SPECIAL REPAIR TO COOK HOUSES OF DUTY COY, DEPOT COY AND CHQ (BLDG NO- 193, 194 AND 195) AT 11 GRRC UNDER GE (WEST) LUCKNOW

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GE (WEST ) Lucknow

Name of Work : SPECIAL REPAIR TO COOK HOUSES OF DUTY COY, DEPOT COY AND CHQ (BLDG NO- 193, 194 AND 195) AT 11 GRRC UNDER GE (WEST) LUCKNOW

Contract No: GE/W/LKO/T-71 OF 2026-27

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness below or above ground level complete all as specified and directed. 1 Cum Excess(+) Full Conversion INR

2 Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. 5.73 Cum Excess(+) Full Conversion INR

3 Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and directed. 620 Sqm Excess(+) Full Conversion INR

4 Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

5 Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exc 1.5 sqm each complete all as specified and directed. 50 Each Excess(+) Full Conversion INR

6 Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. 24 Each leaf Excess(+) Full Conversion INR

7 Taking up or down steel tubing & connection 15mm bore complete all as specified and directed. 60 RM Excess(+) Full Conversion INR

8 Taking up or down steel tubing & connection 20mm bore complete all as specified and directed. 50 RM Excess(+) Full Conversion INR

9 Taking up or down steel tubing & connection 25mm bore complete all as specified and directed. 5 RM Excess(+) Full Conversion INR

10 Refixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed. 2 RM Excess(+) Full Conversion INR

11 Refixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed. 2 RM Excess(+) Full Conversion INR

12 Refixing 25mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed. 1 RM Excess(+) Full Conversion INR

13 M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 58 RM Excess(+) Full Conversion INR

14 M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 48 RM Excess(+) Full Conversion INR

15 M & L for GI tubing medium grade 25mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 4 RM Excess(+) Full Conversion INR

16 M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. 15 Sqm Excess(+) Full Conversion INR

17 M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. 4 Cum Excess(+) Full Conversion INR

18 Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 600 Sqm Excess(+) Full Conversion INR

19 M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. 200 Sqm Excess(+) Full Conversion INR

20 M & L for rendering 15 mm thick in CM 1:4 with water proofing compound (@ 3% by weight of cement) on fair faces of brick work or concrete surface finishing the surface even and fair complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately. 450 Sqm Excess(+) Full Conversion INR

21 M & L for rendering 10 mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and directed. 20 Sqm Excess(+) Full Conversion INR

22 M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and directed. 450 Sqm Excess(+) Full Conversion INR

23 M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of 1mm thick wall care putty complete all as specified and directed. Note: Oil bound distemper shall be carried out through roller. 200 Sqm Excess(+) Full Conversion INR

24 M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. 20 Sqm Excess(+) Full Conversion INR

25 M & L for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and directed. 600 Sqm Excess(+) Full Conversion INR

26 M & L for complete removal of existing treatment on wall /roof projectios including facia, cornices etc by scrapping with mechanical sander (Having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust, loose paint etc by skilled labour and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and directed. 400 Sqm Excess(+) Full Conversion INR

27 M & L for complete removal of existing treatment on walls and applying two coats of Oil Bound Distemper over a coat of 1mm thick wall care putty complete all as specified and directed. Note: Oil bound distemper shall be carried out through roller. 500 Sqm Excess(+) Full Conversion INR

28 M & L for preparation of new wood or wood based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 210 Sqm Excess(+) Full Conversion INR

29 S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed. 18 Each Excess(+) Full Conversion INR

30 Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed. 120 Kg Excess(+) Full Conversion INR

31 M & L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm stone aggregate) as in sub base/levelling course complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

32 M & L for coloured non -skid ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. 100 Sqm Excess(+) Full Conversion INR

33 M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. 520 Sqm Excess(+) Full Conversion INR

34 M & L for Granite (Z black, Maroon, Ruby Red) 18-20mm thick (of any type work) (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 including moulding (rounding edges), incl dismantling of existing stone slabs etc complete all as specified and directed. 50 Sqm Excess(+) Full Conversion INR

