600 mm. Glasswool of 50 mm thickness is then to be inserted in the slots and

finally calcium silicate non combustible panelsftiles are to be screw fixed with self tapping

pan head nickel coated mild steel screws of size 13 x 3.2 mm on to this grid leaving an SQM 64.90 3117.60 202332.24

even groove of 1 mm between the panels. The joints between the panels are to be duly

jointed and finished using recommended jointing calcium silicate based compound and fiber

joint tape roll 50 mm wide (90 metre )roll and two coats of primer suitable for panelling as

per manufacturer’s specification as per direction of Engineerin- Charge all complete.With

15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles

TOTAL FLOORING WORK AMOUNT 5147.07 10443941.35 3230340.75

IX 12.0 ROOFING WORK

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone

62 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement :

3 fine sand) as per standard design :

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm

thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at

600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at

63 12.52 middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size

24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash

fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of

all T-sections shall be pre-painted with polyester paint, all complete for all heights as per

specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and

0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both

63.1 12.52.1 sides inclusive) and electro statically polyester powder coated of thickness 60 microns sqm 117.27 1902.95 223162.18

(minimum), including factory painted after bending.

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm

and 0.5 mm thick with 8 mm drop; made of Gl sheet having galvanizing of 100 gms/sgm

(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC

(Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness

60 microns (minimum), including factory painted after bending and perforation and backed

with a black Glass fiber acoustical fleece.

12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass

fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm

at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with

63.3 12.52.4 non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, sqm 839.16 1528.00 1282236.48

with 50 mm resin bonded glass wool backing.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI

(solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the

64 12.55 ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & sqm 2291.40 1703.95 3904425.92

marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts

complete, including providing skirting upto 150 mm height along the parapet walls in the

TOTAL ROOFING WORK AMOUNT 6054657.05

X 13.0 FINISHING WORK

65 13.4 12 mm cement plaster of mix :

Extra for plastering exterior walls of height more than 10 m from ground level for every

additional height of 3 m or part thereof.

67 13.5 15 mm cement plaster on rough side of single or half brick wall of mix:

68 13.16 6 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete.

Apply & supply of High Build 2.5mm to 3mm ruff N tuff rustic or dholpur Texture

finish.formulated with modified acrylic emulsion and reinforced with quartz aggregates to

withstand humidity, rain and variable climates.

71 13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of

exterior primer applied @ 2.20kg/10 sqm

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

72 13.83 Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

including applying additional coats wherever required to achieve even shade and colour.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than

73 13.41 50 gram/litre, of approved manufacturer and of required shade and colour all complete to

achieve even shade and colour :

New work (two or more coats) over and including water thinnable priming coat with cement

primer having VOC content less than 50 gram/litre

TOTAL FINISHING WORK AMOUNT 8395375.97 81300.00

XII 21.0 WINDOW

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/

wood/ Ceramic/ Gypsum work by providing weather/ structural non sag elastomeric PU

sealant over backer rod of approved quality as per architectural drawings and direction of

Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600

74.1 21.19.1 Upto 5 mm depth and 5 mm width metre 148.80 148.10 22037.28

Providing and fixing double action hydraulic floor spring of approved brand and

manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with

double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting

75.0 21.4 floors, embedding in floors as required and making good the same matching to the existing

floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with

slide plate etc. complete as per the direction of Engineerin- charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness each 4.00 2823.85 11295.40

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & double acting

76.0 21.18 hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing sqm 16.83 5325.90 89634.90

required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock

and stopper etc.to be paid separately).

2000 Series Windows – Double Rebate Windows Providing & fixing of vajra series windows

made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized

as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick,

finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7

microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion

should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section

for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for

glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter

section should be of 20x40mm. The sections are to be cut to length mitre joined with corner

75.0 MR bracket. Centre mullions to be fixed with mullion cap Shutter brackets with a inbuilt pvc lip SQM 59.40 8850.00 525690.00

to be fixed in a way that the lip overlaps the shutter corners and are not exposed . Elixir or

equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided

per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S.

Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass.

The above frames should be fixed to the concrete/masonry wall by means of self-

expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete

for finished item of work including of all taxes. (Make: Elixir Met Form Pvt Ltd. / Tata

Pravesh/Lilli Windows / A2Z Infra Solutions)

TOTAL ALUMINIUM WORK AMOUNT 122967.58 525690.00

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

XIII 22.0 WATER PROOFING WORK

Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C., kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS : 2645 in recommended proportions including rounding off junction of

vertical and horizontal surface.

75 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water sqm 769.60

proofing compound in recommended proportion including rounding off junction of vertical

and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be

100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing and laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed

with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto 300 mm height including rounding of junctions

of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compoundconforming to IS : 2645 and approved

by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of

plaster and finally finishing the surface with trowel with neat cement slurry and making

pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test. “All above operations to be done in order and as directed

and specified by the Engineer-in-Charge”:

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 2291.40 1684.60 3860087.39

TOTAL WATER PROOFING WORK AMOUNT 3860087.39

XIV 25.0 STRUCTURAL GLAZING WORK

Providing and supplying aluminium extruded tubular and other aluminium sections as per

the architectural drawings and approved shop drawings , the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour and shade as approved by the

Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws

etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid

on this account). The weight of aluminium extruded section shall be taken for purpose of

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized

system of structural glazing (with open joints) for linear as well as curvilinear portions of the

building for all heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for the specified design

loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times

78 25.2 design wind pressure without any failure), including functional design of the aluminum

sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather

silicone sealants, flashings, fire stop (barrier)- cum-smoke seals, microwave cured EPDM

gaskets for water tightness, pressure equalisation & drainage and protection against fire

hazard including:

(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5

brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect verticality and fixing structural glazing system rigidly to the

RCC/ masonry/structural steel framework of building structure using stainless steel anchor

fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc.

of stainless steel grade 316, of the required capacity and in required numbers.

(c) Providing and filling, two part pump filled, structural silicone sealant and one part

weather silicone sealant compatible with the structural silicone sealant of required bite size

in a clean and controlled factory / work shop environment, including double sided spacer

tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per

the approved sealant design, within and all around the perimeter for holding glass.

(d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of

sizes, shapes and profiles, as required as per the site conditions, to seal the gap between

the building structure and all its interfaces with curtain glazing to make it watertight.

(e) Making provision for drainage of moisture/ water that enters the curtain glazing system

to make it watertight, by incorporating principles of pressure equalization, providing suitable

gutter profiles at bottom (if required), making necessary holes of required sizes and of

required numbers etc. complete. This item includes cost of all inputs of designing, labour for

fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding

and other incidental charges including wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above and as specified.

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

The item includes the cost of getting all the structural and functional design including shop

drawings checked by a structural designer, dully approved by Engineer-in-charge. The item

also includes the cost of all mock ups at site, cost of all samples of the individual

components for testing in an approved laboratory, field tests on the assembled working

structural glazing as specified, cleaning and protection till the handing over of the building

for occupation. In the end, the Contractor shall provide a water tight structural glazing

having all the performance characteristics etc. all complete as required, as per the

Architectural drawings, as per item description, as specified, as per the approved shop

drawings and as directed by the Engineer- in-Charge.

Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded

aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof

stainless steel wire mesh shall be paid for separately under relevant items under this sub-

head. However, for the purpose of payment, only the actual area of structural glazing

(including width of grooves) on the external face shall be measured in sqm. up to two

decimal places. Note:-2. The following performance test are to be conducted on structural

glazing system if area of structural glazing exceeds 2500 Sqm from the certified

laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration

Laboratories), Department of Science & Technologies, India. Cost of testing is payable

separately. The NIT approving authority will decide the necessity of testing on the basis of

cost of the work, cost of the test and importance of the work. Performance Testing of

Structural glazing system Tests to be conducted in the NABL accredited lab or any other

accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as

per ISO/IEC 17025 1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa)

& (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of

testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method

for a range up to 2000 ml.

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method

for a range upto 2000 ml

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times

design wind pressure without any failure) as per ASTME-330-10 testing method for a range sqm 874.38 3510.50 3069510.99

5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for

Qualitative test, Tests to be conducted on site.

6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-

sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as

required and specified, comprising of an outer heat strengthened float glass 6 mm thick, of

approved colour and shade with reflective soft coating on surface # 2 of approved colour

79 25.3 and shade, an inner Heat strengthned clear float glass 6 mm thick, spacer tube 12 mm sqm 874.38 3718.70 3251556.91

wide, dessicants, including primary seal and secondary seal (structural silicone sealant)

etc. all complete for the required performances, as per the Architectural drawings, as per

the approved shop drawings, as specified and as directed by the Engineerin- Charge. The

IGUs shall be assembled in the factory/ workshop of the glass processor.

Extra for openable side / top hung vision glass panels (IGUs) including providing and

supplying at site all accessories and hardwares for the openable panels as specified and of

the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone

80 25.4 locking sets with stainless steel plates, handles, buffers etc. including necessary stainless sqm 87.44 3671.50 321035.96

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural

drawings, as per the approved shop drawings, as specified and as directed by the Engineer-

Providing, fabricating and supplying shadow box of required size and shape, for fixing in

the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the

building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50

mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have

81 25.5 facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- sqm 7.20 2159.65 15549.48

woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60

gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay

process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick

cement board including SS rivets, nuts, bolts, washers etc complete.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat

strengthened monolithic float glass of approved colour and shade with reflective soft

coating on surface # 2 of approved colour and shade so as to match the colour and shade

of the IGUs in the vision panels etc. ,all complete for the required performances as

specified, as per the Architectural drawings, as per the approved shop drawings, as

specified, and as directed by the Engineer- in- Charge.

For payment, only the actual area of glass on face # 1 of the glass panels (but excluding

82 25.6 the area of grooves and weather silicone sealant) provided and fixed in position, shall be sqm 7.20 2450.15 17641.08

measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is

included in cost of relevent Item*).“(i) Coloured tinted float glass 6 mm thick substrate with

reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of

25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading

coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of

performance glass shall be decided by technical sanctioning authority as per the site

TOTAL STRUCTURAL GLAZING WORK AMOUNT 7852627.30

XIV MISCELLANEOUS WORK

Supply & Fixing rack and pinion door closer EN size 2/3/4, with std. arm and with two

83 MR independent closing valves and latching speed adjustable by arm. Silver finish. As per EN each 139.00 3441.00 478299.00

1154. as per direction of engineer-in-charge

Supply & Fixing Type 1 Lever Handle Package with Antiviral / Antimicrobial coated Lever

Handle - clear & transparent coating with protection tested for antibacterial activity with up

to 99.9% effectiveness* as per ISO 22196 and antiviral activity with 99.9% reduction as per

ISO 21702. Pair Lever Handle on Roses & escutcheons. Including Sash lock with 72mm

CTC, 55mm Backset 20mm Square forend. EPC 60mm length both side key operation . as

per direction of engineer-in-charge

Supply & Fixing floor stop half dome with 45mm dia with fixing accessories, in satin

Chrome. as per direction of engineer-in-charge

Providing and fixing G.I Chicken mesh having wire of thickness 22 SWG and minimum

aperture of 20mm X20 MM of approved quality over the junction of RCC member and brick

86 MR /AAC wall including fixing with U nails /Screw 150 mm centre to centre in both direction sqm 6009.08 238.00 1430161.04

before plastering etc all complete as per the direction of Engineer in charge

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

TOTAL MISCELLANEOUS WORK AMOUNT 3544629

ARCH-EN-DESIGN DigitallyEstimate_updated

signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF

INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Description DSR AMOUNT MR AMOUNT

1 Sanitary Installations Works 4,89,727.05 1,29,807.10

Soil, Waste, Vent & Rain Water

3 Internal Water Supply 8,54,474.50 20,504.00

4 External Drainage System 14,34,740.43 -

Grand Total 42,63,909.83

Grand Total 42,63,909.83

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

A Sanitary Installations & Internal Water Supply

1 ,17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

per IS 13983 with C.I. brackets and stainless steel plug 40 mm

including painting of fittings and brackets, cutting and making

good the walls wherever required :

a 17.10.1.3 Kitchen sink with drain board 510x1040 mm bowl depth 200 mm

2 17.30 Providing and fixing mirror of superior glass (of approved quality)

complete with 6 mm thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers complete.

