SPL REPAIRS TO CERTAIN BR AND EM WORKS ALONGWITH ADDITIONAL ALTERATION TO OFFICERS INSTITUTE AT MILIT AND LASER LABORATORY REFURBISHMENT WORK AT ROOM 08 AND 09 OF P 219 AT DIAT GIRINAGAR PUNE

Amount

PART-I (Addn/altn special repairs) Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete all as directed by Engr-in-Charge.

PCC (1:2:4) type B1 using 20 mm graded aggregate as in padding (level course) on roof average 50 mm thick.

Rendering 15 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas complete all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately.

M&L for Cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

Supply only integral water proofing compound .

M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying 3.0 Kg/Sqm APP based polymeric membrane 3mm thick reinforced with polyster non-oven fabric on 1.20 kg/sqm hot blown bitumen and finished on top with preventive coat of Aluminium paint complete all as directed and as specified

Excavation in trenches not exc.1.5 m inwidth and 1.50 min depth and getting out in soft /loose soil.

Surface excavation not exc.30 cm deep and Avegraging 15 cm deep and getting out in soft/ loose soil.

M&L for 10 mm thick plastering on concrete or brick work surface in CM 1:4,finished surface even and fair without using extra cement.

M& for precast cement concrete block masonry with solid block of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc.10 cm in width and setting in CM 1:6, complete all as specified and directed.

Taking down chowkhats or frame without taking shutters not exc.1.50 sqm each and removing to store,etc. Complete.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded aggregate as in floor of 25 mm thick and finishing cement concrete surface even and fair without using extra cement.

M&L for PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick work in cm 1:6 finished even and smooth without using extra cement

Dismantling of wall or floor hearth tiles including cement motor bedding,etc complete

M&L for 100 mm thick PCC 1:4:8 Type D-2 with using 40 mm graded stone aggregate as in sub base to paving/flooring,etc complete .

M&L for Machine pressed precast cement concrete interlocking paver block any shape &size confirming to IS15658-2006 of 60 mm thick, M-35 Gde with glossy finish and grey cement with pigment,etc complete.

M&L for sand cushioning below interlocking paver block.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles 350x250x7mm thk on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in staircase steps etc. complete

M&L for ll nd class, Plain ,solid,semi-circular chowkhats,worked from the solid in two or more sectors,dovetailed and keyed with double headed hard wood keys

S&F 100 mm long butt hinges extruded brass alloy with galvanised mild steel hinge pine.

S&F 150mm size extruded brass handles,fabricated type & polished.

S/F 150mm long brass tower bolt,extruded type, barrel tower bolt .

Hacking of old broken glass(any thickness,size ,quality) from metal frame incl punching or drilling out old glazing pins/spring clips& providing &fixing new ones.

S & F 4mm thick sheet glass,ordinary quality,glazing with oil putty in square but exc. O.50 sqm in each.complete

S & F 100 mm long extruded brass handles,fabricated type polished,etc. complete

M&L 300 mm long ,brass sliding door bolt with sand or die-cast brass hasp,staple and fixing bolts with rolled or drawn brass bolts,etc.complete

M & L for hardcore of gauge not exc.63 mm,deposited,spread and levlled in layers not exc. 15 cm thick, watered and rammed toa true surface complete.

M & L for preparation of new wooden surface and provide two coats of varnishing over acoat of wood filler liquid transparent coat ,etc. Complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints

Taking down chowkhats or frame with shutters exc.1.50 sqm and not exc.4.00 sqm and removing to or from store

M & L for 40 mm thick, plain framed,panelled shutter (tw panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering both sides.The size of rail and style as per IS:1003 (Part-l),kiln seasoned and chemically pressure treated.

S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and aerage width of aperture 1.18 mm, etc complete.

M & L for PCC 1:3:6, type C-2 with using 40 mm graded stone aggregate as in foundations,filling and mass concrete,etc complete.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate for bed block and as in coping

M&L aluminum handles cast type anodised 150 mm

S & F Anodised aluminium powder coated (50 micron coating) for windows of three track with sliding type with two glazed & one fly proof including joining cleat,glazing clips,rubber packing,anodised aluminium snap beading,screws,etc complete for fixing.

S & F stainless steel wire cloth, 0.36 mm nominal dia wire and avgrage width of aperature 1.40 mm and fixed with stainless wire staples.

M & L for 110 mm PVC (SWR) pipe, single socketed,in any length, laid in trenches or in floors,etc.for wip holes, Complete.

