RENEWAL REPLACEMENT OF UNSV ITEMS OF FURNITURE AT DRDO MARRIED ACCNS PHASE II AND OTMS UNDER GE I RD EAST BANGALORE

Amount

Provision of Chair Revolving Medium Back (TP) with ARM Knee tilt synchronic shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Pedestal Base shall be made of Glass Fibre Nylon with ABS/ NylonTwin Caster WheelsMinimum 5 Nos, of 50 mm Size and Proypylene Arm. Material of Seat /Backrest shall be PU Foam covered fabric and seat cover fabric shall be 100% polyester fabric with Mesh fabric and mountedon main assembly and Seat shall be push back type.Colour of Fabric for Seat and Backrest as approved by GE and locking position of chair shall be locked in 4-Position. Make : Featherlite or equivalent in Durian /Methodex / Godrej

Provision of Computer Table (TP) with keyboard drawer and table top of size 1000 Mm (L) X 600 (D)Mm X 750 Mm (H) shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Steel members shall be welded and rigid fixed table top,with slideable key board tray,drawer,modesty panel,foot rest and also with another shelf at the bottom side for placing CPU and other peripherals. Thickness/material/colour of table top, Key board and drawer shall be 18mm pre-laminated Particle boards of grade II Type II of IS 12823 Latest and bottom side of top should have balancing sheet of requisite thickness of same colour as top laminate teak colour and Zinc-chromate primer coating shall be done/provided on M S parts of computer table. Make : Durian or equivalent in Featherlite/Methodex / Godrej

Provision of Chair Visitor Steel (TP) of size (D) 450 mm x (W) 470 mm x (H) 460 Padded with Polyurethane Foam shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. material of fabric back cover shall be made of polyster and frame materail of MS ERW tube type of 2 mm thick 25 mm tube. 12mm thickness seat plywood shall be done/provided ±1(mm) and polypropelene Arms material. Thickness of Polyurethane foam shall be used in seat/backrest in 50 MM ±3 (mm).Type of Seat and Backrest shall be made of Padded with Polyurethane Foam and Cantilever type frame. Shoe of chair visitor shall be provided/done of nylon rubber material. Make :Featherlite or equivalent in Durian /Methodex / Godrej

Provision of Chair Revolving High Back (TP) With ARM push back type shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Pedestal Base shall be made of Glass Fibre Nylon with ABS/ NylonTwin Caster WheelsMinimum 5 Nos, of 50 mm Size and polyurethane adjustable Arm. Material of seat shall be pressed and made of moulded plywood with polypropylene cover. Material of Fabric Back Cover /seat cover shall be provided/done as mesh fabric and 100% polyester fabric.Type of chair shall be Push back type and adjustment of height shall be supported up 100mm ± 5(mm). support of backrest shall be provided with Adjustable Lumber Support. Overall Chair Height of chair HB shall be 1080 ±15mm, in which Backrest (H) 550mm ±15mmx (W) 480mm ±10mm and Seat (H) 480mm x (W) 480mm x (D) 460mm (±10 mm). 2mm thickness of MS plate shall be jointed under the structure with seat and 12mm plywood shall be done /provided for seat (±1(mm). Make : Durian or equivalent in Featherlite/Methodex / Godrej

Provision of Table Officer Steel (TP) of size 1600mm (L) x 900 (W) x 725 (H) with one side tripel storage shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Table top sahall be made of 18 mm thick prelaminated Particle Board of size (L) 1660mm x(W) 900mm x (H)725mm and storage/drawer unit sahll be made of 0.6 mm MS sheet CRCA as per IS 513 latest.Padestal unit(Under structure) shall be made of 1.2mm thick Mild Steel ERU Tube of size 38mm x 25mm, where size of storage unit/ lockerof (H) 550mmx (W) 355 mm x (D) 560mm.Edges of table top shall be covered of 2.0mm thickness of PVC Tape banded with the help of hot melt glue. Material of Handle shall be done of Injection moulded polypropylene and PVC type shoes shall be provided/done. Colour of paint/Lamination powder coated and approval of the same as approved by GE. Lock for storage unit /locker shall be provided on all storage sapretaly. Make : Godrej or equivalent in Featherlite/Methodex /Durian

