Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹45.5 L+₹4.1 L (9.93%)Rejected-Finance 84 B LOWER BURDWAN COMPOUND RANCHI 834001 JHARKHAND | RANCHI | JHARKHAND | 834001 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹45.8 L+₹4.4 L (10.7%)Rejected-Finance SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L3 | Rejected-Finance Higher rate quoted |
Tender Value
₹49.4 L
EMD Value
₹98,700
Closing Date
5 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_536682_1
8400-830/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D, Cat a (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹98,700
Yes
23 Sept 2022
8 Jul 2022
6 Aug 2022
8 Jul 2022
5 Aug 2022
22 Jul 2022
Amount
Dismantling, floor, hearth or wall tiling /terrazo including cement mortar bedding but not backing and removing rubbish off from the premises complete all as specified and directed.
Demolition of concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing rubbish off from the site complete all as specified and directed.
Demoltion of reinforced cement concrete of any description and in any position not otherwise specifically provided for including facilitate for cutting of reinforcement removing rubbish off from the site complete all as specified and directed
Demoltion of Brickwork or stone/boulder masonry, built in lcement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles removing rubbish off from the site complete all as specified and directed
Taking down chowkhats or frames n. exc. 1.5 Sqm with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed.
Taking down chowkhats or frames exc. 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frames) and removing to store complete all as specified and directed
Taking down cement plaster on brick orstone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc removing rubbish off from the site complete all as specified and directed
Taking up or down steel tubing 15mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed
Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
M&L for 25mm thick roof padding PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all specified and directed
Glazed ceramic tiles in vertical surface 350x 250x 7 mm/450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:3) screed bed or bedding layer complete all as specified and directed
S&F coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed
M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:6) complete all as specified and directed
Excavation in trenches in any type of soil n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for rendering 15 mm thick in Cement Mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement, using with Integral Water proofing compound in the mortar complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
M&L for rendering 15 mm thick in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed
M&L for sand filling under floor in foundation including watering and consolidation complete all as specified and directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepartion of new plastered surfaces complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for complete removal of existing treatment by means of mechanical and hand where the mechane can not reach and preparing the rough wall surfaces with exterior wall care putty and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gM&Litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation complete all as specified and directed
M&L for complete removal of existing treatment and applying two coats of white wash as in ceilings on old plastered surfaces including preperation complete all as specified and directed
M&L for three coats of white wash on walls on newly plastered surfaces including preperation complete all as specified and directed
M&L for complete removal of existing treatment and applying two coats of white wash as on walls on old decorated plastered surfaces including preperation complete all as specified and directed
Grooves for joints, tongues of cills, etc., throat (or small weather groove) as for cills, drip courses, etc. and rebates as for joints for granite or trap stone complete all as specified and directed
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto over and including 10mm thick in cement mortar CM (1:3) complete all as specified and directed
S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed
S&F 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter with half panel and mesh made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers complete as specified by the manufacturer and as per directions of Engineer?in-charge.
S&F butt hinges stainless steel 100mm long, medium weight, cooled rolled complete all as specified and directed.
S&F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F 150mm long extruded Aluminium alloy handles, fabricated type anodised complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm long complete all as specified and directed
M&L for preparation of new surfaces and applying two coat of synthetic enamel paint to over a coat of pink primer on wooden surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.
S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pan complete all as specified and directed
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
M&L for 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge.
S&F 35 mm thick factory made plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed by Engineer-in-Charge.
Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F steel rolling shutters, with out ball bearing, as specified including top cover, an?choring rod, hasp and staple and one shop coat of primer; erected in position as indi?cated, complete: push pull or manual type complete all as specified and directed
S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed
S&F ball bearing 450mm long for rolling shutters complete all as specified and directed
Taking down the existing rolling shutter including hood cover, servicing all the parts ie ball bearings, helical door spring, straightening of laths, hood cover and grasing for smooth functioning of rolling shutter complete all as specified and directed
S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.
