Construction of Brick Chamber and attending Electrical, water supply arrangments and Motor repairing work to the Kakkayan MCC Centre Unit - 1,2,3 in Div. No 12 Hasthampatty Zone-2,Salem City Municipal Corporation

Amount

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Flooring with Cuddapah slabs of 40mm thick over a base mortar in CM 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20 mm thick and pointed with cement mortar 1:3 ( one cement and three Plastering sand) usimg Black oxide complying with standard specification.

Electrical items for MCC Center:-

40 mm dia 10kg per cm2 PVC Pipe suitable for 4×35 sq. mm PVC LTUG armoured cable Etc., Completed.

Other Items:-

40 mm PVC Bend (M- 0896)

4 Pole Sheet steel enclosures for MCB's( M-1800 Twad-24-25)

Supply of Miniature circuit breakers 240V / 415V 50Hz-AC supply suitable for both Lighting and Motor load-Higher End -Four pole 63A, 10 KA

6 A-230V Switch 1W -1 Module. ( M-1415)

6 A-230V Socket- 2 Module.

16A -230V Switch 1W-1 Module. ( M -1420)

16 A-230V Socket- 2 Module.

18 M Combined cover plates (M-1495)

Flush Mounting Box GI - 18 Module Metal Box

48W LED Street light fitting with LED (M -1291)

20W 4 Feet LED Fitting with LED

Earthing arrangements with GI Earth plate including charcoal and salt with necessary excavation in all soils and to full depth as per may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

18 M Combined cover plates

4 M Combined cover plates

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigidpipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colourfor open PVC light point / fan point (for electronic regulator) (4 points per coil)

Water Supply items

32 mm 10 kg per cm2 PVC Pipe ( M-0876)

32 mm Elbow

32mm Brass Valve

32 mm GI Pipe

32mm GI Elbow

75 mm 6kg per cm2 PVC pipe (M-0869)

75 mm PVC Elbow (M-0939)

75 mm PVC T Joint (M-0947)

75 mm PVC End cap

110 mm 6 kg Per cm2 PVC pipe ( M-872 )

110 mm PVC Elbow ( M- 0941)

110 mm PVC T Joint (M – 0949)

Quotation Items :-

Charges for removing of damaged PVC Pipes, Elbow and T joint and Refixing of 75 mm PVC Pipe, 75mm Elbow, 75 mm T joint for 480 Rm including Plastering with cement mortar 1:3 mix work and all cost conveyance etc.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Charges for servicing of Rolling Shutter with replacement of 00 kg×600 mm size - 4 Nos of Spring, 4 nos of Bearing wheel,Gear box wheel,including labour, Scaffolding and all cost conveyance etc.

Supply and Replacemant of Existing 7.5 HP Three Phase DOL Starter for Cutting Motar at MCC Center Etc., Completed.

Charges for repair and reconditioning of Cutting Machine with replacement of P-213 Ball Bearing- 2 nos, B74 Belt-2 nos, Sharpening the cutter blades including labour, transport and all cost conveyance

Supplying and erecting in position of following 10.00 liters capacity Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water in Mcc Center Etc., Completed

MARIAPPAN RAJENDRAN CONTRACTORS (BID ID -1262719)