Provision of Table Office Clerk Steel (TP) of size 1500mm (L) x 750 (W) x 725 (H) with one side tripel storage shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Table top shall be made of 18 mm thick prelaminated Particle Board of size (L) 1500mm x(W) 750mm x (H)725mm and storage/drawer unit sahll be made of 0.6 mm MS sheet CRCA as per IS 513 latest.Padestal unit(Under structure) shall be made of 1.2mm thick Mild Steel ERU Tube of size 38mm x 25mm, where size of storage unit/ lockerof (H) 550mmx (W) 355 mm x (D) 560mm.Edges of table top shall be covered of 2.0mm thickness of PVC Tape banded with the help of hot melt glue. Material of Handle shall be done of Injection moulded polypropylene and PVC type shoes shall be provided/done. Colour of paint/Lamination powder coated and approval of the same as approved by GE. Lock for storage unit /locker shall be provided with keys in duplicate for each locker/storage sapretaly. Make : Godrej or equivalent in Featherlite/Methodex /Durian

Provision of Almirah Medium Steel 3 Shelves(TP) of Size 1155mm (H) x 760mm(W) x 430mm (D) shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Almirah Medium steel shall be manufactured of M S Sheet conforming to Quality Grade D of IS:513/2008 with amend. no. 1 ,whether thickness of door sheet minimum 0.9mm and thickness of sides,back , Top and Bottom not be less then 0.8mm, Shelves/Pedestal of 0.6 & 0.9mm. lock shall be Three Way bolting device controlled by 6 lever lock having made of steel with zinc plated finish and brass levers zinc plated finish along with MAZAK / ZAMAK handle. Almirah having 2 doors, Three adjustable shelves with door stiffner upto full height shall be provided with Almirah Door.Bending, welding, riveting, bolting, lapping, turning and other items/ fitting shall be done/provided as specified in relevant IS and as per trade. All internal/external exposed steel surfaces shall be given powder coated (Olive green/Steel grey as approved by GE) paint over a coat of red oxide primer (Spray painting)engineering norms and pattern. Make : Godrej or equivalent in Featherlite/Methodex /Durian

Provision of Book shelf /Book case steel (TP) having 4 doors and 3 way bolting of size 1675 (H) x 840 (W) x 320 (D) shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Thickness of MS Sheet used for Top, Bottom, Back and Sides shall be made of 0.8mm and for Shutter and Shelf shall be 0.7mm. Shutter door glass provided/done with minimum thickness of 1.5mm transparent glass and Book shelf lock shall be provided/done of three way bolting device type controlled by 6 lever lock. Mechanism of book shelf shall be Scissor mechanism type for receding inside the top of respective component. Colour of paint shall be powder coated and approval of the same as approved by GE. Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Almirah Large Steel 4 shelves (TP) of Size (H) 1855mm x 910mm (W) x 486mm (D) shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Almirah Medium steel shall be manufactured of M S Sheet conforming to commercial quality CR- 1,Grade340 of IS 513:2008 (reaffi rmed 2013)(Fifth Revision)Amdt. no.1 ,whether thickness of door sheet minimum 0.8mm and thickness of sides,back , Top and Bottom not be less then 0.8mm, Shelves/Pedestal of 0.7mm & 1.0mm. lock shall be Three Way bolting device controlled by 6 lever lock having made of steel with zinc plated finish and brass levers zinc plated finish along with MAZAK / ZAMAK handle. Almirah having 2 doors,Three hinges with each door and Four adjustable shelves with 125 mm door stiffner(+/- 5 mm) of 0.6mm Thickness of MS Sheet of Stiffner upto full height shall be provided with Almirah Door. Bending, welding, riveting, bolting, lapping, turning and other items/ fitting shall be done/provided as specified in relevant IS and as per trade. All internal/external exposed steel surfaces shall be given powder coated (Olive green/Steel grey as approved by GE) paint over a coat of red oxide primer (Spray painting)engineering norms and pattern. Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Table Officer Wooden/ Executive Table(TP) of size (L)1500mm x (D) 850mm x (H) 750 mm with one side storage of size (W) 600mm x (D) 750mm and key board tray shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS and to be Assembled At Consignee Site By The Seller. Table top thickness of 19mm and Gable end thickness of 12mm shall be made/provided of material Commercial Block Board MR Grade Conforming to IS 1659 and Table top long sides and plain side edge to be banded with PVC tape of 2mm thick with the help of hot melt glue having Teak laminate/ply with melamine finish. Understructure of table shall be done/provided of Gable end and modesty panel type and keyboard tray shall be made/provided of Wooden keyboard tray having 19mm thckness.Fxing of supporting bracket/channel shall be made/provided With telescopic type havingLength of telescopic channe(±l0mm) 400mm. Colour of paint/Lamination powder coated and approval of the same as approved by GE. Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of 3 Seater Sofa (TP) With Leatherite Cover and Fully Upholstered frame shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS of Size (L)1900 x (D)850. Timber : All wood work shall be Ist class hard teak wood throughout. Sofa and Backrest Seat and Backrest shall be permanently fixed with the frame Structure Covering Material for Seat and Backrest as Leatherite material. Foam: Cushioned seat and back shall be 100mm thick PU foam of shape and dimensions density 40mm of make as approved by GE. sofa set having Arm Width ±5 (mm) 120mm and (H) ±5 (mm) 680mm and Sofa Leg Height ±2(mm) 150mm x (W) ±2 (mm) 75mm .Finishes: All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished. All other items / fittings shall be as shown GeM producr ID and provided as per relevant IS and trade engineering norms / pattern. (Note :- The foam cushion in original packing with warranty card and tapestry cover shall be brought separately in furniture yard and after inspection the same shall be fixed, stitched and packed at furniture yard.) Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Steel Filing Cabinets with 4 Drawers (TP) of size (H) 1300mm x (W) 475 mm x (D) 600mm shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Steel filing cabinet shall be manufactured of M S Sheet conforming to thickness of Side,Back, Top and bottom of 0.7 millimeter and drawer 0.6mm of thickness and with central locking machanism and Ball Slide suspension of drawer. welding, riveting, bolting, lapping, turning and other items/ fitting shall be done/provided as specified in relevant IS and as per trade. All internal/external exposed steel surfaces shall be given powder coated (as approved by GE) paint as per engineering norms and pattern. Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Storage rack steel/Rack Steel Adjustable(TP) of size (H) ±3mm 1755 mm x (W) ±3mm 915mm x (D) ±2mm 410 mm shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Steel rack shall be manufactured of M S Sheet conforming to Material of back/sides/dividers/shelves Mild steel sheet 1mm thick Grade O-1079 conforming to IS:1079:1994 and Kick plate shall be made of MS Sheet 1.25mm thick Grade O-1079 conforming to IS:1079:1994 and screw metric hexagon head coarse pitch black steel 4.6 M6 X 14mm long(5305-002 410) conforming to IS:1363(Part3):2002. Distance between, bottom shelves and floor shall be ±2mm 130 mm, bottom shelves and firstshelves ±2mm 480mm, first shelves and second shelves ±2mm 460 mm,Second shelves and third shelves ±2mm 380 mm third shelves and top shelves±2mm 305 mm,Divider 2 nos in each parallel to the sides at a distance of 305 mm. Colour of rack shall be Paint RFU priming G.S brushing/spraying red oxide of Iron zinc chromate ISC 446 conforming to IS 2074:1992(as approved by GE) and finishing war equipment air-drying brushing/spraying with O.G.scamic No.314 conforming to IS:8982:1991.Holes/slots In the sides/shelves dividers/back and kick plate shall be accurately drilled/punched of 22 numbers of 7mm size holes on both side to suit the shelves. Make : Godrej or equivalent in Featherlite/Methodex.