3 17.28 Providing and fixing P.V.C. Waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

a 17.28.1 Semi rigid pipe

4 DSR-17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved

quality & make and as per the direction of Engineer-in-charge. Each 26 1035.00 26910.00

5 DSR-17.34 Providing and fixing toilet paper holder :

6 17.20 Providing and fixing white vitreous china pedestal type water

closet (European type W.C. pan) with seat and lid, 10 litre low

level white P.V.C. flushing cistern, including flush pipe, with

manually controlled device (handle lever), conforming to IS :

7231, with all fittings and fixtures complete, including cutting and

making good the walls and

floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid Each 22 6631.15 145885.30

7 17.1 Providing and fixing water closet squatting pan (Indian type W.C.

pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level

white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good

the walls and floors wherever required

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440

mm with integral type foot rests

8.00 ,18.49 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 :

18.49.1 15 mm nominal bore Each 23 506.80 11656.40

9.00 ,18.53 Providing and fixing C.P. brass angle valve for basin mixer and

geyser points of approved quality conforming to IS:8931

18.53.1 15 mm nominal bore Each 67 574.30 38478.10

10.00 17.70 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.

brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making

good the walls wherever require:

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of

15 mm C.P. brass pillar taps]

11.00 18.21 Providing and fixing uplasticised PVC connection pipe with brass

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore Each 67 329.60 22083.20

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

12.00 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm

13.00 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of

quality & make as approved by Engineer in charge.

a 15 mm nominal dia Each 0 6941.00 0.00

14.00 17.26 Providing and fixing white vitreous china laboratory sink including

making all connections excluding cost of fittings :

15.00 18.84 Providing & fixing chrome plated brass battery based infrared

sensor operated pillar cock, having foam flow technology

15 mm nominal dia Each 9 8803.70 79233.30

15.00 NS-3 Providing and fixing 15mm C.P brass Single Lever Basin Mixer

Euronice Model No. FLO-3001A or approved equivalent for Wash

Basin Including cutting and making good the walls wherever

16.00 NS-4 Providing and fixing C.P. cast brass twin coat hooks fixed to PVC

rawl plug with SS screws Make Euronics, Cat. No. ACC05 or Each 23 424.60 9765.80

approved equivalent.

17.00 17.16.A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in-charge

18.00 NS-6 Providing, fixing, testing and commissioning of CP brass swan

neck wall mounted sink mixer with wall flange and swinging

casted spout complete as required and making good the walls Each 0 4243.40 0.00

wherever required. [Make :Euronics, Model:FLO-3012A].

19.00 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm

long, 200 mm wide with minimum distances of 37 mm from wall

face with concealed fittings arrangement of approved quality and Each 23 204.70 4708.10

colour,weighing not less than 88 gms.

20.00 18.65 Providing and fixing PTMT soap Dish Holder having length of

138mm,breadth 102mm, height of 75mm with concealed fitting

arrangements,weighing not less than 106 gms.

21.00 NS-9 Providing & fixing fully automatic photoelectric cell operated No-

touch urinal flushing system (Battery/electrical operated vandal

proof- twin flush (pre & post use) operation), flush mounted Each 4 7626.70 30506.80

sensors complete in all respects in fully operational conditions

[Make :Euronics, Model: EU54].

22.00 NS-10 Providing and Fixing of stainless steel fully automatic "No Touch"

hand drier suitable to operate on 220 volts, single phase 50 hz.,

A.C. power supply. [Make :Euronics, Model: EH26NW].

23.00 NS-11 Providing and Fixing ofwall mounted 1 nos Stainless Steel swing

Handicap L TYPESIZE- Grab bar SIZE-600MM (H) X 600MM

(D),32MM DIA. including cutting & making good the walls. [Make

:Euronics, Model: GR 04 LN].

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

24.00 NS-12 Providing and Fixing ofwall mounted 1 nos Stainless Steel swing

Handicap Grab bar and 1 nos 600mm25mm stainless steel grab

rail including cutting & making good the walls. [Make :Euronics,

Model: NGR-S02].

Total C/F to Summary 4,89,727.05 1,29,807.10

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

B Soil, Waste, Vent & Rain Water Pipes

25.00 12.22 Making khurras 45x45 cm with average minimum thickness of 5

cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over P.V.C. sheet

1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 Each 22 301.20 6626.40

cement : 3 coarse sand) and a coat of neat cement, rounding the

edges and making and finishing the outlet complete.

26.00 Providing and fixing to the inlet mouth of rain water pipe cast

DSR-12.44 iron grating 15 cm diameter and weighing not less than 440 Each 22 54.70 1203.40

28.00 17.35 Providing and fixing soil, waste, vent and rain water pipes

Hubless centrifugally cast iron pipes epoxy coated inside &

outside IS : 15905

Hubless centrifugally cast iron pipes epoxy coated inside &

outside IS : 15905

29.00 Providing and fixing MS holder bat clamps of approved design to

cast iron (spun) pipe embedded in and Including cement concrete

17.37 blocks 10 x10 x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4

graded stone aggregate 20mm nominal size) including cost of

cutting holes and making good the walls etc.

30.00 Providing and fixing bend of required degree with access door,

17.38 insertion rubber washer 3mm thick, bolts and nuts complete.

Hubless centrifugally cast iron epoxy coated inside & outside IS :

Hubless centrifugally cast iron epoxy coated inside & outside IS :

31.00 17.39 Providing and fixing plain bend of required degree.

Hubless centrifugally cast iron epoxy coated inside & outside IS :

32.00 Providing and fixing double equal plain junction of required

Hubless centrifugally cast iron pipes epoxy coated inside &

outside IS : 15905

Hubless centrifugally cast iron pipes epoxy coated inside &

outside IS : 15905

33.00 Providing and fixing single equal plain junction of required degree

Hubless centrifugally cast iron epoxy coated inside & outside IS :

Hubless centrifugally cast iron epoxy coated inside & outside IS :

34.00 Providing and fixing single unequal plain junction of required

Hubless centrifugally cast iron epoxy coated inside & outside IS :

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

35.00 Providing and fixing Hubless cast iron offsets epoxy coated inside

& outside as per IS : 15905

17.54A.1 130 mm offsets

36.00 17.56 Providing and fixing terminal guard:

Hubless centrifugally cast iron epoxy coated inside & outside IS :

37.00 Providing and fixing shielded coupling for Hubless centrifugally

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket Each 750 432.05 324037.50

17.57A.2.1 SS 304 grade coupling with EPDM rubber gasket Each 270 389.05 105043.50

38.00 Painting with synthetic enamel paint of approved drand and

manufacture to give an even shade

13.61.1 Two more coast on new work sqm 250 160.15 40037.50

P/F M.S. cap 150 mm dia Each 0 337.50 0.00

39.00 4.1 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work up

to plinth level:

4.1.3 1:2:4 (1 cement :2 coarse sand: 4 hard stone aggregate 20mm

and down gauge).

40.00 ,17.60 Providing and fixing trap of self cleansing design with screwed

down or hinged with or without vent arm complete, including

cost of cutting and making good the walls and floors.

a 17.60.1 100 mm inlet and 100 mm outlet

17.60.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside &

outside as per IS:15905

b 17.60.2 100 mm inlet and 75 mm outlet

17.60.3 Hubless centrifugally cast (spun) iron epoxy coated inside &

outside as per IS:15905

41.00 NS-13 Providing and fixing SS grating of approved quality and colour.

Circular type 125 mm nominal dia [Make :Euronics, Model:

42.00 Fire DSR Providing, laying, testing & commissioning of 'B' class heavy duty

18.8 G.I. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

For WB, Urinal FT & FD and Sink Drain pipe

18.8.3 40 mm dia nominal bore Metre 50 831.00 41550.00

18.8.4 50 mm dia nominal bore Metre 30 927.00 27810.00

18.8.6 80 mm dia nominal bore Metre 10 1335.00 13350.00

43.00 NS 14 Providing and fixing of uPVC Waste pipes 6 kg/cm2 (IS:

4985:2000) including with all fittings e.g. couplings, tees, bends,

reducers and screwed adoptors jointing with solvent cement as

per Manufacturer's specifications complete including cutting

holes or chases in wall and making good the same wherever

required. (For Prodium Drain Pipe).

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

160 mm diameter Metre 0 1591.37 0.00

110 mm diameter Metre 40 845.24 33809.60

44.00 NS 14 Providing and fixing of 110x75 mm dia uPVC Balcony Drain

45.00 NS -15 Providing & fixing of epoxy coated 25mm thick MS grating with

frame for channel drains including all accessoreis complete.

350 mm wide Metre 0 3150.00 0.00

Total C/F to Summary 13,27,556.75 7,100.00

C Internal Water Supply

46.00 18.70 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and testing of joints

complete as per direction of Engineer in Charge.

Internal Work - Exposed on Wall

a 18.7.3 25 mm nominal outer dia .Pipes. Metre 50 407.75 20387.50

a 18.7.4 32 mm nominal outer dia .Pipes. Metre 150 525.05 78757.50

c 18.7.5 40 mm nominal outer dia .Pipes. Metre 100 711.85 71185.00

d 18.7.6 50 mm nominal outer dia .Pipes. Metre 90 943.00 84870.00

e 18.7.6 65 mm nominal outer dia .Pipes. Metre 15 1674.20 25113.00

f 18.7.6 80 mm nominal outer dia .Pipes. Metre 15 2166.15 32492.25

47.00 ,18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting chases

and making good the same including testing of joints complete as

per direction of Engineer in Charge.

Concealed work including cutting chases and making good the

a 18.8.2 20 mm nominal outer dia .Pipes. Metre 370 540.75 200077.50

b 18.8.3 25 mm nominal outer dia .Pipes. Metre 90 630.40 56736.00

48.00 ,18.10 Providing and fixing G.I. pipes with two coats of anti-corrosive

bitumastic paint of approved quality : complete with G.I. fittings

and clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on Wall

a 18.10.1 & 15 mm dia nominal bore

b 18.10.2 & 20 mm dia nominal bore

49.00 Fire DSR - Providing, laying, testing & commissioning of 'B' class heavy duty

18.8 G.I. pipe conforming to IS 1239 including welding, fittings like

elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable clamp/support frame

and painting with two or more coats of synthetic enamel paint of

required shade complete as required :

c DSR Fire- 25 mm dia nominal bore

d DSR Fire- 32 mm dia nominal bore

e DSR Fire- 40 mm dia nominal bore

f DSR Fire- 50 mm dia nominal bore

g DSR Fire- 65 mm dia nominal bore

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

h DSR Fire- 80 mm dia nominal bore

50.00 DSR-18.32 Constructing masonry Chamber 30x30x50 cm inside, in brick

work in cement mortar 1:4 (1 cement :4 coarse sand) for stop

cock, with C. I. surface box 100x100 x75 mm (inside) with hinged

cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c

necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5

fine sand : 10 graded stone aggregate 40 mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12mm thick, finished with a floating coat of neat cement

complete as per standard design :

a 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class

designation 7.5

51.00 DSR-18.48 Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable

locking arrangement and making necessary holes for inlet, outlet Litre 0 11.00 0.00

and overflow pipes but without fittings and the base support for

52.00 DSR-18.77 Making core cutting machine up to 15x15 cm in R.C.C. floors and

roofs for passing drain pipe etc. and repairing the hole after

insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement Each 22 454.80 10005.60

: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),

including finishing complete so as to make it leak proof.

53.00 18.17 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

18.17.1 25 mm nominal bore Each 5 622.40 3112.00

18.17.2 32 mm nominal bore Each 6 689.60 4137.60

18.17.3 40 mm nominal bore Each 6 826.10 4956.60

18.17.4 50 mm nominal bore Each 2 1026.65 2053.30

54.00 DSR Fire- Supplying, fixing, testing and commissioning of butterfly

18.11.5 valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required :

55.00 18.19 Providing and fixing gun metal non- return valve of approved

quality (screwed end) :

18.19.4.2 50 mm nominal bore Each 1 1445.15 1445.15

18.19.6.2 80 mm nominal bore Each 1 3855.40 3855.40

56.00 NS 16 Providing and fixing forged brass ball valve of brass body with

hard chrome plated steel ball inside PTFE (Teflon) seat & ring

with chrome plated centre handle with female BSP threads

complete in all respects.

a 15 mm nominal bore Each 8 368.00 2944.00

b 20 mm nominal bore Each 24 513.00 12312.00

57.00 NS 17 Providing and fixing forged brass single acting air release valve

with screwed inlet 25 mm dia.