35 S & F in repair CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with quarter turn handle and wall flange complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

36 S & F in repair CP bib taps 15mm fancy type Chromium Plated with quarter turn handle and wall flange complete all as specified and directed. 30 Each Excess(+) Full Conversion INR

37 S & F in repair PVC connection pipe 15mm bore 450mm long with PTMT nuts complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

38 Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. 31.1 Per 10 Sqm Excess(+) Full Conversion INR

39 M & L for machine cut Kota stone slab flooring 18 to 20 mm thick over 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry and pointed with grey cement & pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. 291 Sqm Excess(+) Full Conversion INR

40 M & L for machine cut Kota stone slab 18 to 20 mm thick in, skirting, dado pillar laid over 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with mixture of grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed. 20 Sqm Excess(+) Full Conversion INR

41 Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

42 S & F for rotational moulded five layered white coloured polyethylene water storage tank cylindrical vertical with closed top hoisted & fixed in position of capacity 1000 litres complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

43 S & F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

44 S & F in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 2 Each Excess(+) Full Conversion INR

45 S & F in repair Gun-metal, globe or gate valves 25mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 4 Each Excess(+) Full Conversion INR

46 Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed. 60 RM Excess(+) Full Conversion INR

47 S & F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls complete all as specified and directed. 60 RM Excess(+) Full Conversion INR

48 S & F PVC(SWR) 110mm dia bends any radius complete all as specified and directed. 10 Each Excess(+) Full Conversion INR

49 S & F in repair 100mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. 40 RM Excess(+) Full Conversion INR

50 M & L for run lead joints for 75-80mm spigot and socketed pipes and fittings complete all as specified and directed. 14 Each Excess(+) Full Conversion INR

51 S & F in repair 75mm bore CI sand cast soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed. 30 RM Excess(+) Full Conversion INR

52 S & F cast iron bends (any radius) diminishing pieces or tapers for 100mm dia complete all as specified and as directed. 14 Each Excess(+) Full Conversion INR

53 S & F 75mm bore CI Tee, single (equal or unequal), ordinary or inverted (Spigot or socketed type) or with parallel branches complete all as specified and as directed. 14 Each Excess(+) Full Conversion INR

54 M & L in repair for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate) complete all as specified and directed. 15 Each Excess(+) Full Conversion INR

55 M & L in repair for 100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2;4, type B-1 (using 20mm graded stone aggregate) complete all as specified and directed. 15 Each Excess(+) Full Conversion INR

56 S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete as per the direction of Engr-in-charge (Note for WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made). NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 84 RM Excess(+) Full Conversion INR

57 S & F Factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chawkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) Calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (Max toxicity index 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws havinf min frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) & 1100N (Edge), min compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with MS hold fasts / lugs/ stainless steel dash fasternersof required dia and length complete as per the direction of Engr-in-charge (Note for WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made). NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 124 RM Excess(+) Full Conversion INR

58 S&F 30 mm thick Factory made solid WPC (Wood polymer Composit)both side pre-laminated moulded gauged door shutter min density 650kg/Cum with wire mesh in any number of division with brown wood grain texture including SS wire mesh (G-304) 0.36 mm minimum dia of wire and average width of aperture 1.4 mm and XPM aluminium mesh for additional strength and safety shall be fixed with 15 x 15 square tube in side rails with screwing 8 x 28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. The density shall be as per manufacture instruction complete all as specified and directed. NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 50 Sqm Excess(+) Full Conversion INR

59 S & F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. NOTE : The work for fixing of WPC doors/windows shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to WPC Door/windows shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to WPC doors/windows after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 64 Sqm Excess(+) Full Conversion INR

60 M & L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in benching and coping complete all as specified and directed. 0.3 Cum Excess(+) Full Conversion INR