Provision of 1 Seater Sofa (TP) With Leatherite Cover and Fully Upholstered frame shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS of Size (L)800 x (D)900. Timber : All wood work shall be Ist class hard teak wood throughout. Sofa and Backrest Seat and Backrest shall be permanently fixed with the frame Structure Covering Material for Seat and Backrest as Leatherite material. Foam: Cushioned seat and back shall be made of foam of shape and dimensions density of cushion of seat material (Kg/cubic M) 26, make as approved by GE. sofa set having Arm Width ±5 (mm) 150mm and (H) ±5 (mm) 460mm and Sofa Leg Height ±2(mm) 50mm x (W) ±2 (mm) 25mm .Finishes: All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished. All other items / fittings shall be as shown GeM producr ID and provided as per relevant IS and trade engineering norms / pattern. (Note :- The foam cushion in original packing with warranty card and tapestry cover shall be brought separately in furniture yard and after inspection the same shall be fixed, stitched and packed at furniture yard.) Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Chair Revolving Computer (TP) with Synchronic tilt mechanism shall be made to the shape, size and design as shown in GeM product ID and shall be manufactured in accordance with relevant IS. Chair Revolving Computer having Upright locking system and Chrome plated MS Pedestal Base. Armrest Material Shall be made of Polypropylene and seat should be made of Pressed and moulded with PU foam having 35 KG per Cu mtr density. Back rest upholstered with 100% Polyester Fabric and Size of pedestal should be having 620mm and Colour of Fabric for Seat and Backrest as approved by GE. Make : Durian or equivalent in Featherlite/Methodex /Godrej

Provision of Charpoy IP with Hardtop FD-MAP-II/01 Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level. 12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt. one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. MS plate 32x32x5 should be welded at bottom of legs and under which 3mm thick rubber sheet fixed with adhesive for each leg. All steel surfaces shall be black powder coated over a coat of primer. Rest all as per drg.