58.00 Providing and fixing ball valve (brass) of approved quality, High or

low pressure, with plastic floats complete :.

a 18.18.3 25 mm nominal bore Each 2 464.05 928.10

Total C/F to Summary 8,54,474.50 20,504.00

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

3.0 External Drainage System

1.0 DSR-2.10 Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, and dressing of sides,

ramming of bottoms, depth upto 1.5 m, including getting out

the excavated soil, and then returning the soil as required, in

layers not exceeding 20 cm in depth, including consolidating

each deposited layer by ramming, watering, etc. and disposing

of surplus excavated soil as directed, within a lead of 50 m :

a 2.10.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300

mm dia Metre 495 352.15

2.0 DSR-2.11 Extra for excavating trenches for pipes, cables etc. in all kinds

of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate

is over corresponding basic item for depth upto 1.5 metre).

a a. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300

mm dia Metre 65 447.23

Fixing SW Gully Trap Grade A Complete CI Grating, brick

masonry chamber and water tight CI cover frame of 300 x 300

mm size (inside) square mouth traps or "P" or "S" Type Traps.

4 ,19.7 Constructing brick masonry manhole in cement mortar 1:4 (1

cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate

20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8

graded stone aggregate 40 mm nominal size), inside

plastering 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement

and making channels in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

finished with a floating coat of neat cement complete as per

standard design :

a (A) Inside size 90×80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) : With

common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 4 12772.20

b 19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover

with frame (medium duty) 500 mm internal diameter, total

weight of cover and frame to be not less than 116 kg (weight

of cover 58 kg and weight of frame 58 kg)

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 Each 2 26407.65

5.0 18.8.1.1 Extra over item No. 25.4 for every additional depth of 0.10 m.

or part there of manhole.

a 19.8 Extra for depth for manholes

19.8.1 Size 90x80 cm

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 metre 4 8825.40

b 19.8.2 Size 120x90 cm

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 metre 2 10585.50

Digitally signed by VARUN

Name of Project : Name of Project : PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Name of Work : Plumbing Works

S. No. Ref. DSR-

Description of Item Unit Qty

2023/MR Rate DSR Amount MR Amount

6 DSR-19.27 Constructing brick masonry road gully chamber 50x45x60 cm

with bricks in cement mortar 1:4 (1 cement : 4 coarse sand)

including 500x450 mm pre-cast R.C.C. horizontal grating with

frame complete as per standard design

19.27.1 With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 Each 20 5957.90

12.0 ,19.16 Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910 on 12mm dia steel

bar conforming to IS : 1786 having minimum cross section as

23 mmx25mm and over all minimum length 263 mm and

width as 165mm with minimum 112 mm space between

protruded legs having 2 mm tread on top surface by ribbing or

chequering besides necessary and adequate anchoring

projections on tail length on 138 mm as per standard drawing 22616.00

and suitable to with stand the bend test and chemical

resistance test as per specifications and having manufacture's

permanent identification mark to be visible even after fixing,

including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size) complete as per design.

13 DSR-19.6 Providing and laying non-pressure NP2 class (light duty)

R.C.C. pipes with collars jointed with stiff mixture of cement

mortar in the proportion of 1:2 (1 cement : 2 fine sand)

including testing of joints etc. complete :

14 DSR-19.3 Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal size)

up to haunches of RCC. pipes including bed concrete as per

standard design :

a 19.3.2 150 mm dia RCC pipe Metre 90 743.10 66879.00

15.00 19.21.1 Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement cincrete 1:2:4 mix (1cement: 2 coarse sand

: 4 graded stone aggregate 20mm nominal size) cement 814.55

plastered on both sides with cement mortar 1:3 (1cement : 3

coarse sand) finished with a floating coat of neat cement and

making necessary channels for the drain etc. complete for

pipes 100 to 250mm dia. EACH 1 814.55

Total C/F to Summary 14,34,740.43 -

Digitally signed by VARUN

BILL OF QUANTITY (INTERNAL ELECTRICAL WORKS)

LAB BUILDING (G+1)

Description of Item Quantity Rate (Rs) Amount(Rs)

Sub-Head : WIRING

Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS/HFFR PVC insulated

copper conductor single core cable in surface/

1 1.10 recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing

the point with 1.5 sq.mm FRLS/HFFR PVC insulated

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm

FRLS/HFFR PVC insulated copper conductor single

core cable in surface / recessed medium class PVC

conduit, 2way modular switch, modular plate, suitable

GI box and earthing the point with 1.5 sq.mm

FRLS/HFFR PVC insulated copper conductor single

core cable etc. as required.

Wiring for circuit/ submain wiring along with earth wire

with the following sizes of FRLS/HFFR PVC insulated

copper conductor, single core cable in surface/

recessed medium class PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade,

0.7 mm solid copper conductor PE insulated, shielded

4 1.18 with fine tinned copper braid and protected with PVC

sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade,

0.7 mm solid copper conductor PE insulated, shielded

5 1.19 with fine tinned copper braid and protected with PVC Metre 585.00 54.00 31590.00

sheath in the existing surface/ recessed steel/ PVC

conduit as required.

Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

6 1.21 surface/recess including cutting the wall and making

good the same in case of recessed conduit as

Supplying and fixing following modular switch/ socket

on the existing modular plate & switch box including

connections but excluding modular plate etc. as

1.24.6 Telephone socket outlet No. 112.00 168.00 18816.00

1.24.7 TV antenna socket outlet No. 13.00 168.00 2184.00

Digitally signed by VARUN

Supplying and fixing two module stepped type

electronic fan regulator on the existing modular plate

switch box including connections but excluding

modular plate etc. as required.

Supplying and fixing modular blanking plate on the

9 1.26 existing modular plate & switch box excluding No. 389.00 47.00 18283.00

modular plate as required.

Supplying and fixing following size/ modules, GI box

10 1.27 along with modular base & cover plate for modular

switches in recess etc. as required.

1.35 Installation, Testing, Commissioning of wall bracket

/ceiling fittings of all sizes and shapes containing upto

11 two GLS/CFL/LED lamps per fitting, complete with all No. 622.00 151.00 93922.00

accessories including connections etc. as required.

Installation, Testing and Commissioning of ceiling fan,

including wiring the down rods of standard length

(upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC

12 1.45 insulated, copper conductor, single core cable, No. 204.00 332.00 67728.00

including providing and fixing phenolic laminated

sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening,

13 1.50 including making good the damage, connection, testing,

commissioning etc. as required.

Extra for fixing the louvers/ shutters complete with

frame for a exhaust fan of all sizes.

Supplying, drawing, Installation, Testing and

commissioning of CAT6 UTP LSZH 23AWG Twisted

Pair Cable in existing conduit/ on surface, Category 6

Unshielded Twisted Pair, 4 pair should be complied as

per UL/ETL verification program for compliance with

ANSI/TIA-568.2-D standard. Outer diameter should be

in the range of 6.1mm nominal with Operating

Temperature Range : -5° to +60°C, Bending Radius :

< 4 X Cable Diameter at –5°C ± 1°C and Pulling Force

: 11.5Kg etc. complete as required.

Supplying & fixing suitable size Gl box with modular

plate and cover in fronton surface or in recess including

16 1.57 providing and fixing 25 A modular socket outlet and 25 No. 92.00 807.00 74244.00

A modular SP MCB, "C" curve including connections,

painting etc. as required.

Supplying and fixing PVC batten/ angle holder including

connections etc. as required.

Sub-Head : MCCB, MCB & OB'S

Providing and fixing following rating and breaking

capacity and pole MCCB with thermomagnetic release

18 2.2 and terminal spreaders in existing cubicle panel board

including drilling holes in cubicle panel, making

connections, etc. as required.

Digitally signed by VARUN

Supplying and fixing following way, horizontal type three

pole and neutral, sheet steel, MCB distribution board,

415 V, on surface/ recess, complete with tinned copper

19 2.4 bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/lsolator)

Supplying and fixing of following ways surface/ recess

mounting, vertical type, 415 V, TPN MCB distribution

board of sheet steel, dust protected, duly powder

painted, inclusive of 200 A tinned copper bus bar,

20 2.5 common neutral link, earth bar, din bar for mounting

MCBs (but without MCBs and incomer) as required .

(Note : Vertical type MCB TPDB is normally used where

3 phase outlets are required.)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10

kA, "C" curve, miniature circuit breaker suitable for

21 2.10 inductive load of following poles in the existing MCB DB

complete with connections, testing and commissioning

etc. as required.

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying and fixing following rating, four pole, 415 V,

isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as

Supplying and fixing following rating, four pole, (three

phase and neutral), 415 volts, residual current circuit

breaker (RCCB), having a sensitivity current 30 mA in

the existing MCB DB complete with connections, testing

and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm

X 150 mm, made of mild steel, at least 2 mm thick, and

25 2.21 vitreous enameled white on both sides, and with No. 2.00 315.00 630.00

inscription in single red colour on front side as required.

Sub-Head : CABLE TRAYS

Supplying and installing following size of perforated Hot

Dipped Galvanised Iron cable tray (Galvanisation

thickness not less than 50 microns) with perforation not

26 4.6 more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.l.

suspenders including G.l. bolts & nuts, etc. as required.

4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 200.00 803.00 160600.00

Sub-Head : EARTHING

Earthing with G.l. earth plate 600 mm X 600 mm X 6 mm

thick including accessories, and providing masonry

enclosure with cover plate having locking arrangement

and watering pipe of 2.7 metre long etc. with charcoal/

coke and salt as required.

Digitally signed by VARUN

Supplying and laying 6 SWG G.l. wire at 0.50 metre

below ground level for conductor earth electrode,

including connection/ termination with Gl thimble etc.

Supplying and laying 25 mm X 5 mm G.l. strip at 0.50

metre below ground as strip earth electrode, including

connection/ terminating with G.l. nut, bolt, spring,

washer etc. as required. (Jointing shall be done by

overlapping and with 2 sets of G.l. nut bolt & spring

washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.l. strip on surface

30 5.15 or in recess for connections etc. as required. Metre 100.00 287.00 28700.00

Providing and fixing 6 SWG dia G.l. wire on surface or in

recess for loop earthing as required.

Sub-Head : MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass

compression gland and aluminium lugs for following size

32 11.1 of PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade as required.

Sub-Head : MISC. CIVIL ITEMS

Providing and fixing circular/Hexagonal G.I. Box for

ceiling fan clamps, of internal dia 140 mm, 73 mm

height, top LID of 1.5 mm thick G.I. sheet with its top

(DSR Civil- surface hacked for proper bonding, top LID shall be

33 2014 item screwed into the G.I. box by means of 3.3 mm dia Each 204.00 142.95 29161.80

no. 10.18) rounded screws, one lock at the corners. Clamps shall

be made of 12 mm dia M.S. bar bent to shap as per

standard drawing. (DSR Civil-2014 item no. 10.18)

Sub-Head : LIGHT & FAN FIXTURE

34 8.2 LED Down lighter (SMD Type) (System lumen

efficacy ≥120 <135 lm/Watt )

Supplying, installation, Testing & Commissioning of

LED Recessed/surface Down lighter (Round/

square/ Rectangular) SMD type of following body

material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per

the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt, frequency

50/60 hz, Operating temp range -5 0C to 40 0C

centigrade, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10%,

P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) <19, Flicker free (flicker should be below 5

%), life time (LED, Driver & electrical circuitry), life

time of minimum 50000 Burning Hours with 70%

of initial Lumen maintained till life ends, CCT

ANSI Bin), SDCM(Standard Deviation Color

Matching) <3, Maximum power consumption

should not more than the specified rating and

Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Digitally signed by VARUN

35 8.5 LED Down lighter (COB Type) (System lumen efficacy

Supplying, Installation, Testing & Commissioning of

LED Recessed/surface Down lighter (Round /

square/ Rectangular) COB Type of following body

material and construction as per IS : 10322 with

driver as per the requirement with Driver efficiency

>85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 0C

to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% ,

P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare

Rating) < 19, Flicker free (flicker should be below 5

%), life time (LED, Driver & electrical circuitry), life

time of minimum 50000 Burning Hours with, 70%

of initial Lumen maintained till life ends , CCT

ANSI Bin), SDCM(Standard Deviation Colour

Matching) <3, Maximum power consumption

should not more than the specified rating and

Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. OEM

36 8.7 LED Panel light 2x2 ft. (System lumen efficacy ≥120

Supplying, Installation, Testing & Commissioning of

Panel light 2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating

voltage AC 140-270 Volt, frequency 50/60 hz,

Operating temp range -5 0C to 40 0C, internal

surge protection of 2.5 KV with Short & Open circuit

protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80,

UGR (Unified Glare Rating) <19, Flicker free,

(flicker should be below 5 %), life time (LED, Driver

& electrical circuitry), of minimum 50000 Burning

Hours with , 70% of initial Lumen maintained till

life ends, CCT 3000°K / 4000°K / 5700°K

/6500°K (As per ANSI Bin), SDCM(Standard

Deviation Color Matching) <3, Maximum power

consumption should not more than the specified

rating and Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete

in all respect i/c external connections with 1.5 sq

mm FRLS/HFFR, PVC insulated copper

Powder coated die cast / Extruded aluminium

Body (Thickness≥ 1.20 mm)

37 8.10 LED Batten light (System lumen efficacy ≥120 <135

Digitally signed by VARUN

Supplying, installation, Testing & Commissioning of

LED surface mounted Batten light of following body

material and construction as per IS : 10322 with

driver (Replaceable) as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-

270 Volt, frequency 50/60 hz, Operating temp range

-5 0C to 40 0C, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% , P.