61 Demolition and breaking up 150mm dia drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. 55 RM Excess(+) Full Conversion INR

62 Excavation in trenches n. exc 1.5 wide and n. exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed. 8.67 Cum Excess(+) Full Conversion INR

63 M & L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. 0.2 Cum Excess(+) Full Conversion INR

64 Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm thickness in soft / loose soil complete all as specified and directed. 4 Cum Excess(+) Full Conversion INR

65 Removing excavated soils to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. 4.67 Cum Excess(+) Full Conversion INR

66 M & L for 150mm dia Salt-glazed stone ware drain pipes laid in trenches and jointed as specified complete all as specified and directed. 55 RM Excess(+) Full Conversion INR

67 M & L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) for 150mm dia pipe complete all as specified and directed. 50 RM Excess(+) Full Conversion INR

68 M & L in repair precast cement concrete 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 as in cover slabs for drain / manhole cover complete all as specified and directed. 0.33 Cum Excess(+) Full Conversion INR

69 M & L for 10mm dia and over TMT bar, cut to length bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. 50 Kg Excess(+) Full Conversion INR

70 M & L for cutting chases pining in making to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth to brick walls etc complete all as specified and directed. 60 RM Excess(+) Full Conversion INR

71 Providing & fixing of A2Z series, double rebate windows & ventilators made of high performance factory made system aluminium windows with Akzonobel powder coating of 60-70 microns (Any RAL Colour), Section of outer frame should be of 91mmx35mm, Glass shutter frame shall be of 54mmx30mm, mesh shutter frame shall be 54mmx30mm, 5mm thick single glazed beading shall be of 15mmx18mm, 5mm thick clear glass shall be used in all the windows & ventilators. Stainless steel wire mesh shall be used in wire mesh shutters. 10mm Sq bar MS Gril/ Guard bar with 150mm c/c shall be fiexed between glass & mesh shutter. All frame corners shall be joined/ assembled using self coating corner cleats (No screwing at corners shall be allowed). All hardware shall be used from a reputed brand, weather silicon shall be used for filling the gap between window opening & window frame complete all as specified and directed by Engr-in-Charge. NOTE : The work for fixing of system aluminium windows/ventilators shall include the following and the rates quoted by the bidder shall include the same:- (i) The work pertaining to system aluminium windows/ventilators shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials as pertains to system aluminium windows/ventilators after approval by the GE. (ii) The contractor shall upload with the documents under cover-I "Memorandum of Understanding" (MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. 77 Sqm Excess(+) Full Conversion INR

72 S & F anodised aluminium window and ventilator powder coated shutters top hung type without sash, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed. 14 Sqm Excess(+) Full Conversion INR

73 S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified and directed. 45 Each Excess(+) Full Conversion INR

74 S & F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed. 176 Each Excess(+) Full Conversion INR

75 S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed. 176 Each Excess(+) Full Conversion INR

76 S & F Stainless Steel butt hinges 100mm size and fixed complete all as specified and directed. 264 Each Excess(+) Full Conversion INR

77 S&F aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed. 58 Each Excess(+) Full Conversion INR

78 S&F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. 30 Each Excess(+) Full Conversion INR

79 M & L for 75 mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection, top finished even and smooth without using extra cement including making dummy joints 10x30mm size and filling the same with mix of 1 part of bitumen and 3 parts of sand at distance not exc 2.5 m and at every turning point incl demolition of existing cement concrete complete all as specified and directed. 50 Sqm Excess(+) Full Conversion INR

80 S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed. 11 Sqm Excess(+) Full Conversion INR

81 S & F in repair curtain rod made of stainless steel fancy type with brackets including all fittings etc complete all as specified and directed. 5 RM Excess(+) Full Conversion INR

82 M & L for obliterating number plaque and painting background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.10 sq m but not exc 0.40 sq m each complete all as specified and directed. 3 Each job Excess(+) Full Conversion INR