Provision of Bed Hard 6'x3' Steel FD/E6/MAP/08(R) Overall size shall be 2050mm long, 900mm wide and 400mm height. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg. 18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board. 25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg. One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. Underneath of Legs shall be welded with MS plate and also provided with rubber shoes to legs of bed. All metal/iron work shall be treated with synthetic enamel black after doing two coats of metal primer. Rest all as per drg.

Provision of Table Dining 4 Persons FD/MAP-II/03 Table dining shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Table Dining of size 1200X900 mm shall be provided with only one stiffener in the center of the Table. Timber : All wood work shall be seasoned Teak wood throughout except the top which shall be made of 18mm thick Pre-laminated MDF Board of Grade-I Exterior quality as per IS:14587 with PVC/6mm thick TW lipping alround. Finishes : All wood work and veneered surfaces exposed to view shall be French polished as specified except where painting is indicated on drawings. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

Provision of Chair Dining Wooden FD-MAP-II/04 Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply. 75mm thick 40 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm. Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs. The curved teak wood back shall be of section 30x45mm. All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be polished with high gloss finish of approved shade. Rest all as per drg.

Provision of Chair Easy Wooden FD-229 Chair easy shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout. Canning: Canning shall be done with 2 mm wide and 0.4mm thick plastic cane half round superior quality closely woven in Godrej pattern. Width of cane for border and strengthening band shall be 3.5mm. Rubber Toes : Rubber Toe shall be hard and of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. Finishes: All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

Provision of Chair Verandah (FD)-359 Chair verandha shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. The legs on both side of chair shall be of 20mm dia mild steel conduit of well thickness as 1.6mm made to shape as shown on drawing. the width at bottom of legs in sides shall be 600mm and at seat portion the witdth shall be 405mm. The frame of legs shall be in one peace. the width of seat between the legs shall be 460mm. canning shall be done with 4mm wide cane in mat pattern or or as directed by GE in the seat.PVC/hard rubber shoes/toes shall be provided to the bottom of all legs. All steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer after preparation of surface as directed by Enge in Charge/GE. Painting shall be done with spray machine . Caining shall be done after the painting of chair.

Provision of Teapoy Verandah FD-255 Teapoy verandha shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS of size (L) 900mm x (W) 450mm x (H) 400mm.Legs shall be of 20mm dia mild steel conduit of wall thickness 1.6mm made in U shape with bottom of legs in sides shall be 350mm apart U shaped legs shall be provided at 50mm from each end of long side. 25mmx3mm flat iron frame shall be welded on the top of conduit as shown on drawing. 20mm dia wall thickness as 1.6mm bottom stiffeners to short sides connected to legs in shorter sides shall be welded at 100mm high from bottom of legs. A long stiffener with 20mm dia wall thickness 1.6mm shall be welded with short stiffeners joining short stiffeners in the middle at 100mm high from bottom.Top of the table shall be made of 19mm thick particle board commercial over which 1.5mm thick plastic laminated sheet of white colour shall be fixed as directed by Engr in charge/GE.All steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer after preparation of surface as directed by Enge in Charge/GE.Hard rubber/PVC toes shall be provided to the bottom of all legs.

Provision of Peg Table Wooden FD-384 Peg table shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Timber: All wood work shall be kiln seasoned Ist class hard wood (Teak) throughout except top, Top shall be made out of particle board 19mm thick bonded with phenol formaldehyde as per IS-3087-1985 with 1.5mm thick decorative laminate and shall be ISI marking on the edges. Exposed edge of board shall be covered with 4mm thick teak wood edging fixed as directed by Engineer-in-Charge. Finishes: All timber / plywood / particle board surfaces exposed to view shall be French polished except inner side of top which shall be painted with one coat of synthetic enamel paint (Shade as approved by GE) Ist quality over a coat of pink primer. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

Provision of Sofa 5 Seater FD-373 Sofa set shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout. Foam: Cushioned seat and back shall be 100mm thick PU foam of shape and dimensions as shown on drgs. Foam shall be of 40 density of make as approved by GE. Tapestry cloth: Tapestry cloth for covering the foam shall be as approved by the GE. The cost of tapestry shall not be less than Rs. 400/- per meter (1.25 Mtrs width) and shall be stitched / fixed around as shown on drgs or directed by Engineer-in-Charge. Finishes: All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be French polished. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern. (Note :- The foam cushion in original packing with warranty card and tapestry cover shall be brought separately in furniture yard and after inspection the same shall be fixed, stitched and packed at furniture yard.)

