PROVN OF PCC HARD STANDING IN FRONT OF LOX PLANT NEAR ICU TOILET BLOCK NEAR PAEDIATRIC WARD AND LPG GAS BANK IN PATIENT MESS AND AIRMEN MESS AT 7 AFH KANPUR CANTT

Amount

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in hard/dense soil complete all as specified and as directed .

M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for foundation mass concrete complete all as specified and as directed .

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed .

M&L Brick work with sub class ‘B’ bricks in cement mortar 1:4, straight or curved on plan to any radius in half brick thick walls complete all as specified and directed.

M&L for RCC Type A-1, 1:1.5:3 nominal mix (using 20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4 nominal mix type B1 (using 20 mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

As per item No. 8.00 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L Formwork flat rough finished to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4), finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:6), finished surfaces even and smooth without using extra cement complete all as specified and as directed .

M&L for preparing of new surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying 3 coats of white wash on walls complete all as specified and as directed .

M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed .

M&L for cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) 25 mm thick as in floor finish complete all as specified and as directed .

M&L 15 mm thick screed bed in CM 1:6 for laying of tiles complete all as specified and directed.

M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured digital ceramic tiles in vertical surface as in walls, dado, etc. 450x300x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection complete all as specified and as directed.

Supply and fixing powder coated aluminium grill to windows/ventilators including aluminium 'F' Channel 20 x 20 x 2 mm thick, fixed all round of grill with stainless steel screws complete all as specified and as directed : Make : Deco Cat Part No 104 or Equivalent approved by GE.

S&F powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fittings, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below complete all as specified and directed Frame : 44.5 x 44.5 mm x 1.80 mm thick Middle rail : 44.5 x 44.5 mm x 1.80 mm thick Glazing: 5 mm thick frosted glass fixed with rubber gasket and aluminium beading. Wire gauge: stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium beading.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid or/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 50 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete, all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150 mm long Aluminium anodised handles of fabricated type complete all as specified and as directed.

S & F Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed by Engr-in-Charge.

S & F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy & fixed and compete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F 3 mm thick plain sheet glass, ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each pane and complete all as specified and directed.

S & F mild steel framed work such as door frames, grills, gratings, etc, with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 including necessary welding, drilling hole complete all as specified and directed

M & L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth & complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 15 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised steel water tubing 20 mm dia bore medium grade with all fittings such as bends, tees, nipples, elbows, socket reducers, etc, fixed to walls and ceilings or laid in floors complete all as specified and directed.

M & L cutting chases for concealed water tubing or concealed conduit wiring, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges, etc., cutting not exc 10 cm width or girth complete all as specified & directed.

S&F Vitreous China Urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinals against wall in CM 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, CP waste coupling, waste pipe, automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete. complete all as specified and as directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, including 600 mm long CI P-trap, connection to trap and to flushing pipe, anti syphonage pipe etc, and making good to floor complete all as specified and as directed.

S & F 10 litres capacity PVC low level valve less symphonic action type flushing cistern white with inlet, float valve, float and handle including brackets with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F PVC connection 15 mm dia 450 to 600 mm long with brass fly nut at both ends complete

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including supply & fix 20 mm dia GI light grade wash out pipe 450 mm long with plug and 20 mm dia GI light grade over flow pipe 600 mm long with fitting complete all as specified and directed.

Supply & fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size complete all as specified all and directed.

S&F 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm dia swan neck pillar tap (for oval type WHB) brass chromium plated with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, and fixed complete all as specified and as directed.

S & F brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule complete all as specified and directed.

S & F 15 mm bore bib taps, chromium plated cast copper alloy long body, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Chromium Plated brass soap dish fixed to wall with chromium plated brass screwed and cup washer complete all as specified and directed.

S & F brass chromium plated towel rail, 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

M & L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore outlet complete all as specified and as directed.

S&F PVC (SWR) soil waste & vent pipe, 75 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) soil waste & vent pipe, 110 mm dia, single socketed in any length with rubber ring joints laid in trenches or fixed to walls complete all as specified and directed.

S & F 75 mm dia PVC (SWR) bends, T, reducer any radius with rubber ring joints,laid in trenches or fixed to wall / floor / in trenches complete all as specified and directed.

S & F 110 mm dia PVC (SWR) bends, T, reducer any radius with rubber ring joints, fixed to wall / floor / in trenches complete all as specified and directed

S & F 110 mm dia PVC (SWR) vent cowl complete all as specified and directed .

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W(Gde E-250) quality-A complete all as specified and directed

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ ridge/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n.exe 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

M&L for pre-polished coloured chequred tiles glossy finish of size not less than 300 x 300 x 20-22mm thick with anti skid properties laid over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for transparent/coloured acrylic sheet 9-10 mm thick, fixed as false ceiling board of size 595 mmx 595 mm complete all as specified and as directed.

m & L for 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

S&F vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .

S& F 4 mm thick 'E board (classic) in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zinc coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/grab bars etc with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc.in required size,shape on walls or on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

S&F pedestal for Wash basin, vitreous China requisite size complete all as specified and directed.

S & F toilet paper holder, chromium plated fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S & F 15 mm dia CP brass centre hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.

S&F Jet spray (L-Band) with 1 mtr expandable tube & hook complete all as specified and directed.

S&F for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device complete all as specified and directed.

M&L sand filling under floors/ above floor including watering and consolidation all as specified and directed.

M&L hard core of broken stone or boulders gauge n.exc 63mm.deposided,spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed.

M&L for forming of costruction joint 30mm deepx10mm wide filled with sealling compound grade 'A' complete all as spfd and directed.

M & L for use and waste form work to edges of concrete flats, treads, breaks in floors, window cills , concrete railing,opening in railing,opening in concrete wall, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping or similar work exc 10 cm but n exc 20 cm wide complete all as specified and directed

M&L for 150 mm dia (internal bore) Reinforced concrete pipes, class NP3, laid and jointed complete with collars all as specified and directed.

M&L for 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed and complete all as specified and as directed.

M&L for Concrete bed in 1:3:6 type C2 to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L TMT bars 06 to 08 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply, laying, jointing and testing GI pipe medium grade including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc laid in trenches as specified and as directed at site of the following size : - Note : - (i) The laying and jointing of pipes are required to be carried out inshort / long streches catering to specified requriements of a group of blocks.

40 mm dia

25 mm dia

M&L for construction of valve chamber 900 x 900 x 900 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 6mm thick with lifting hook and locking arrangment complete with necessary earth work brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces all as specified and directed.

S&F gun metal iron gate valve of 40 mm dia with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F gun metal iron gate valve of 25 mm dia with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

M&L for point wiring with PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size bakelite sheet 3mm thick for mounting switch, socket brass screws and washer including PVC insulted and unsheathed solid copper wire of size 1.5 Sqmm will be used as continuous earth wire for one light / fan point complete all as specified and directed

M&L for point wiring with PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including PVC insulted and unsheathed solid copper wire of size 1.5 Sqmm will be used as continuous earth wire for the following complete all as specified and directed :-

One light / fan point controlled by one, one way switch

One 5/6 Amp socket on the same board with other switch

One 5/6 Amp socket on independent board.

A ll as per item No 89.00 but for One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 2.5 Sqmm

S & F of ceiling rose surface backelite, 65 x 20 mm three terminal complete all as specified and directed.

S & F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for fixing SPN Isolator as incomer complete all as specified and directed.

S & F of Isolator SPN , 63 Amp , 240 Volt complete all as specified and directed.

S & F of MCB SP upto 32 Amp ,240 Volt complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6.0 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 cement concrete .RCC 1:2:4 Mix type B-1 reinforced with 6mm dia MS bars @ 150mm c/c RCC cover slab 40mm thick with two Nos fitting handle, GI pipe 20mm dia light grade with funnel & wire mesh for watering and 40mm dia light grade GI pipe for earth lead protection etc. complete all as specified and directed by Engr-in-Charge

M & L of bulk head fitting of any type with LED bulk fitting with 9 watt LED complete connection with copper wire 23/0076 three core from ceiling rose to bulk head fitting complete all as specified and directed.

S & F fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed.

S & F modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F of modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed

S & F of modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F of modular white cover plate with frame, 1 module, complete all as specified and directed.

S & F of modular white cover plate with frame, 3 module, complete all as specified and directed.

S & F of modular white cover plate with frame, 4 module, complete all as specified and directed.

S & F of modular metal flush box, 1 module, complete all as specified and directed.

S & F of modular metal flush box, 3 module, complete all as specified and directed.

S & F of modular metal flush box, 4 module, complete all as specified and directed.

M&L for spreading & leveling dry clean Ganga sand in trenches for cushioning UG cable complete all as specified and directed.

M&L for sub class old size of Brick in trenches for cable protection of LT Cables complete all as specified and directed.

S&F of 50 mm nominal bore light grade galvanised mild steel tubing with all fittings and fixed to poles / walls with mild steel clamps, bolts, nuts and washers complete all as specified and directed

S & F XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 16 sq mm 2 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole and wall all as specified and directed.

Supply and fixing Exhaust fan AC single phase 230/240V of size 300 mm in sweep , metallic body complete with all accessories including making connection by using three core flexible wire of size 0.50 sqmm and making holes, grouting nut bolts in wall for exhaust fan all as specified and as directed.

S & F switch piano type 240 V, 5 Amp , SP one way flush type complete all as specified and directed.

S & F light fitting with LED type surface mounted decorative bed light fitting 10 Watt LED complete with all accessories such as LED driver, LED bulb/rod and LED batten with cover etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as directed.

M.M.V. CONSTRUCTIONS (BID ID -3126263)

M/s DKS Engineering Works (BID ID -3118332)