F.≥0.95, IP20, CRI >80, Flicker free (flicker should

be below 5 %), life time (LED,Driver & electrical

circuitry), of minimum 50000 Burning Hours

with 70% of initial Lumen maintained till life

(As per ANSI Bin), SDCM(Standard Deviation

Colour Matching) <3, Maximum power consumption

should not more than the specified rating and

Fixture shall be of relevant BIS standard.

Manufactures Word Mark/ Name Engraved/

Embossing/ Screen printing on housing. complete

in all respect i/c external connections with 1.5

sq.mm FRLS/HFFR, PVC insulated copper

Powder coated die cast / Extruded aluminium Body

(Thickness≥ 1.20 mm)

38 8.16 LED Flood Light, powder coated pressure die

cast aluminum (System lumen efficacy ≥120 and <135

Supplying, Installation, Testing & Commissioning

of Flood Light, powder coated pressure die cast

aluminium body with built in or separate driver as

per the requirement with Driver efficiency >85%,

Input voltage: Input voltage: 140-270 Volt AC,

frequency 50/60 hz, Operating temp range -5 0C to

50 0C, internal surge protection of 5 KV L,N,E as per

IEC 61000-4-5, Driver efficiency >85%,THD < 10%

as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI

>70, under voltage and over voltage protection,

EMI-EMC as per CISPR-15, lenses for beam

angle 30 deg-120deg as per the application and the

project requirement, suitable tilt able fitting, life time

(LED, Driver & electrical circuitry) of minimum 50000

Burning Hours with 70% of initial Lumen

maintained till life ends as per LM80

extrapolation IES TM-21-11 report, CCT 3000°K /

4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching) <5,

Maximum power consumption should not more

than the specified rating and Fixture shall be of

39 9.2 Brush Less Direct Current (BLDC) Fan without

Digitally signed by VARUN

Supply, Installation, Testing and Commissioning of

ceiling fan with Brush Less Direct Current (BLDC)

Motor, class of insulation: B, 3 nos. metal( Aluminium

alloy) blades, 30 cm long down rod, 2 nos. canopies,

shackle kit, safety rope, copper winding, steel/Al body

Power Factor not less than 0.9, Service Value

(CM/M/W) minimum as below, 350 RPM (tolerance as

per IS : 374-2019), THD (Total Harmonic Distortion)

less than 10%, suitable for operation with regulator

for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature

rise=75 0C (max.), insulation resistance more than 2

mega ohm, suitable for 230 V, 50 Hz, single phase AC

supply, Ceiling Fan compliant to IS 374:2019 fan i/c

external connections with 1.5 sq.mm FRLS/HFFR,

PVC insulated copper conductor single core cable

and earthing etc. as required.

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air Each

delivery 210 CM/Min (Minimum)

9.2.4 1400mm, service value ≥ 6.0 CM/Min/Watt, air Each

delivery 245 CM/Min (Minimum)

UPPWD Schedule Items

Supplying and laying of aluminium conductor PVC

insulated armoured served sheathed cable 1100 volts

grade at the depth of 750 mm below ground level over a

cushion of 75 mm thick sand all around and protected

40 20a.1 with burnt bricks on side and on top as directed by

Engineer-Incharge ,complete in all respect including

excavation and refilling.The armouring of the cable shall

be properly connected with the earth conductor by

Supply & Erracetion of factory fabricated & wired

metal clad dust and vermin proof floor mounting,

M.S. Channel Base with bottom and top cable

entreis Electrical control panel with TPN MCCB's

(Four Pole 36 KA with thermal magnatic

release)Switches Complete and instrument chamber

etc.complete in all respects. The instrument chamber

shall be separate and shall comprise of flush type

digital metering system for phase to phase voltage

and single phase voltage, current and other

20.1 parameters(KVA,P.F,KW etc) in each phase with

touch type selector switches for different readings,

instrument fuses, current transformer etc. The panel

board shall have suitable capacity electrolytic

alumininum busbars as per IS8623 or above

istulated with heat shrink sleeving and mounted on

non hygroscopic supports such as CMC/BMC

support with deteachable side covers and shall be

suitable for extension on the sides. The MCCB's

shall be complete with suitable cable end boxes,

compression glands and indicating lamp on

20.1.2 Incoming

200 Amp. MCCB-1 No

Digitally signed by VARUN

100 Amp. MCCB-2 Nos..+(63 AMP FPMCB-6NOS.) - UPS

63 Amp. MCCB-3 Nos.+(125 AMP. MCCB-2 NOS.+63 AMP

FPMCB-6NOS.) - EMERGENCY PANEL

20.1.4 Incoming

630 Amp. MCCB-1 No

100 Amp.MCCB-5 Nos.& 63 Amp.MCCB-2 Nos+(63 AMP

FPMCB-10 NOS.) - VRV POWER PANEL

200 Amp. MCCB-2 Nos. 100 Amp-MCCB-1 No& 63 Amp.

44 2 MCCB-2 Nos.+(200 AMP. MCCB-2 NOS.+63 AMP FPMCB- each 1 425302.00 425302.00

14 NOS.) - POWER PANEL

TOTAL A (SCHEDULED ITEM) IN RS. 22516144.80

Sub-Head : Non-Schedule Items

Supply & Fixing of 400mm sweep, wall mounted fan

complete with double ball bearing, motor, blades,

capacitor etc suitable for single phase 230 volts, 50 Hz.,

AC supply, complete as required.

Supply of AC 300mm Sweep, 230/250 Volts, 50 Hz

46 A.R. - 4 exhaust fan (Heavy Duty) with blades,cover,Louvers each 18 1232.00 22176.00

etc. complete as required.

Supply of Factory made 12 to 20 Watt LED Bulb

fitting,cool day light,(65000 K temp.) suitable for

Batton/Angle holder including making

connection.Complete in all respect.

Supply of LED Tube Light with batten suitable for up

to 1 X 10 watt LED tube light fitting including tube

on Surface complete in all respect.(2ft)

Supply of water tight oblong 10 Watt LED bulk head

luminaire having die cast housing with driver set

confirming to IP 65 and above Protection.Complete in all

Supply & Fixing of LAN socket outlet modular switch/

socket on the existing modular plate & switch box

including connections but excluding modular plate etc.

TOTAL B (NON-SCHEDULE ITEM) IN RS. 130228.00

TOTAL Say Rs. 226.47 Lacs

GRAND TOTAL ( FOR 1 BLOCK) Say Rs. 226.47 Lacs

GRAND TOTAL ( FOR 1 BLOCK) Say Rs. 226.47 Lacs

Digitally signed by VARUN

BILL OF QUANTITY (FIRE FIGHTING)

S.No. 25EM Description of Item

Code Unit Quantity Rate (Rs) Amount(Rs)

Sub-Head : FIRE DETECTION AND ALARM SYSTEM

28.2 INTELLIGENT FIRE ALARM

Supplying, installation, testing

and commissioning of micro

processor based intelligent

addressable main fire alarm

panel, central processing unit

with the following loop modules

and capable of supporting not

less than 240 devices (including

detectors) and minimum 120

detectors per loop and loop

length up to 2 km, network

communication card, minimum

320 character graphics/ LCD

display with touch screen or

other keypad and minimum

4000 events history log in the

non volatile memory (EPROM),

power supply unit (230 ± 5% V,

50 hz), 48 hrs back-up with 24

volt sealed maintenance free

batteries with automatic

28.2.1.2 Two Loop Panel.

28.2.2 Supplying, installation, testing

& commissioning of central

graphical fire alarm

management system to

centrally monitor and operate

the fire alarm system complete

Digitally signed by VARUN

28.2.4 Supplying, installation, testing

& commissioning of intelligent

analog addressable

photothermal detector

complete with mounting base

complete as required. No. 95.00 3004.00 285380.00

28.2.5 Supplying, installation, testing

& commissioning of response

indicator on surface/recessed

MS Box having two LED,

metallic cover complete with all

connections etc as required. No. 112.00 306.00 34272.00

28.2.7 Supplying, installation, testing

& commissioning of fault

isolator complete with base as

28.2.9 Supplying, installation, testing

& commissioning of intelligent

addressable thermal detector

with rate of rise cum fixed

tempreature thermistor

complete with base as required. No. 2.00 2866.00 5732.00

28.2.10 Supplying, installation, testing

& commissioning of

addressable fire control module

complete as required. No. 2.00 3156.00 6312.00

28.2.11 Supplying, installation, testing

& commissioning of

addressable phone control

module complete as required. No. 8.00 3432.00 27456.00

28.2.14 Supplying, installation, testing

& commissioning of

addressable manual call point

complete as required. No. 2.00 4063.00 8126.00

28.2.15 Supplying, installation, testing

& commissioning of

addressable horn cum strobe

complete as required. No. 2.00 3682.00 7364.00

Digitally signed by VARUN

28.2.16 Supplying, installation, testing

& commissioning of

addressable strobe complete as

28.2.17 Supplying, installation, testing

& commissioning of fire fighter

telephone handset complete as

28.2.19 Supplying, installation, testing

& commissioning of fire fighter

phone jack complete as

PUBLIC ADDRESS SYSTEM

28.3.1 Supplying, installation, testing

& commissioning of 6 zone,

voice alarm controller with USB,

MP3 player (including 6 zone

button paging station) with

seamless integration facility

with main fire alarm panel for

voice evacuation complete as

28.3.5 Supplying, installation, testing

& commissioning of 6 inches

dia, 2 watts, 70/100 volts ceiling

speaker complete as required. No. 24.00 1939.00 46536.00

ASPIRATION DETECTOR

CABLING & WIRING

Digitally signed by VARUN

28.5.1 Supplying & laying of 2x1.5

sqmm fire survival armoured

cable, 600/1000V rated with

annealed copper conductor

having glass mica fire barrier

tape covered by an extruded

layer of Cross Linkable Ethylene

Propylene Rubber (EPR)

insulation and LSZH inner

bedding, steel wire armouring &

LSZH outer sheath complete as

required. Metre 500.00 386.00 193000.00

28.5.3 Supplying and drawing of cable

Fire Retardant PVC insulated

copper conductor cable in the

existing surface / recessed

steel conduit of following pairs,

cores and size including

connections and

interconnections etc. as

28.5.3.1 speaker cable Single pair, 2-

28.5.4 Supplying and fixing 25 mm dia

MS flexible pipe with PVC

coating along with all

ancillaries and accessories like

coupler etc. as required. Metre 8.00 60.00 480.00

27.4.2 450 lpm at 35 m Head Set 91384.00

Digitally signed by VARUN

27.7 Providing, laying, testing &

commissioning of 'C' class

heavy duty MS pipe conforming

to IS 3589/IS 1239 including

Welding, fittings like elbows,

tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe

on the wall/ceiling with suitable

clamp/support frame and

painting with two or more coats

of synthetic enamel paint of

required shade complete as

27.9 Supplying and fixing single

headed internal hydrant valve

with instantaneous

Gunmetal/Stainless Steel

coupling of 63 mm dia with cast

iron wheel ISI marked

conforming to IS 5290 (Type -A)

with blank Gunmetal/Stainless

Steel cap and chain as required

27.9.2 Single headed Stainless steel

27.11 Supplying, fixing, testing and

commissioning of butterfly

valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI

marked complete with nuts,

bolts, washers, gaskets

conforming to IS 13095 of

following sizes as required :

Digitally signed by VARUN

27.12 Supplying, fixing, testing &

commissioning of double

flanged sluice valve of rating PN

1.6 with non rising spindle,

bronze/gun metal seat, ISI

marked complete with nuts,

bolts, washers, gaskets and

conforming to IS 780 of

following sizes as required :

27.12.4 80mm dia

27.13 Supplying and fixing orifice

plate made out of 6 mm thick

stainless steel (Grade 304) with

orifice of required size to be

fitted between flange & landing

valve of external and internal

hydrants to reduce pressure at

the outlet to the level of 3.5

kg/cm2 complete as required. No. 4.00 1424.00 5696.00

27.14 Providing, installation, testing

and commissioning of non-

return valve of following sizes

confirming to IS: 5312 complete

with rubber gasket, GI bolts,

nuts, washers etc.as required :

Digitally signed by VARUN

27.15 Providing, installation, testing

and commissioning of stainless

steel Y-strainer fabricated out

of 1.6 mm thick stainless steel,

Grade 304, sheet with 3 mm dia

holes with stainless steel

27.16 Supplying and fixing 63 mm dia,

15 m long RRL hose pipe with

63 mm dia male and female

couplings duly bound with GI

wire, rivets etc. conforming to

IS 636 (type-A) as required :

27.16.2 Stainless Steel (Grade 304)

27.17 Supplying and fixing first-aid

Hose Reel with MS construction

spray painted in post office red,

conforming to IS 884 complete

with the following as required.