Provision of Table Centre Wooden FD-274 Table centre shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout except the top, Top shall be made out of 19mm thick melamine faced pre-laminated particle board 18/19mm thick bonded with phenol formaldehyde as per as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 4mm thick teak wood beading all-round as directed by GE. Rubber Ring : Rubber ring shall be hard and of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. Finishes: All wooden surfaces exposed to view shall be French polished of glossy finish. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

Provision of Table 900x600 steel FD- 1007 shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS of size 900m x 600mm x760mm and Steel frame shall be of 800m x 500mm x 742mm. Four legs shall be made of 25mm square mild steel tube of wall thickness 1.6mm, top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm top rails on long and short sides. Two short stiffeners joining legs in short sides at 100mm from bottom shall be provided in the middle of short stiffenrs joining short stiffeners with 25mm square mild steel tube of wall thickness.Top of the table shall be made of 18mm thick pre laminated partical board with teak veneer shade.PVXC hard rubber shoe/toes shall be provided to the bottom of legs. All steel surface exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer with spray machine after prepration of steel surface.

Provision of Chair Writing Wooden FD-250 Chair writing shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS of size of (L) 535mm x (W) 470mm x (H) 890mm.The front legs shall be 45mm x45mm in section at 460mm from bottom and 25mm x 25mm in section at bottom at underside of hard restes which shall be at 660mm from bottom.Two rear legs shall be out of 65mm x45mm in section wood with 45mm x45mm in section at 460mm from bottom and 25mm x25mm in section at bottom of legs. A middle or cross stiffeners of Size 25mmx20mm in section shall be provided at 100mm from bottom of legs joining the side stiffeners in the middle. Caning shall be done in godrej patteren of thickness 2mm wide and 0.4mm thick weighing not less that 6gms per 10 running metre.The waving shall be done in such way that no joint shall be visible in the seat. All wooden surface exposed to view when placed in position shall be french polished with high gloss finish.

Provision of Rack Steel Open FD-106M of size (H) 1905mm x (W) 915mm x (D) 610mm shall be made to the shape, size and design as shown in drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Rack shall be manufactured of M S Sheet of back/sides/dividers/shelves Mild steel sheet 1mm thick with spot welding.Distance between, bottom shelves and floor shall be ±2mm 130 mm, bottom shelves and firstshelves ±2mm 480mm, first shelves and second shelves ±2mm 460 mm,Second shelves and third shelves ±2mm 380 mm third shelves and top shelves±2mm 305 mm.Four angles of 30mm x 30mm x 3mm of size sahll be provided at four corners as verticals.all steel and iron surface shall be painted with two coats of enamel paint over a coat of primer after preparation of surfaces as directed by GE. finishing shall be done with spary machine and Holes/slots In the sides/shelves dividers/back and kick plate shall be accurately drilled/punched of 22 numbers of 7mm size holes on both side to suit the shelves.

Provision of Table 900x600 FD-55 Wooden Table shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout except the top, Top shall be made out of 19mm thick block board teak veneer one faced and other face commerical shall be fixed on top of the table.Leg shall be made of size 60mmx60mm in section at top and 30x30mm in section at bottom. 25x65mm rails section rails and 25x40mm in section stiffeners shall be provided in table. Finishes: All wooden surfaces exposed to view shall be French polished of glossy finish. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

provision of Display Table wooden FD-139M Table shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. Overall size of table shall be (L) 1520mm x (W) 860mm x (H) 760mm.Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout except the top, Top shall be made out of 19mm thick block board tcommerical with 1mm thick plastic laminated sheet shall be fixed/provided on top of the table and 4mm thick teak wood edging shall be provided al-around the top of the table, Legs of table shall be made of teak wood of size 50mmx50mm in section at top and 40 x 40mm in section at bottom.25mm thick and 100mm high top rails joining legs shall be provided in long and short sides. 25mm x 50mm in section teak wood stiffeners shall be provided in the middle of long top rails/joining sides of top rails.All wooden surfaces exposed to view shall be French polished of glossy finish.

Provision of Table Bedside FD-276 shall be made to the shape, size and design as shown on drg and shall be manufactured in accordance with relevant IS of size (L) 450mm x (W) 230mm x (H) 510mm.Side of table bed side shall be of made of 18mm thick particle board having teak veneer face on top. 6mm thick commercial plywood shall be fixed at the back of table bed side. 12mm shelf shall be provided at 100mm high from bottom. 12mm sheleves shall be of particle board with teak veneer surface on top and commercial on other side. The plywood shall be fixed with headless nails. 4mm thick teak wood edging shall be provided in the front of side, top and shelves. Finishes: All wooden surfaces exposed to view shall be French polished of glossy finish. All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

agarwal and company