M&L for 75 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed
Hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
Preparation of new painted surfaces of steel and applying two coat synthetic enamel paint to steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement complete all as specified and directed
M&L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth with using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:4) finished even and fair using with water proofing compound complete all as specified and directed. (Note: WPC shall be measured and paid seperately)
Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed (Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation new surface of roof and applying two coat of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @one litre per ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage /seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. (Notes- 1. As per description of the items minimum two coats of polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by the as per manufacture instruction.pl note no price adjustment shall be made,if more coats of (PU)acrlic based water proofing liquid compound & primer are required for roof treatment. 2. Quoted rate shall be deemed to be included for work in building/structure of any height).
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in surface channel or drains complete all as specified and directed.
S&F 20mm dia Tubes medium grade galvanised with all fittings and fixed complete to walls, floor etc complete all as specified and directed.
S&F in repairs vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed
S&F in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs 15 dia fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe complete all as specified and directed
S&F grating doom 125mm dia with waste hole of PTMT(mInimun weight 40gm) complete all as specified and directed
S&F 40mm bore PVC pipes (LDPE) of pressure rating 6kg/sqcm and fixed complete to walls, ceilings or in floors complete all as specified and directed
Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed
S&F in repairs vitreous china wash basin, white, flat back size 550X400, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets complete all as specified and directed
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed
M&L for 100 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base complete all as specified and directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in Kerb, coping and haunching including necessary form work complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed
M&L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed
M&L for brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM (1:4) complete all as specified and directed
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping , benching. Hauncing etc finished even and smooth complete all as specified and directed
M&L for pre-cast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in CM (1:6) complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed
S&F UPVC Eco Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and directed (Note: PCC haunching will be measured and paid seperately)
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed
M&L for 25 users Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, fly ash brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., all as shown in CE's TD drawing complete all as specified and directed
M&L for soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick all as shown in CE's TD drawing complete all as specified and directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed
Dismantling fencing wire mesh, any type complete all as specified and directed
Excavating in post holes (or similar holes) each n.exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exceeding 25 cm in soft/loose soil complete all as specified and directed
Supply only MS Galvanaised chain link fencing of size 75X75mm dia of wire 3mm complete all as specified and directed
S&F mild steel angle iron as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed
S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and directed
M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and directed
M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed
M&L for RCC 1:2:4 type B1 (nominal mix) (using 20mm graded stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and directed
All as per item No 95.00 mentioned here-in-above but in beam and lintels complete all as specified and directed.
All as per item No 95.00 mentioned here-in-above but in chajja complete all as specified and directed.
All as per item No 95.00 mentioned here-in-above but in slabs supported on walls, in roofs and in shelves and the like complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte complete all as specified and directed
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete complete all as specified and directed
All as per item No 100.00 mentioned here-in-above but for chajjas complete all as specified and directed.
All as per item No 100.00 mentioned here-in-above but for sides and sofits of beams and lintels complete all as specified and directed.
All as per item No 100.00 mentioned here-in-above but for sofits of slab complete all as specified and directed.
All as per item No 100.00 mentioned here-in-above but for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed.
M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed
M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and smooth with integral water proofing compound on wall complete all as specified and directed (Note: WPC shall be measured and paid seperately)
M&l for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Providing precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, rackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM (1:4) complete all as specified and directed
M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius, in half brick walls built in cement mortar (1:4) complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F Factory made steel ventilator with centre hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as specified.
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but n.exceeding 0.11 sqm in floors laid over and including 15mm thick (1:6) cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as specified and directed.
M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed.
S&F vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed.
S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, fixed type including one shop coat of red oxide zinc chrome primer complete all as specified.
S&F CP Bib taps 15mm dia, with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed.
S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as specified and directed.
S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.
S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed
S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.
S&F capacity 500 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engineer in Charge
S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.
M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.
S&F 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/ Tee/Reducer Nipple etc complete all as per specified and directed.
E/M PORTION M&L point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 134.00 mentioned here-in-above above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 134.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed
S&F 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
S & F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size complete all as specified and directed
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed by the Engr-in-Charge. (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note :Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
UNITED BUILDERS
Hooghly Construction Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .