Repairing and Painting of Annexure Building of Guest House at DCC Township

Amount

Item Description/ Heading

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) [IT No- 14.1.1, CPWD-18, Pg- 246]

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. [IT No- 15.56, CPWA-18, Pg- 263]

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate [IT No- 11.3.1, CPWA-18, Pg- 193]

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) [IT No- 13.90.1, CPWA-18, Pg- 236]

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). [IT No- 13.111.2, CPWA-18, Pg- 238]

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. [IT No- 13.85.3, CPWD-18, Pg- 236]

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Complete. [IT No- 13.80, CPWD-18, Pg- 235]

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. [IT No- 13.99.1, CPWA-18, Pg- 237]

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. [IT No- 13.91, CPWD-18, Pg- 236]

Providing and fixing insulating board ceiling of approved quality with necessary nails etc,complete(frame of work to be paid separetly); White face insulating board 12mm thick[IT No- 12.24.2.1, CPWD-18, Pg- 214]

Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. [IT No-9.10.4, CPWD-18,pg-160]

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² [IT No-12.1.2 , CPWD-18,pg-211]

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m². [IT No-12.4.1 , CPWD-18,pg-211]

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with : 22.8.1 Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322 [IT No- 22.8.1, CPWA-18, Pg- 390]

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 12.41.2 110 mm diameter. [IT No-12.41.2 CPWD-18,pg-216]

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend. [IT No-12.42.5.2 , CPWD-18,pg-216]

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe. [IT No-12.42.6.2 , CPWD-18,pg-216]

French spirit polishing : One or more coats on old work [IT No-13.103.1 , CPWD-18,pg- 229]

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. [IT No- 17.15, CPWD-18, Pg- 302]

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : Black solid plastic seat with lid [IT No- 17.20.2, CPWD-18, Pg- 302]

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White. [IT No- 17.18.1 , CPWD-18, Pg- 302]

Providing and fixing angular Cock

Providing and fixing Connective pipe

Providing and fixing CP Pillar Cock (ESSCO)

Providing and fixing CP Bib Cock (ESSCO)

Providing and fixing Toilet Shower

Providing and fixing PVC pipe 20 mm (3/ 4")

Providing and fixing PVC pipe 25 mm

Providing and fixing Ball Cock set (3/4")

Providing and fixing PVC Bib Cock

PVC Tank

Making one set of Scaffolding (a) 3.90 m height

Making one set of Scaffolding (b) Extra height for additional 3.6m height

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. [IT No- 15.60 , CPWD-18, Pg- 263]

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [IT No- 9.21.1 , CPWD-18, Pg- 150]

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes [IT No- 10.30.1 , CPWA-18, Pg- 187]

Providing and fixing Aluminium Sliding windows (1.3mm Aluminium x 3.5mm glass)

Providing and fixing Hand Shower.

PVC DOOR[IT No-9.142.1,CPWD-18,Pg-169]

Total impact of GST for the purpose of CTC

The Morning Glory

MAA JAGYODHATRI ENTERPRISE

MONDAL ENTERPRISE