Construction of 11kv Underground Feeder from 33/11kv sub-Station (Jewar Bangar) to Existing Khader Freeder on R and R Colony main Gate yeida (WC-E,M-03)

Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz.

AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job. (CCI , Fort Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI make. YEIDA (2d) 3CX300 Sqmm.

Supply, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable with cable termination at the panel & transformer complete in all respect as required for proper completion of work as per direction of Engineer-in-charge. (Make Raychem/ C.C.I./ Frontec) (I) 3CX300 Sq.mm. YEIDA SOR-5(I)

S/F of cross arm made of 75X40X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge YEIDA SOR-29

S/F of G.I Pipe 15OMM dia "B"class Jindal/tata make including required material T&P etc. Complete in all respect, as directed by Engineer in charge. as per the directions of the Engineer-in charge. YEIDA SOR-65

S/L of 160mm dia. H.D.P.E. pipe for drawing of power cable across the road by drilling of 180mm dia. at 1mtr. below the road level thereby doing the work of providing H.D.P.E pipe by manual Trenchless method. PE-63/PN-8 Ccomplete in all respect, as directed by Engineer in charge, YEIDA SOR-22

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . PS-623

Supply & fixing of Cable route marker including Painting & Writing Analysis of rates Complete in all respects as per direction of the Engineer-in-charge. Analysis of rates YEIDA SOR -55