20 mm nominal internal dia

water hose thermoplastic

(Textile reinforced) type -2 as

per IS: 12585 20 mm nominal

internal dia gun metal globe

valve & nozzle.

Drum and brackets for fixing the

equipmets on wall. Connections

from riser with 25 mm dia stop

gun metal valve & M.S. Pipe and

Digitally signed by VARUN

27.18 Supplying & fixing 63 mm dia

gun metal short branch pipe

with 20 mm nominal internal

diameter size nozzle conforming

to IS 903 suitable for

instantaneous connection to

interconnect hose pipe coupling

27.18.2 Stainless Steel (Grade 304)

27.19 Supplying and fixing of fire

brigade connection of cast iron

body with gun metal male

instantaneous inlet couplings

complete with cap and chain as

reqd. for suitable dia MS pipe

connection conforming to IS

904 as required :

27.19.1 2 way-100 mm dia M.S. Pipe

27.2 Supplying and fixing air vessel

made of 250 mm dia, 8 mm

thick MS sheet, 1200 mm in

height with air release valve on

top and flanged connection to

riser, drain arrangement with 25

mm dia gun metal wheel valve

with required accessories,

pressure gauge and

paintingwith synthetic enamel

paint of approved shade as

27.21 Providing, fixing, testing &

commissioning of 15mm dia

quartzoid bulb type sprinklers of

rating 68 degree centigrade

with required accessories :

27.21.1 Pendent Sprinkler

Digitally signed by VARUN

27.21.2 Upright Sprinkler

27.22 Providing & fixing of pressure

switch in M.S. pipe line

including connection etc. as

27.24 Providing, fixing, testing &

commissioning of installation

control valve of cast iron body,

brass/bronze working parts

comprising of water motor

alarm, bronze seat clapper,

clapper arm and hydraulically

driven mechanical gong bell to

sound continuous alarm when

the wet riser/sprinkler system

activates, pressure gauges,

emergency releases, strainer,

pressure switch, cock valve

complete with drain valve and

bypass, test control box, ball

valves, MS pipe of required size,

flanges, orifice plate, gasket

etc of follwing sizes as required

Digitally signed by VARUN

27.25 Supplying, installation, testing

& commissioning of sprinkler

flexible pipe (UL Listed) of

stainless steel complete with

15 NPT on reducer thread with

maximum working pressure of

175 PSI test pressure of 875 PSI

(Burst) with branch line (Inlet)

25mm NPT male thread to

sprinkler head (Outlet) 15mm

NPT female thread with

reducer, nipple, 2 side brackets,

center bracket, stockbar of

following sizes complete as

27.29 Providing, installation, testing &

commissioning of adjustable

rosette plate for 15mm dia in

white finish UL Listed or FM

approved complete as required. No. 158.00 264.00 41712.00

TOTAL A (SCHEDULED

FIRE EXTINGUISHERS

Supply and fixing of fire

extinguisher, ABC Type (ISI

Marked IS : 15683 & TAC

approved) complete with initial

charge and wall bracket,along

with supply of all materials and

labour for proper completion of

Digitally signed by VARUN

Supply and fixing of C02 type

fire extinguisher (ISI Marked IS :

2878 & TAC approved) complete

with initial charge and wall

bracket, along with supply of all

materials and labour for proper

completion of work.

Providing & fixing carbon steel

Fire Man Axe with rubber

insulated handle tested to

Supplying and installing at

approved location approved

make fire buckets of 24 gauge

galvanized steel sheet,

standard of round bottom

shape, painted white inside and

red outside and black on the

bottom, inscribed with letter

"FIRE" in black and gold. Cost

shall be inclusive of providing

MS stand duly painted over a

coat of primer (one stand shall

be suitable for hanging 5

1200x900 mm (Indoor Cabinet)

Only Frame Each 4.00 8766.00 35064.00

Digitally signed by VARUN

Providing and Fixing of Self

illuminated /Auto Glow Exit

Signs printed on photo-

luminescent sheet containing

self illuminated base

chemical,of appropriate size not

400x150mm,suspended from

ceilling or fixed to the walls

with accessories as riquired

and as directed at site. Each 8.00 3872.00 30976.00

Providing & fixing cast iron air

release valve of 25 mm dia

including 25 mm dia Ball valve

with fittings etc. as per the

requirement. Each 2.00 5687.00 11374.00

Providing and Fixing M.S

Structural Work fabricaed from

standard sections e.g MS

rounds, angles, channels

including cutting to size,

drilling, welding, fixing and

welding to insert plates in RCC

structural members as directed

by Engineer-in-Charge including

cutting and making good the

walls and floors (For sprinkler

Pipe support etc.).

Tie Road 10 mm Each 23 145.00 3310.83

TOTAL B (NON-

SCHEDULED ITEM) IN RS. 540835.83

TOTAL (A+B) 4624258.83

TOTAL Say Rs. 46.25 Lacs

GRAND TOTAL ( FOR 1

Say Rs. 46.25 Lacs

Digitally signed by VARUN

BILL OF QUANTITY (E&M WORKS)

S.No. PAR- Description of Item Unit Qty. RATE Amount In Rs.

1 4.0 LIFT WORK

Supply Installation , Testing & Commissioning of LIFTS

with power operated centre opening doors and AC

variable voltage & variable frequency control,car safety

& Governor, Guides, guide rails, ropes, car platform,

cabin finishes (stainless steel), car & landing doors

(stainless steel), hoist motors, braking system,

Automatic Rescue Device (ARD) etc. complete as per

the CPWD Specifications and realated IS standards upto

4.2.2 20 Passenger,1.5 mps,5 stops , 5 Openings SET 1 2909000.00 2909000.00

2 7.4 UNINTERRUPTED POWER SUPPLY

Supplying, installation, testing and commissioning of

online 3 phase UPS system with 30 minutes back up

including batteries, interconnecting cables, battery

3 7.6 VRV/ VRF AC System

Supplying, installation, testing and commissioning of

CPWD VRV/VRF system including indoor /outdoor units, piping,

PAR- electrical power distribution/wiring, electrical panel, HP 300 58480.00 17544000.00

2025 treated fresh air system etc.

4 7.1 CCTV SYSTEM

Supplying, installation, testing and commissioning of IP

basedCCTV system for building security comprising of

PTZ/ fixed camera, cabling, digital recording, HD display

systemwith minium display of 5" x 8" per camera and Per

hard ware software support - for indoors only (Rate Sqm

applicable on total plinth area but CCTV coverage shall

be limited to 15% of the total plinth area as per

5 7.11 ACCESS CONTROL SYSTEM

Supplying, installation, testing and commissioning

ofaccess control system for building security

7.11.1 comprising of controller, E&M locks, reader, smart 4850 220.00 1067000.00

cards, cabling, recording, display system, hardware and

software support as required

IBMS: INTEGRATED BUILDING MANAGEMENT SYSTEM

Supplying, installation, testing and commissioning of

integrated building management system for

digital/electronic display and monitoring of all E&M

systems like substation, DG sets, UPS, solar power, lifts,

7.12.1 AC plants, ventilation systems, fire protection systems, 2425 430.00 1042750.00

pumps etc. to include cabling, monitors, recording,

display system, hardware, software support (upto

10,000 sqm) (Rate applicable on total plinth area)

Digitally signed by VARUN

Supplying, installation, testing and commissioning of

LAN system comprising of core switches & L2 switches

with 10 G , 10 giga SFP modules , WIFI accesss point , Per

WIFI controller , network management, software, racks, Sqm

, CAT 6 A cable , patch panels, OFC etc.

Supplying , installation, testing and commissioning of IP

based EPABX system comprising of core switches & L2

switches with 10G, 10 giga SFP modules , industry

standard appliance server , cloud based , enterprise Per

grade UC solution , MID/ENTRY level IP/SIP phone with , Sqm

dual 1 gig ports , racks, CAT 6A, cable , Patch panels ,

7 7.27 EMERGENCY LIGHT & ILLUMINATED SIGNAGES

Addressable emergency lights and illuminated signages Per

Cost of Unit Say Rs. 291.55 Lacs

GRAND TOTAL ( FOR 1 BLOCK) Say Rs. 291.55 Lacs

GRAND TOTAL ( FOR 1 BLOCK) Say Rs. 291.55 Lacs

Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

HVAC ESTIMATE FOR LAB BUILDING , POTATO CENTRE AT AGRA

BILL OF QUANTITIES

PART - I : AIR CONDITIONING SYSTEM

9) NSI INLINE FAN (FRESH AIR / EXHAUST AIR FOR AIR CONDITIONED AREAS)

Supply, installation, testing and commissioning of Round / Cabinet type rectangular

Inline fans with motor complete motor complete with TEFC Sq. Cage Induction

motor suitable for 220 volts ± 10%, 50Hz ± 3 %, single phase A.C supply of class

"F" insulation with , mountings accessories in all respect with wiring upto power

supply point & of following capacities as per specification and tender drawing

10) NSI Plastic Propeller Fans

Supply, installation, testing and commissioning of propeller exhaust fans of various

capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply

complete with gravity louvers & speed regulator etc. (Plastic propeller fan considered in

electrical scope, quantity is take for rate only if required).

14) NSI Fan Section to for Exhaust / Supply

Supply, installation, testing and commissioning of factory fabricated Double

Skinned fan section unit floor mounted type fabricated out of extruded

aluminium section with 0.6mm pre-plasticized / pre-coated Galvanised steel sheet

outside & 0.6 mm plain Galvanised steel sheet inside with blower, blower section

and blower motor TEFC (Motor Efficiency IE3) type suitable for operation on 415

volts ± 10%, 50 Hz ± 5% AC supply, belt drive package.

600 CFM, 1 x 380 mm Dia. Fan, 1 x 1.0 Kw Fan Motor, 35 mm St. Pressure,

Monoblock Pump For Exhaust

700 CFM, 1 x 380 mm Dia. Fan, 1 x 2.5 Kw Fan Motor, 35 mm St. Pressure,

Monoblock Pump For Exhaust

AHU & THEIR CONTROLS

Double Skin Air Handling Unit

15) NSI AIR HANDLING UNIT C/S OR F/M OR TFA UNIT (CC+ MERV 8 Filter+ EAC Filter

Double Skin Floor Mounted AHU (CC+ MERV 8 Filter + UV Section): Supply,

installation, testing and commissioning of factory fabricated Double Skinned

Chilled Water Eurovent certfied (Leakage class L1, Casing strength class D1,

Thermal transmittance class T2, Thermal Bridging factor TB2) Air- handling unit Floor

mounted Horizontal & Vertical type/ Ceiling Suspended , fabricated out of extruded

aluminium section with 0.8mm pre-plasticized / pre-coated Galvanised steel sheet

outside & 0.8 mm plain Galvanised steel sheet inside complete with blower section

with single / multiple AMCA certifed Backward Curve Aerofoil design blades Non

mettalic EC Bluefin fans, Smart VSD controller with ready BMS configuration an

Digital I/O points,Auto RPM Modulation based on set parametrs either constant

Airflow/Constant Temperature, MODBUs enabled controller,Fire integration setting,

Fan ON/Off Status,Scheduling facilty to Auto On/off based on set timing,IOT

functionality for future integration to access from any point with internet power control

panel with necessary switchgears incoming & outgoing, blower suitable for static

pressure as required (Fan Static given below is for guideline), blower motor TEFC

(IE5) type and IP55 suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC

supply,, 4 Row cooling coil & 2 Row Heating Coil made of Aluminium finned Copper

tube with coil section, Copper Header, pre-filter section with non woven synthetic

media MERV 8 & filters in extruded aluminium frame, polished stainless steel drain

pan made out of 22 G sheet duly insulated etc. without face and bypass dampers.