83 M & L for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. NOTE: (i) WPC shall measured and paid seperately. 2 Cum Excess(+) Full Conversion INR

84 Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions complete all as specified and as directed. 145 Sqm Excess(+) Full Conversion INR

85 Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed with following specifications :- (a) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 650 microns. the cured membrane shall exhibit : (i) Tensile Strength ASTM D412 : 1.4-2.5 MPa. (ii) Elongation ASTM D412 : 400-500%. (iii) Adhesion Strength : >2N/sqm as per ASTM D4541. (iv) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999. (v) Water Permeability : NIL as per DIN 1048. (vi) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky. 145 Sqm Excess(+) Full Conversion INR

86 SURFACE PREPARATION : Prepration of existing surfaces like chipping of unsound weak / loose concrete/cover of reinforcement and removal of debries to a designated location (upto full height) block to support the structure proisionally during repair work and maintaining them in positioin till required complete all specified and directed by the Engineer-in-charge. 17 Sqm Excess(+) Full Conversion INR

87 M&L for rusted exposed reinforcement apply & supply of Sika Rustoff 100 or equivalent rust remover with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours.After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation and errection of steel props. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorised applicator of manufacturer only. (Mode of area measurement will be chipped concrete in sqm) 17 Sqm Excess(+) Full Conversion INR

88 CORROSION RESISTANCE COATING : Providing and Application of Sika Friazinc R or equivalent as passivator/ Anti corrossion coating to the steel reinforcement shall be applied . The material shall be two component,cement based polymer modified two component coating for corrosion protection.The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted. This shall include surface preparation and errection of steel props as required for the application complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorised applicator of manufacturer only. (Mode of area measurement will be chipped concrete in sqm) 16 Sqm Excess(+) Full Conversion INR

89 EPOXY BONDING AGENT : Appplying & supply of two component solvent free epoxy bonding agent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or latiance. The material is supplied as a two part material in preweighed quantities for ready on site mixing and use. The material shall exhibits the following properties :- (i) Compressive strength 50 N/mm2 at 7D Flexural strenght 35N/mms at 7 D. (ii) Shear strength 10N/mm2 at 7D. (iii) Tensile strength 20 N/mm2 and Bond Strength of 10N/mm2. The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction complete all as specified and as directed by Engr-in-charge. Note: Work to be executed by the authorised applicator of manufacturer only. 16 Sqm Excess(+) Full Conversion INR

90 PATCH WORK FOR INSUFFICIENT CONCRETE COVER OR SOFFIT AREA OF CONCRETE : Providing and Applying ready to use single component fibre reinforced high strength polymer modified cementitious mortar in 25mm thick. Water /Powder ratio shall be as specified by manufacturer so as to achieve the following parameters:- . (i) 28 days Compressive Strength >=50N/mm2. (ii) Flexural strength at 28 days >= 5 N/mm2. Note: Work to be executed by the authorised applicator of manufacturer only. 16 Sqm Excess(+) Full Conversion INR

91 Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and making good disturbed surfaces even and smooth with using CM 1:3 including white/colour wash to match the existing surface complete all as specified and as directed. 285 Per point Excess(+) Full Conversion INR

92 M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor 1.5 sqmm colour coded drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :- (a) One light point /fan point controlled by one switch complete all as specified and as directed. 150 Per point Excess(+) Full Conversion INR

93 All as per Serial item No. 92 here in before but One 3 Pin, 6 Amp socket outlet point on an independent board with cable size 1.5 sqmm complete all as specified and as directed. 60 Per point Excess(+) Full Conversion INR

94 All as per Serial item No. 92 here in before but One 3 Pin, 6 Amp socket outlet point on same board with other switches with cable size 1.5 sqmm complete all as specified and as directed. 30 Per Point Excess(+) Full Conversion INR

95 All as per Serial item No. 92 here in before but One 3 pin, 16 Amp socket outlet point on an independent board with cable size 2.5 sqmm complete all as specified and as directed. 45 Per point Excess(+) Full Conversion INR

96 S&F Modular switch 1 way 10A, 1 module size of approved make ,with all necessary fixing and electrical connections complete all as specified and as directed. 240 Each Excess(+) Full Conversion INR

97 S&F Modular switch 1 way 16A, 1 modulesize of approved make ,with all necessary fixing and electrical connections complete all as specified and as directed. 45 Each Excess(+) Full Conversion INR

98 S&F modular Socket, 6A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete all as specified and as directed. 90 Each Excess(+) Full Conversion INR

99 S&F modular Socket 6A/16A - 2/3 pin combined 2 module of approved make ,with all necessary fixing and electrical connections complete all as specified and as directed. 45 Each Excess(+) Full Conversion INR

100 Supply & fix modular fan regulator 100 / 100 W, in 2 Module for ceiling fan and connecting complete all as specified and as directed. 12 Each Excess(+) Full Conversion INR

101 S&F angle type holder insulated of approved make with insulated polycorbonate body with modular frame including necessary fixing accessories and electrical connections complete all as specified and as directed. 18 Each Excess(+) Full Conversion INR

102 S&F ceiling rose, three terminals with insulated of approved make with all necessary fixing accessories and electrical connection complete all as specified and as directed. 126 Each Excess(+) Full Conversion INR

103 Supply only LED bulb 7/9 watt complete all as specified and directed . 18 Each Excess(+) Full Conversion INR

104 S& F in replacement of Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, with 01 No. 9 W LED Bulb, 230 V, 6000K complete incl all required electrical connecting arrangements complete all as specified and directed. Note: Rates incl 01X 9 W LED Bulb with each fitting 6 Each Excess(+) Full Conversion INR

105 Supply and Fixing in replacement of wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed . 90 Each Excess(+) Full Conversion INR

106 S&F in replacement of LED Building security light 25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

107 M&L in replacement for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed. Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate. 360 RM Excess(+) Full Conversion INR

108 M&L in replacement for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed. Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate 278 RM Excess(+) Full Conversion INR

109 S&F in replacement of sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. 9 Each Excess(+) Full Conversion INR

110 Supply and fixing in replacement of MCB SP 240 volts, C Curve of 32 Amps, 10 KA Current carraying capacity complete all as specified and directed . 90 Each Excess(+) Full Conversion INR

111 Supply and fixing in replacement of MCB SPN 240 volts, C Curve of 40 Amps, 10 KA Current carraying capacity complete all as specified and directed . 9 Each Excess(+) Full Conversion INR

112 Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. 12 Each Excess(+) Full Conversion INR

113 S&F of exhaust fan single phase, 230 Volt heavy duty of size 380 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

114 M&L for cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300/380 mm sweep incl plastering and making good the disturbed surface surrounding complete all as specified and directed. 6 Each Excess(+) Full Conversion INR

115 S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete and comprising of the following:- (i) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (ii) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. 3 Each Excess(+) Full Conversion INR

116 S&F in replacement of modular power unit with socket plug top and MCBs with single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 16/20 Amp complete all as specified and as directed. 12 Each Excess(+) Full Conversion INR

117 S&F wall mounted fan 400mm Sweep ,240v, 50hz complete all as specified and as directed. 12 Each Excess(+) Full Conversion INR

118 Taking down and disconnecting of ceiling fans / exhaust fan of any size from ceiling rose/connector for cleaning,servicing /oiling and greasing of fan by using appropriate grade of oil/grease and replacing defective parts such as bush bearing , split pin rubber bush, capacitor etc and rehanging the same after proper cleaning and making connection with ceiling fan/connector with flexible wire of size 23/0076 copper conductor multi stranded complete all as specified and as directed. 12 Each Excess(+) Full Conversion INR

119 M&L of earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print complete all as specified and as directed. 6 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures

Please Enable Macros to View BoQ information