M&L for prelaminated particle board of 18/19 mm thk interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fiixed with timber frame work of cupboards, book case etc

M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area not exceeding 3 sqcm

M & L for preparation of new wooden surface and provide two coats of synthetic enamel paint over a coat of primer,etc. Complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised

S&F 100 mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished

S&F Aluminium anodised tubular curtain rail with brackets all as directed by Engr-in-Charge

S & F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hosted and fixed in position,etc. Complete.

S & F 25 mm bore Gun metal, globe or gate valves,with iron wheel head, screwed down both ends for fixing iron pipes,complete.

S&F 20 mm bore brass valves,high pressure with poly thene float and flynut complete,screwed for iron pipe or brass furrel etc.

Taking down/disconnecting of water tanks exc.500 ltrs & not exc.1000 ltrs removing to store.

S&F 25 mm bore GI pipes medium grade with all fittings laid on floors, walls including taking down of old tubing.

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes.

Taking up or down steel tubing of 20 mm dia and connections including cleaning for re-fixing and cutting/screwing steel tubings and re-fixing old steel tubings and connections in new or old position (walls ceiling or floors etc.) all as directed by Engr-in-Charge

Taking up or down steel tubing of 15 mm dia and connections including cleaning for re-fixing and cutting/screwing steel tubings and re-fixing old steel tubings and connections in new or old position (walls ceiling or floors etc.) all as directed by Engr-in-Charge

S & F Anodised aluminium frame for doors,windows,ventilators of powder coated (minimum thickness of power coating 50 micron),with one or more rebates including cleat for fixing,etc.complete.

M & L for Anodised aluminium door shutters powder coated of any colour, aluminium section as directed incl necessary joining cleats, glazing clips,ruber neoprene packing,handles 2 nos each door,hinges,alu snap beading screws,etc. Complete.

M & L for floor door closer hydraulically regulated,designation no.3,aluminium extruded section,universal type,suitable for door width 851 mm to 1000 mm in width of wt.61 to 80 kg

Removing surplus excavated matiral not exc.50 m and depositing where directed at a level not exc.1.5 m above the starting point.

M&L for preparation of old painted surface and provide one coats of OBD on walls

M & L for preparation of old painted surface of walls and provide one coat of cement base paint,etc complete.

S & F 35 mm thick II nd class hard wood glazed and skleton shutters,open rebated &prepared to receive glass and gauge,etc (without sash bars) edges of framing plain,chamfered or rounded,fitted with cut &mitred beads for securing glass,gauge etc.fitted to chowkats complete all as specified.

Taking down shutters not exc.1.50 sqm and removing to or from store

M & L for removal of existing treatment on external wall surfaces and provide two coats of Weather Proof paint over acoat of primer,etc complete.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning , filling in and ramming earth or broken rubble mixed with earth around , in layers not exc 25 cm , in hard/dense soil.

Dismantling of mild steel framed work as in gates, doors,fencing,etc. Complete all as specified .

Excavation in trenchs not exc.1.50 m in width and 1.50 min depth as in foundation of walls,pillars,etc.and getting out in hard/dense soil.

M & L for PCC 1:3:6, type C-2 with using 40 mm graded stone aggregate as in mass filling around fencing post.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L for MS Angle iron as fencing post cut indepently and embedding in concrete including cutting tops to shape as directed , drilling holes , notching for wire at flat iron fillets , (for securing wire mesh etc) including all necessary drilling bolting or rivrting etc complete all as specified and directed.

S&F Framed work such as grill,gratings,gates etc.with ends of bars shouldered or riveted,forged into spikes,framed guard bars,gates railings,ladders,etc.confirming to Fe-290,Gde E-165 incl portions framed and hung as ornamental and intricate design gates with pintal hinges,stops,hand made sliding bolts etc .complete.

M & L for RCC Nominal Mix,type B-1 with using 20 mm graded stone aggregate as in footing concrete foundation etc , complete.

M & L for RCC Nominal Mix,type B-1 with using 20 mm graded stone aggregate as in columns,pillars, etc , complete.

M & L for 10 mm and over dia bars TMT,cut to length,bent to shape required incl cranking,bending spirally hooping for columns,hooking ends & binding with ms wire annealed not less than 0.9 mmdia or securing with clips,etc.complete.

All as per item no. 78.00 above,but 5 mm and upto 10 mm dia TMT bars as in stirrups,spacers and binders,etc.

M & L for form work to sides of concrete in foundations,footing bases of columns,etc complete.

M & L for form work to sides of columns,pillars,posts,etc complete.

M & L for Precast concrete block masonry with PCC 1:3:6,type C-1 with using 20 mm graded stone aggregate,exc.10 cm width &setting and jointing in cm 1:6,etc.complete.

M & L for 15 mm thick plastering on concrete or brick masonry surface finished surface even and smooth without using extra cement in CM 1:6,etc.complete.