System should be designed keeping in mind opeartioonal energy efficienct

methodology so that it should not consume more than 0.188 watts per cfm.

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

The AHU panels shall be insulated with 50mm thick of 40 Kg/m³ density PUF &

shall have thermal break profile. The motor & blower assembly shall be mounted

on Aluminium extruded section only. The complete AHU shall conform to

standard specication. The face velocity across coil shall be limited to 137 MPM

a) NSI 3,500 CFM, C/S AHU 65 mm St. Pr., 6 Row CC, 3 Row HC, With MERV-14 Nos. 1.00 4,10,000 4,10,000

b) NSI 4,000 CFM, C/S AHU 65 mm St. Pr., 6 Row CC, 3 Row HC, With MERV-14 Nos. 1.00 4,75,000 4,75,000

c) NSI 4,000 CFM, F/M AHU 120 mm St. Pr., 6 Row CC, 3 HC, With MERV-14 Nos. 1.00 5,10,000 5,10,000

d) NSI 3,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, 3 Row HC, With MERV-14 Nos. 2.00 4,10,000 8,20,000

e) NSI 6,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, 3 Row HC, With MERV-14 Nos. 1.00 6,55,000 6,55,000

f) NSI 7,000 CFM, F/M AHU 65 mm St. Pr., 6 Row CC, 3 Row HC, With MERV-14 Nos. 1.00 6,95,000 6,95,000

17) NSI DOUBLE SKIN FLOOR MOUNTED AHU (FOR 100% FRESH AIR)

Supply, installation, testing and commissioning of factory fabricated Double

Skinned Chilled Water Air- handling unit fabricated out of extruded aluminium section

with 0.8mm pre- plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm

polished SS sheet inside complete with supply & exhaust blower section with single /

multiple AMCA certified forward/backward curved DIDW fan with aerofoil design

blades, VFD with built in harmonic filters for both supply & exhaust fan motor, power

control panel with necessary switchgears incoming & outgoing for VFD, HRW &

humidifier, blower suitable for static pressure as required (Fan Static given below is

for guideline), blower motor TEFC (IE3) type suitable for operation on 415 volts ±

10%, 50 Hz ± 5% AC supply, 8 row cooling & 2 row heating coil made of Aluminium

finned Copper tube, Copper header with coil section, pre-filter section with non

woven synthetic media MERV 8 filters in extruded aluminium frame in both the supply

& exhaust side of AHU, fine filter section with MERV 13 filters in extruded aluminium

frame in supply after fan, (Hepa filters shall be at terminals along with laminar flow

plenum & not to be included in the cost), Heat Recovery Wheel with HRW Section,

mixing chamber,

UV section only of 600 mm in length in floor & ceiling mounted AHU (UV System

quantified separately), polished stainless steel drain pan made out of 22 G sheet

duly insulated etc. without face and bypass dampers. The AHU panels shall be

insulated with 48mm thick & 36 Kg/m³ density PU foam & shall have thermal break.

The motor & blower assembly shall be mounted on Aluminium extruded section

only. These AHUs shall have air inlet / outlet connection made of aluminium 20 G

& all fixing arrangement / blank off shall be of SS The complete AHU shall

conform to standard specication. The face velocity across cooling / heating coil

shall be limited to 152 MPM maxm. The static pressure given below is for guidance

only actual shall be as per shop drawings. The capacity of Air-handlers shall be as

(10,000 CFM Supply Air Blower, 8 Row CC, 3 Row HC, 65 mm St. Pr., 10,000 CFM

Ex. Air Blower, 40 mm St. Pr. with other accessories as specified above)

18) NSI CHILLED WATER CASSETTE UNIT

Supply ,Installation ,Testing & commissioning of GI powder coated Chilled water

Cassette units complete with fan, 3 speed motor 220 volt, 3 row deep cooling coil,

aluminium filters with filter box, double sandwitched insulated tray, copper

connection, rotary switch, supporting arrangement, electrical wiring etc. The fan

shall be selected for 06 mm static pressure inciuding auxiliary drain pan. The

complete fan coil unit shall be in line with the standard specification. The capacity of

Chilled water Cassette units shall be as follows:

a) NSI 2.0 TR, 6 mm external static Nos. 21.00 27,500 5,77,500

b) NSI 2.5 TR, 6 mm external static Nos. 20.00 30,500 6,10,000

c) NSI 3.0 TR, 6 mm external static Nos. 5.00 32,500 1,62,500

19) NSI AUTOMATIC CONTROLS FOR FCU INSULATED VALVE KIT FOR CASSETTE

Supply, installation, testing and commissioning of automatic control for Hydronic

Cassette Units / fan coil unit consisting of two way motorised on/off valve, isolation

valves, strainer, balancing valve, wired remote control, which will have provision of

setting of room temperature, setting of fan speed (High, Medium, Low). The quoted

price shall include the cost of 20mm MS conduits, control cabling, MS Box etc as

20) NSI DIGITAL DISPLAY TYPE THERMOSTAT FOR AHU

Supply, installation, testing and commissioning of Proportional cooling / heating,

digital display, communicating type thermostat at air-handler. Temperature Sensor

for AHUs are also specified in BMS Part. Thermostat shall be installed in case BMS

commissioning is significantly delayed.

21) NSI FOR ALL OT AHU (T + RH CONTROL)

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

Supply, installation, testing and commissioning of digital display, communicating

type thermostat with humidistat for various air handling Units. The thermostat with

built in / individual humidistat shall have provision of setting of space temperature &

RH and shall display the both. The quoted price of thermostat / humidistat shall

include the cost of 20mm MS conduits, control cabling, MS Box etc as required.

Temperature + RH Sensor for AHUs are also specified in BMS Part. Thermostat with

built in humidistat shall be installed in case BMS commissioning is significantly

21A) NSI Digital air pressure differential meters Nos. 40.00 4,500 1,80,000

SUB HEAD - "B" : PLUMBING

22) SI INSULATED CHILLED WATER PIPING (EXPANDED POLYSTRENE INULATION)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of

chilled water piping plumbing inside the building (with necessary clamps, vibration

isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with

fire retardant quality expanded polystrene moulded pipe section of density 20

kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with

500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding

complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date

) at joints repairing of damage to building etc. as per specifications and as required

complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C'

class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe

heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto

350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and

23) SI INSULATED CHILLED WATER PIPING (NITRILE RUBBER INULATION)

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of

chilled water piping inside the building (with necessary clamps, vibration isolators

and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80

kg/cum density resin bonded fiber glass or 144 Kg/ cu m density mineral wool (non

Combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene

sheet (vapour barrier) and finally applying 0.63mm aluminium sheet cladding

complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date

) at joints and repairing of damage to building etc. as per specifications and as

required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS :

1239 and pipes size above 150mm shall be welded black steel pipe heavy class as

per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia.

and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

a) 16.2.14 25 mm dia (19 mm Thick inulation) RMT. 0.00 625 -

b) 16.2.13 32 mm dia (19 mm Thick inulation) RMT. 70.00 750 52,500

c) 16.2.12 40 mm dia (32 mm Thick inulation) RMT. 60.00 919 55,140

d) 16.2.11 50 mm dia (32 mm Thick inulation) RMT. 85.00 1,111 94,435

e) 16.2.10 65 mm dia (32 mm Thick inulation) RMT. 90.00 1,247 1,12,230

f) 16.2.9 80 mm dia (32 mm Thick inulation) RMT. 100.00 1,554 1,55,400

g) 16.2.8 100 mm dia (32 mm Thick inulation) RMT. 90.00 2,061 1,85,490

h) 16.2.7 125 mm dia (32 mm Thick inulation) RMT. 0.00 2,590 -

i) 16.2.6 150 mm dia (32 mm Thick inulation) RMT. 0.00 2,915 -

j) 16.2.5 200 mm dia (32 mm Thick inulation) RMT. 0.00 4,367 -

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

VALVES & STRAINER IN CHILLED WATER LINE

Supplying, fixing, testing and commissioning in position of following valves, strainers,

guages in the chilled water plumbing confirming to PN 16 pressure rating, duly

insulated to the same specifications as the connected piping & adequately supported

as per specifications.

24) SI BUTTERFLY VALVES / GLOBE VALVE

Supply, fixing, testing and commissioning of Butterfly valves with CI body SS Disc,

Nitrile Rubber Seal & O-Ring PN-16 pressure rating for chilled water /hot water

circulation complete with companion flanges, nuts, bolts, gaskets etc. as specified

and position confirming to standard specification

25) SI MOTORIZED BUTTERFLY VALVE

Supply, installation, testing and commissioning of following sizes: Motorized

Butterfly valves with CI Body, SS Disc , O - ring and minimum, PN-16 pressure

rating , confirming to BS 5155,IS 13095, with IP-55 actuator,capable of accepting

upto 10 V DC, and upto 20 mA electric signal and providing similar transduced

feedback output to control system as required. with Insulation

26) SI BALANCING VALVES WITH BUILTIN MEASURING FACILITY

Supply, installation, testing & commissioning of Balancing valves with builtin

measuring facility with C I body flanged construction with EPDM coated disc with

long pitch with protectedout pipe insulation & PN 16 pressure rating for chilled /hot

water circulation as specified. in position conforming to standard specification.

27) SI NON RETURN AIR VAVLVE (NRV)

Supply, installation, testing & commissioning of Non Return Valve (NRV) with duel

plate of C I body SS plates vulcanised NBR seal flanged end & PN 16 pressure

rating for chilled / hot water circulation including insulation as specified.in position

conforming to standard specification.

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

28) SI / NSI Y-TYPE STRAINERS

Supply,installation,testing and commissining of Ductile CI Body flanged ends "Y"

type strainers with stainless steel strainer for chilled / hot water circulation including

insulation as specified. in position confirming to standard specification.

29) SI PRESSURE INDEPENDENT TYPE BALANCING VALVE (PIBC)

Supply, installation, testing & commissioning of following sizes electronic,self -

balancing, pressure independent type dynamic balancing valve with integrated 2

Way modulating control valve in a single body.The actuator shall be capable of

accepting upto 10 V DC upto 20 mA electric signal and shall provide similar

transduced feedback output to control system.Maximum close off pressure shall not

be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves

should have pressure rating of 25 Bar minimum.

30) NSI CONDENSATE DRAIN PIPING WITH NITRILE RUBBER INSULATION

Supply, installation, testing and commissioning of condensate drain water piping

of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends,

MS flanges, supports, welding, painting etc. as required conforming to tender

specifications and of following sizes. Complete pipe shall be duly insulated with

Closed Cell Elastomeric Nitrile Rubber of specified pipe section of specified

thickness in the tender specification & suitable for indoor / outdoor application.

Complete pipe insulation shall also have 200 g/m² factory laminated, treated woven

Glass Cloth coating for mechanical and UV protection

31) SI CONDENSER WATER PIPING

Supplying, fixing, testing and commissioning of condenser water pipes of following

sizes of MS 'C' class along with necessary clamps, vibration isolators and fittings

such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately

supported on rigid supports duly painted/buried in ground excavation and refilling etc.

as per specification and as required complete in all respect.

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

Note:-The Pipes size 150mm & below shall be M.S. 'C' class as per IS : 1239 and

pipes size above 150mm shall be welded black steel pipe heavy class as per

IS:3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And

from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

VALVES & STRAINER IN CONDENSER WATER LINE

Supplying, fixing, testing and commissioning in position of following valves, strainers,

guages in the Condenser water plumbing confirming to PN16 pressure rating as the

connected piping and adequately supported as per specifications.

32) BUTTERFLY VALVE

Supply, installation, testing and commissioning of following sizes: Butterfly valves

with CI Body,SS Disc , O - ring and minimum, PN-16 pressure rating , confirming to

BS 5155,IS 13095, with IP-55 actuator,capable of accepting upto 10 V DC, and upto

20 mA electric signal and providing similar transduced feedback output to control

system as required.

33) MOTORIZED BUTTERFLY VALVES

Supply, installation, testing and commissioning of following sizes: Motorized

Butterfly valves with CI Body,SS Disc , O - ring and minimum, PN-16 pressure

rating , confirming to BS 5155,IS 13095, with IP-55 actuator,capable of accepting

upto 10 V DC, and upto 20 mA electric signal and providing similar transduced

feedback output to control system as required.

34) BALANCING VALVES

Supply, installation, testing & commissioning of Balancing valves with builtin

measuring facility with C I body flanged construction with EPDM coated disc with

long pitch with protectedout pipe insulation & PN 16 pressure rating for chilled /hot

water circulation as specified. in position conforming to standard specification.

Supply, installation, testing and commissioning of Dual plate type check valves

(NRV) in position conforming to standard specification.

36) Y TYPE STRAINER

Supply,installation,testing and commissining of Ductile CI Body flanged ends "Y"

type strainers with stainless steel strainer for chilled / hot water circulation including

insulation as specified. in position confirming to standard specification.

37) BALL VALVES

Supply, Installation,testing & commissioning of Ball valves(full open port type)

complete with heavy duty minimum PN16 bronze forged body, chrome plated bronze

ball and control level etc.& position confirming to standard specification.

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

38) WATER FLOW SWITCH

NSI Supply, installation, testing and commissioning of water flow switch of approved

make conforming to techinical specifications.

39) AUTO AIR VENT VALVES

Supply, installation, testing and commissioning of auto air vent valve with cock or

ball valve of following sizes:-

a) NSI 15 mm dia auto air vent valve Nos. 2.00 947 - 1,894 -

b) NSI 20 mm dia auto air vent valve Nos. 0.00 950 - - -

40) AIR SEPARATOR

Supply, Installation, Testing, & Commissioning of centrifugal type sediment Air

separator with strainer, auto air purging arrangement complete duly insulated as

required and as per specifications.

41) POT STRAINER

Supply, installation, testing & commissioning of Pot - Strainer of the following

sizes conforming to standard specification.

42) THERMOMETER

a) NSI Supply, installation, testing and commissioning of Mercury filled 'V' form

thermometer with copper well of approved make conforming to technical Nos. 34.00 1,275 - 43,350 -

specifications.

43) PRESSURE GUAGE

a) NSI Supply, installation, testing and commissioning of pressure guage with

appropriate range with cock valve ( isolate ball valve) of approved make of dia 150 Nos. 34.00 1,475 - 50,150 -

mm conforming to techinical specifications.

SUB HEAD - "C" : DUCTING , GRILLES & INSULATION

44) RECTENGULAR / SQUARE DUCTING (FACTORY FABRICATED)

Supply, fabrication, installation, balancing and commissioning of factory fabricated

G.S.S.sheet metal rectangular /round ducting complete with neoprene rubber

gaskets,elbows,splitter dampers,vanes,hangers,supports etc. as per approved

drawings and specifications of following sheet thickness complete as required. as per

SMACNA Standards specifications & tender drawings. ed rod & GI slotted hannel

including nut bolt fastner or MS angle plate & MS rod including nut bolt

fastner,sealent (neoprene gasket),access door etc.

d) 16.12.1.4 18 G (Thickness1.25mm sheet) SMT 0.00 1,677 - -

45) RECTANGULAR / SQUARE DUCTING (SITE FABRICATED)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet

metal rectangular / round ducting complete with neoprene rubber gaskets, elbows,

splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required. as per SMACNA

Standards specifications & tender drawings. ed rod & GI slotted hannel including

nut bolt fastner or MS angle plate & MS rod including nut bolt fastner,sealent

(neoprene gasket),access door etc.

46) VOLUME CONTROL DAMPER

a) 16.13 Supply, installation, testing and commissioning of GI volume control duct damper

complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as SMT 25.00 6,500 - 1,62,500

per specifications.

47) FIRE DAMPER

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

a) 16.20.1 Supply,Fixing, testing & commissioning of fire dampers in supply air duct/ main

branch and return air path as and where required of required sizes i/c control

wiring,the damper shall be motorized and spring return so as to close the damper in

the event of power failure automatically and open the same in case of power being SMT 18.00 9,883 - 1,77,894

restored.The spring return action shall be in built mechanism and not externally

mounted.The damper shall also be closed in the event of fire signal complete as

required and as per specifications.

49) SUPPLY AIR GRILLES WITH VCD

a) 16.15 Supply & fixing of powder coated extruded aluminium Supply Air Grills with

aluminium volume control dampers as per specifications.

50) RETURN AIR GRILLES WITHOUT VCD

a) 16.16 Supply & fixing of powder coated extruded aluminium Return Air Grills with louvers

but without volume control dampers as per specifications.

51) SUPPLY AIR DIFFUSER WITH VCD

a) 16.17 Supply, fixing testing commisioning of Supply air diffusers of powder coated

aluminium with aluminium volume control dampers with anti smudge ring & SMT 3.00 11,363 - 34,089

removable core.

52) SUPPLY AIR DIFFUSER WITHOUT VCD

a) 16.18 Supply, fixing testing commisioning of Return air diffusers of powder coated

aluminium without aluminium volume control dampers with anti smudge ring & SMT 3.00 7,559 - 22,677

removable core.

53) FRESH / EXHAUST LOUVER WITH BIRD SCREEN

a) NSI Supplying & fixing of 18 G thick Aluminium extruded powder coated Fresh / Exhaust

air weather protected louvers with bird screen type (with Aluminium frames if

required) for ventilation with 12G GI wire mesh as per specification and sizes will

be as per tender drawing mentioned.

54) ALUMINIUM DUCTING

a) Supply, fabrication, installation & testing of Aluminium sheet metal ducting duly

silicon sealed & as per tender drawings.The price shall include with supports such

as full threaded rod & GI slotted channel including nut bolt fastner , access door etc.

54) LAMINAR AIR FLOW PLENUM

NSI Supply, installation & testing of Laminar air flow pattern perforated plenum made of

18 G aluminium sheet Front faces Powder coated suitable for operation theatre with SMT 20.00 2,850 - 57,000 -

all accessories & of suitable size.

55) LAMINAR AIR FLOW DIFFUSER

Supply, installation, testing & commissioning of Front faces Powder coated 18 G

thick Aluminium extruded Laminar Flow diffusers with perforated face 50% approx.

and front face openable hinged type for Clean room supply air

56) FLEXIBLE DUCT

Supply, installation, testing & commissioning of thermal insulated flexible duct of

following sizes duly supported at regular interval as per site requirement etc.

complete as required as per specifications.

INSULATION WORKS

57) DUCT INSULATION (NITRILE RUBBER)

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

Supplying and fixing of following thickness duly laminated aluminium foil of mat finish

closed cell Nitrile rubber (Class"O") insulation on existing duct after applying suitable

adhesive for Nitrile rubber. Thejoints shall be 50 mm wide and 3 mm thick self

adhesive nitrile rubber tape insulation complete as per specifications and as

16.23.1 19 mm thick for Supply Air Duct SMT 1350.00 - 697 - 9,40,950

16.23.2 25 mm thick for Return Air Duct SMT 170.00 - 896 - 1,52,320

58) DUCT ACOUSTIC INSULATION

NSI Supply and Application of internal acoustic lining of supply air ducting using open cell

nitrile rubber insulation with density within 140-180 Kg/m3 as per the approved shop

drawings and specifications. Insulation material shall be bonded with the ducts using

metal screw and washers to facilitate grip to the GI sheet.

59) ACOUSTIC INSULATION OF AHU ROOM

NSI Supply and Application of acoustic/ thermal lining of walls/ ceiling of AHU rooms

using resin bonded fibre glass insulation of density not less than 32Kg/CuM as per

the approved shop drawings and specifications. Quoted price shall be inclusive of SMT 660.00 850 - 5,61,000 -

GSS channel, metal screws, washers, fibre glass tissue, perforated aluminium sheet

of 24G etc. as required for complete installation.

UNDED DECK INSULATION

60) NSI Supplying & fixing of Underdeck insulation on RCC slab ceiling with approved

sample of Class "O" closed cell Nitrile Rubber Insulation with 25 mm Thickness &

density 40-55 Kg/Cum .Thermal Conductivity not exceeding 0.035 W/mK at an

average Temperature of 0°C. Material shall have fire performance acc. to BS 476 SMT 1215.00 750 - 9,11,250 -

Part 7 & Part 6, water vapour diffusion resistance ( μ factor ) shall be greater than

7000 & tested from third party for the parameteres.Insulation material shall be factory

laminated with Aluminium Foil

SUB HEAD - "D" : ELECTRICAL PANEL & DISTRIBUTION

61) NSI Panel-1 (Plant Room Panel)

Incoming(1 Nos):

1000 Amp 4-Pole MDO ACB, 50-65kA with thermal magnetic based O/L, S/C and

Multifunction meter and 2000/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamps with 2A control MCBs.

2500A, TPN Aluminium, colour coded bus bars suitable for 415V, 50Hz. (After

(a) 1 Nos-3 Pole MCBs 25 A

(b) 9 Nos-3 Pole MCBs 32 A

(c) 6 Nos-3 Pole MCCBs 63 A

(d) 3 Nos-4 Pole MCCBs 100 A

(e) 6 Nos-4 Pole MCCBs 320 A

(f) 2 nos.spare -3 Pole MCCBs 200 A

(f) 3 nos.spare -3 Pole MCCBs 63 A

DOL/Star Delta Starter of following rating with Auto/ Manual selector switch,

MPCB/MCCB, over load relay, single phasing preventor, ON/OFF/ Trip indication

lamps, Ammeters with CTs, ON/OFF push Buttons, contractor and suitable No. of

Potential free contacts for remote / local operations, indication, interlocking with

Fire Alarm panel and Building Management system. (Starter shall have

MPCB/MCCB in the incomer as per type -2 coordination for fuseless type feeders.)

12 Nos. 5.6 kW Star Delta Starter

3 Nos. 15.0 kW Star Delta Starter

3 Nos. 22.2 kW Star Delta Starter

3 Nos. 200 kW Star Delta Starter

3 Nos. 250 kW Star Delta Starter

2 Nos. 200 kW Star Delta Starter spare

2 Nos. 63 kW MCB SPARE

1) Provision for VFD shall be provided in the starter panels.

65) NSI Panel-1 (1 Nos. floor HVAC panel)

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

Incoming(1 Nos):

80 Amp 4-Pole MCCB, 50kA with thermal magnetic based O/L, S/C and E/F

Multifunction meter and 80/5A, CL-1, 10VA CTs and 2A control MCB.

Sets of phase indicating lamps with 2A control MCBs.

100A, TPN Aluminium, colour coded bus bars suitable for 415V, 50Hz. (After

(a) 1 Nos-3 Pole MCBs 16 A

(b) 1 Nos-3 Pole MCBs 25 A

(c) 3 Nos-4 Pole MCCBs 25 A Spare Set 1.00 3,45,000 - 3,45,000 -

81) NSI Power & Control Cabling

A) Supply, laying, testing and commissioning of power and control cabling as per

specification given in the tender. Power cabling of XLPE insulated Aluminium

conductor armoured cables of 1.1 KV Grade including cable end termination with

brass compression glands & aluminium lugs etc as per specification. It shall conform

to DBR & NIIT specification.

a) i) For Chiller

b) ii) For Condenser Water Pumps

c) iii) For Chilled Water Primary Pumps

d) iv) For Chilled Water Secondary Pumps

e) v) For Cooling Towers

f) vi) For Hot Water Generator

g) vii) For Hot Water Pumps

h) viii) For Fan Motor - Up to 3.70 Kw

i) ix) For Fan Motor - Up to 5.6 Kw

j) x) For Fan Motor - 7.46 Kw

k) xi) For Fan Motor - 9.33 / 11.19 Kw

l) xii) For AHU Fan Motor - 15.00 / 18.65 Kw

m) xiii) For HRW & Humidifier of 1.50 / 3.00 Kw

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

n) xiv) For main Building panel to floor Panel

xv) For Single Phase Equipment (Note: All single phase equipment power

o) supply will be catered by AC socket Provided by the electrical contractor)

1 x 3C x 2.5 Sq. mm Copper Flexible Cable RMT. 500.00 120 - 60,000 -

1 x 3C x 4.0 Sq. mm Copper Flexible Cable RMT. 100.00 150 - 15,000 -

B) Control cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured

p) cable). It shall conform to DBR & NIIT specification.

q) C) Transmission & Control Wiring For VRV / VAV System

Providing & fixing of control cum trans-mission wiring of copper between indoor

and out door unit in 25 mm PVC Conduit. It shall conform to DBR & NIIT

82) NSI Earthing Strip / Wires as per specs.

i) Supply & laying of 32 x 6 mm GI strip recess / surface as strip earth lead

including soldering etc. as required. It shall conform to DBR & NIIT specification. RMT. 0.00 283 - - -

5.15 ii) Supply & laying of 25 x 6 mm GI strip recess / surface as strip earth lead

including soldering etc. as required. It shall conform to DBR & NIIT specification. RMT. 100.00 - 206 - 20,600

iii) Supply & laying of 8 SWG GI wire or in recess for loop earthing as required. It

shall conform to DBR & NIIT specification.