M & L for preparation of new plastered surface and provide two coats of cement base paint over a coat of primer,etc. Complete.

Returning & filling in including spreading,levelling,watering & well ramming in layers not exc.25 cm ,etc complete.

Removal of surplus excavated material exc 250 mtr and not exc.500 mtr depositing where directed at alevel n. Exc. 1.50 m above the starting point,etc complete.

S &F 300 mm dia bore,RCC hume pipes, NP-2 class,laid and jointed complete with collars,etc.all as specified.

M & L for welded steel fabric of weight not less than 4 Kg/ sqm. Welded to steel frame work,etc.complete all as specified.

M & L for Precast reinforced cement concrete,1:2:4,,type B-1 with (using 20 mm graded stone aggregate),in precast fencing post,struts for fencing,avegrage sectional area not exc.100 Sq cm,with or without chamfered angles and flat,splayed,rounded or mitred tops,etc.complete.

M & L for precast cement concrete 1:2:4,type B-0 with using (12.50 mm graded stone aggregate)as in jallies,louvers of 25 mm thick incl moulding and set in cm 1:4,etc.complete.

M &L for providing precast cement concrete 1:2:4,type B-0 with using 12.50 mm graded stone aggregate as in jallies,louvers,etc.complete.

Dismantling of stone masonry work built in cement mortar including all quoins,archs,pillars,etc.complete

M & L for stone masonry walling of random rubble uncoursed,well bonded,bedded and solidly hearted in CM 1:6 ,etc.complete all as specified.

All as per item no.93.00 above but except stone,labour only.

M & L for keyed pointing to stone masonry surface in CM 1:4 etc. Complete all as specified.

Preparation of new steel surfaces over 10 cm in width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer .

PART -II (Refurbishment work room No. 08 & 09) Dismantling wrought iron or mild steel work of any description.

Taking down chowkats or frames of wooden exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames).

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Demolition of Brickwork or stone/boulder masonary, built in Cement mortar

M&L for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6, exc. 10 cm in width and setting in mortar 1:6 complete

Rendering 10 mm thick of fair faces of brick work or concrete surface in CM 1;6. finished even and smooth without using extra cement.

Rendering 15 mm thick of fair faces of brickwork or concrete work in CM 1:4. in double coat finished even and smooth without using extra cement with waterproofing compound.

Supply only waterproofing compound

Forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and pointing (if necessary) to match existing work complete in CM 1:4

M&L for two coats of cement based paint over a coat of primer on new all surface

S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for doors , windows, ventilators, partition wall etc. with one or more rebates, shutters, grills including joining cleat glazing clips for fixing etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm)

S&F anodized aluminium door shutters aluminium section weighing 0.55kg/m including necessary joining cleat glazing clip, rubber neoprene packing, handles 2 no in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. including Powder coating of any colour (Thickness of powder coating not less than 50 Micorn)

S&F 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to Aluminium frame work .

M&L for Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane 5.5mm Thk in doors, in partition

M&L for solar control film 25micorn relfective type sticked to glass panes as per insturction of manufactureres

S&F 2nd class hardwood plain, solid, staright chowkats and frames, wroughts, framed rebatede on the solid, rounded or chamfered but together with glue pinned at joints supplied and fixed.

M&L for PCC 1:3:6 type B1 (20mm Graded stone aggregate) as in filling in frame and bed block for fixing of holdfast fo door frame.

S & F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides 40mm Thk

S&F Decorative Laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive to Plywood as per manufacturers instruction.0.9mm Thick

Preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer

M&L Aluminium (Extruded section) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed

S&F brass sliding door bolts with sand or die cast brass hasp and staple (Bolt Type) and fixing bolt and fixed length of bolt 250mm.

S&F aluminium anodised barrel tower bolts of extruded section 200 mm long.

S&F Brass handles, polished type, of size 150mm.

S&F butt hinges 100mm size stainless steel medium weight all as specified.

M&L for Locks, drawer,grade I, size 75 mm 4 Lever in brass fixed to Aluminium door with duplicate keys

M&L for formwork to sides and soffits of lintel beam, floor or roof beam etc

M&L for RCC Nominal Mix Type B1 1:2:4 (20mm Graded aggregate) concrete in lintel beam, cantilever etc

S&F TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends and bindng with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Same as per item above but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders

M&L for hangers 6mm dia GI adjusting level fixed to roof slab/steel truss by means of ceiling cleats made out of GI flat 40X3mm size 60mm long.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course, filling around Nahani trap etc and in similar situations

M&L Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:6 complete all as specified and directed.