5.16 iv) Supply & laying of 6 SWG GI wire or in recess for loop earthing as required. It

shall conform to DBR & NIIT specification.

v) Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS

15652-2006. It shall conform to DBR & NIIT specification.

83) NSI Cable Tray

Supplying and installing following size of perforated GI cable trays including bends.

tee, reducers etc with perforation not more than 17.5%, in convenient sections, joined

with connectors, suspended from the ceiling with GI suspenders including bolts &

nuts, suspenders etc as required. It shall conform to DBR & NIIT specification.

4.6.1 100 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 50.00 - 599 - 29,950

4.6.2 150 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 50.00 - 544 - 27,200

4.6.4 300 mm wide x 50 mm depth x 1.6 mm thickness. RMT. 15.50 - 875 - 13,563

4.6.6 450 mm wide x 50 mm depth x 2.0 mm thickness. RMT. 0.00 - 1213 - -

4.6.7 600 mm wide x 50 mm depth x 2.0 mm thickness. RMT. 0.00 - 1646 - -

84) NSI Single Phase MCB for FCU / Fan / VRV IDU

Supply, installation, testing and commissioning of Single Phase MCB of following

capacities. It shall conform to DBR & NIIT specification.

All Toilet ventilation is in the electrical scope. But Fan size will be considered

as per HVAC calculation

ARCH-EN DESIGN Digitally signed by VARUN

Sl. DSR 2018 TOTAL

No. /NSI Description Unit

NSI RATE SI Rate NSI AMOUNT SI AMOUNT

Power supply to the main building HVAC panel shall be scope in the electircal

All single phase FCU power supply will be connected through socket provided

by the electrical power provision

The AC contractor shall provide fire shunt relay contact in his panel wherever

necessary along with auto / manual mode selector switch in the outgoing

feeder to take fire input signal (Potential Free Contact). Cost shall be included

in the panel price quoted by him.

ARCH-EN DESIGN Digitally signed by VARUN

Subject :-PROPOSED CONSTRUCTION OF INTERNATIONAL POTATO CENTER, AGRA, UTTAR PRADESH

Item Description Unit Qty Unit Rate Total Ref Image

RECEPTION TABLE

MODEL: RECEPTION -3

OVERALL SIZE:4800W X 750D X 1050HT

SIZE:2400WX750DX1050HT (QTY-2)

PEDESTAL:400WX450DX600HT (QTY-1)

Reception table : The overall size of the reception table shall be 2400 mm length, 750 mm depth & 1050 mm height. On the front side

both ends shall be provided with groove design strips to enhance the overall look. At the centre of the front side L shape surface shall be

provided fixed up with hinges to paste logo of the University. The entire table shall be made up of 25mm / 18mm thick pre laminated

particle board of E1 norms. Inside of table a working height shelf should be provided or height 750 mm to keep desktop/ laptop and

normal working with sitting. the edges of the visible surface shall be sealed with 2mm thick PVC lipping on automatic machine. Unless

1 specified tolerance of +/- 5mm to be considered for product dimensions Length, Depth & height and tolerance of 5% to be considered in Set 1 ₹ 2,16,925.00 ₹ 2,16,925.00

thickness & size of material & components used.

Mobile Drawer Unit : It shall be of size of 400 x 450 x 600 (WDH) mm made up of 18mm thick Pre-laminate particle board as per E1

norms and its edges duly sealed with 2mm PVC Lipping on automatic machine at visible sides. Drawer front & sides shall be made up of

18mm, back 9 mm thick pre laminated particle board of E1 grade with visible edges sealed with 2mm PVC edge band. The drawer side

surface shall be provided with finger groove handle-less design. Finger groove shall be created by providing a reverse tapered profile edge

of 6mm straight surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic

machine. Suitable lock shall be provided. Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and

tolerance of 5% to be considered in pipe thickness & Pipe sizes.The OEM shall have ISO 9001, BIFMA Level 2, Green Guard UL Gold

Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

SIZE:1650WX600DX1050HT

The overall size of Medium height storage shall be 16500 x 600 x 1050 (WDH) mm. Top shall be made up of 18mm thick pre laminated

particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters

shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable

2 shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove No's 1 ₹ 22,500.00 ₹ 22,500.00

handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam

Lock faciltity should be provided for safe storage of documents. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard UL Gold

Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

SIZE:1200WX600DX1050HT- 4NO'S

The overall size of Medium height storage shall be 1200 x 600 x 1050 (WDH) mm. Top shall be made up of 18mm thick pre laminated

particle board E1 norms and Back shall be made up of 9 mm thick pre laminated particle board with 2mm PVC edge lipping, Shutters

shall be made up of 18 mm thick pre laminated particle board. Shutters to be provied for compartment. The storage shall have adjustable

3 shelf. Edge: All exposed shall be sealed with 2mm thick PVC edge lipping. The hinged doors top shall be provided with finger groove Set 1 ₹ 65,450.00 ₹ 65,450.00

handle-less design for a streamlined look. Finger groove shall be created by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside @ 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine. Cam

Lock faciltity should be provided for safe storage of documents. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard UL Gold

Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

The overall size of Chair height shall be 950 – 1050 mm, Seat width : 480 mm, Back height- 545 mm, Back width: 425 mm, Seat depth :

450 mm, Seat height : 430– 530 mm. Seat should be made up of foam pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50%

deflection conforming to IS 3400. Seat shall be upholstered with micro fabric 100% polyster 180 GSM abrasion > 50000 cycles. No

flamming or progressive smoldering within one hour of placement of the cigarettes. Fire rated fabric confirming to BS EN 1021 (match)

should be used. The chair shall be supplied with Mesh at the back rest. The back frame shall be made up of injection molded PPGF. Chair

back shall connected to two directional adjustable Polypropylene lumbar support for achieving comfortable seating posture. The Chair

should be provided with synchro mechanism with single lever with one position lock. The mechanism shall allow 360 degree revolving

feature along with height adjustablility one Way with height adjustment & arm top shall be PU material. The Gas Lift used shall be class 4

tested as per ANSI BIFMA standards. Nylon Base to be provied. Twin castors 50 mm dia with PA6 material complying to ANSI/ BIFMA

X 5.1 2017 standards. The base shall be 660 mm PCD (26 inches) five pronged bases made up of PA6, 30% glass filled reinforced with

bottom ribbing for additional buttress and strength. Tolerance of +/- 5mm to be considered for dimensions Length, Depth & height and

tolerance of 5% to be considered in thickness.Tolerance of +/- 5mm to be considered for product sizes i.e Length, Depth & height and

tolerance of 5% to be considered in pipe thickness & Pipe sizes.The OEM shall have ISO 9001, BIFMA Level 2, Green Guard UL Gold

Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

2-SEATER SOFA Pearl (Leatherette/ Fabric)

Indulge: S-906 E (Leatherette/ Fabric)

Overall Dimensions of 2 seater soaf shall be, 1545L x 880D x 840H. The seat/back mounting frame assy. holds the two side frames

together. the mounting frames, 2nos should be used to connect the side frames. Sofa inner frame structure shall be made from the

combination of treated solid wood (Neem / Pine wood) and plywood, webbing belts should be used to have good strength, rigid & stable

construction to ensure higher durability. The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density

5 respectively. Leatherette/ fabric upholstery Seat and back are upholstered using leatherette/fabric of Aprooved make shall be No's 1 ₹ 54,435.00 ₹ 54,435.00

ergonomically designed to offer the best seating comfort, Seat height should be normally between 17 to 18 inches and depth of Sofas

inches. Sofa shall be elevated from ground by about 3 inches using metal powder coated legs, which shall create provision for easy

cleaning at the same time offers floating look. The Fabric used for upholstery shall have abrasion resistance of more than 50K rubs, colour

fastness to light better than 5, colour fastness to rubbing 4-5, high quality Fabric to offer the best feel & comfort.The OEM shall have ISO Interact: S-902 (Leatherette/ Fabric)

9001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark. 3 Seater: 1800 (W) x 710 (D) X 780 (H)

Pearl (Leather ette/ Fabric) Indulge: S-906 E (Leatherette/ Fabric)

Overall Dimensions of 3 seater soaf shall be, 1930L x 880D x 840H. The seat/back mounting frame assy. holds the two side frames

together. the mounting frames, 2nos should be used to connect the side frames. Sofa inner frame structure shall be made from the

combination of treated solid wood (Neem / Pine wood) and plywood, webbing belts should be used to have good strength, rigid & stable

construction to ensure higher durability. The polyurethane (PU) foam shall be used in Seat & back rest having 40 density and 32 density

6 respectively. Leatherette/ fabric upholstery Seat and back are upholstered using leatherette/fabric of Aprooved make shall be No'sConverse: S 900 (Leatherette/ Fabric) 8 ₹ 36,290.00 ₹ 2,90,320.00 Barister-933 (Full Leather)

ergonomically designed to offer the best seating comfort, Seat height should be normally between 17 to 18 inches and depth of 20-22 Interact: S-902 (Leatherette/ Fabric)

inches. Sofa shall be elevated from ground by about 3 inches using metal powder coated legs, which shall create provision 44for easy

cleaning at the same time offers floating look. The Fabric used for upholstery shall have abrasion resistance of more than 50K rubs, colour

fastness to light better than 5, colour fastness to rubbing 4-5, high quality Fabric to offer the best feel & comfort.The OEM shall have ISO

9001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

Center table in size of 600 Dia x 450 H (mm) Converse: S 900 (Leatherette/ Fabric)

Barister-933 (Full Leather)

Table top shall be 18mm thick Prelaminated particle board E1 norms and the Understructure shall be made up of 19x19mm square MS 3 Seater: 1900 (W) x 750 (D) X 820 (H)

pipe having thickness of 1.6 mm. Frame shall be welded by CO2 welding process for uniform conforming to IS 816. Understructure frame

7 shall be powder coated in black shade. The OEM shall have ISO 9001, BIFMA Level 2, Green Guard UL Gold Certification, AIOTA, No's 1 ₹ 18,170.00 ₹ 18,170.00

IGBC Gold rated factory certification and India Design Mark.

Digitally signed by VARUN

Supply and installation of Lounge Single Seater must feature premium fabric or leatherette upholstery on both the cushion seat and back,

having a gas lift for height adjustment, ensuring a luxurious and comfortable seating experience. The upholstery should be of high quality,

offering durability, easy maintenance, and a refined aesthetic. The base of the sofa should be constructed from high-grade aluminum,

providing a sturdy foundation while contributing to a sleek, modern design. The aluminum base must be finished with a protective coating

8 to enhance its resistance to corrosion and wear, ensuring long-lasting durability in high-traffic environments. This combination of materials No's 8 ₹ 19,900.00 ₹ 1,59,200.00

should meet rigorous quality standards, providing a stylish yet functional seating solutions. The OEM shall have ISO 9001, BIFMA Level

2, Green Guard UL Gold Certification, AIOTA, IGBC Gold rated factory certification and India Design Mark.

Size:620X600X840

Supply and installation of Lounge Single Seater must feature premium fabric or leatherette upholstery on both the cushion seat and back,

having a gas lift for height adjustment, ensuring a luxurious and comfortable seating experience. The upholstery should be of high quality,

offering durability, easy maintenance, and a refined aesthetic. The base of the sofa should be constructed from high-grade aluminum,