M&L for mirror polished Kota stone slab 20-25mm thick in riser or skirting of steps in single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 10mm thick screed in CM(1:4) complete all as specified and directed by Engr-in-charge.

S&F MS holdfast vonfirming to FE 290 Gde E-165

Preparing surfaces of wood and wood based materials, steel and iron work, new or old and ay description and girth not otherwise described and treated with tar or coal tar black paint.

Part-II (spl item B/R) S&F of 600x600x0.7mm thick powder coated aluminium tile square tegular with semi concealed grid. The tile shall be laid on semi concealed grid system with 15mm white flange incorporating 6mm central reveal in white/black colour and with web height of 38 mm and load carryingcapacity of minimum 11.68 Kg/sqm. Silhouette. Main runner and cross tees to have mitered ends & bird mouth notches to provice mitred cruciform junction. The T sections have galvanzing of 120 gms/sqm. (Make : Armstrong, saint Gobain).

M&L for complete removal of existing paint and applying two coats of acrylic emulsion paint (luster paint) internally over a coat of primer over 3mm thick coat of putty in two layers on old or new surfaces of wall

E/M WORKS:(Addn/altn E/M works) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

Taking down sub main wiring/XLPE cable of any sizes and ani capacity complete i all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing capping fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including concealed MS box with 3mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed. (a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One 3 pin switch socket outlet point 5 Amps on independent board.

(d) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size.

S & Fix modular switch1 way 6A, 1 module

S & Fix modular switch1 way 16A, 1 module

S & Fix Modular socket 6A 2/3 on combined 2 module

S & Fix Modular socket 6A/16A-2/3 pin combined 2 module

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete.

S & Fix Modular fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts, 4 step complete all as directed.

Supply & fixing round surface mounting LED 12 W Panel PDC aluminium housing and high tranlucent frosted plastic deffuser makes it a robust luminaire efficancy 100 lm/w with all fixing arrangement complete with all as specified and directed by Engr-in-Charge. Make-Crompton cat part no - LCDSPLN-R-12-NW or equivalent model of WIPRO / Philips / Bajaj and Jaquar

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & Fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door suitable for mounting MCBs all as specified and as directed. Make : Legrand or eqvt make of ABB/Siemens/C & S / Schnaider/Standerd.

S & Fix sheet metal enclosure distribution board (double door) SPN, 2 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed. Make : Legrand or eqvt make of ABB/Siemens/C & S / Schnaider/Standerd.

S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA complete all as specified and directed. Make :- Legrand or eqvt make of ABB/Siemens/C & S / Schnaider/Standerd.

S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA complete all as specified and directed. Make :- Legrand or eqvt make of ABB/Siemens/C & S Schnaider/Standerd.

M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing and capping with its accessories all as specified and directed by Engr-in -charge for the following (a) 2x1.5 sq mm and 1x1.5 sq mm as earth wire

(b) 2x6.0 sq mm and 1x6.0sq mm as earth wire

S & Fix LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and with suitable size pipe Bracket, nut, bolts and clips complete accessories all as specified and directed by Engr-in-charge. Make: Bajaj Cat No-BCLST 30W LED I or eqvt wipro/crompton/Jaquar.

Part-II (External electric supply) Supply and Laying in trenches LT underground cable ISI marked XLPE insulated armoured and PVC sheathed 1100 Volts grade with aluminium conductor multistranded including cable connecting lugs, glands,jointing materials etc, laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole,making hole in wall as per requirement at site complete all as directed by Eng-in-charge of following:- (a) 3 core 4 Sqmm

(b) 4 core 6 Sqmm

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Hard / dense or any type of soil including forming bottom surface etc.

Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick complete.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement

M &L for cutting of bituminous road / floor for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.

M &L for GI pipe medium grade, for road crossing / on wall / on pole for cable protection of following size:- Make: TATA/JINDAL/ PRAKASH SURYA a) 50 mm dia

S & Fix outdoor type FRP junction box suitable on Pole / gate light fittings/Walls mounting inclduing MCB SP 1 Amps single pole and necessary connector for loop in loop out cable connection and suitable size glands,all as specifiedand directed. Make - Syntex/ Anchor

S & Fix LED Flood light 60 W High performance IP 66 LED flood light lumaniries with secondary optics made in pressure die - cast housing and heat sink in aluminium extrusion and all fixing arrengenment of pole/wall/bracket / chanel by belding and nut and bolts complete accessories all as specified and directed by Engr-in-charge Make- Wipro cat part no - LF19-711-060-57-XX or Eqvt in Bajaj, Havells and Crompton.

S & Fix LED RUBY (clear) 25 W LED Post top fitting, IP - 65 new genration, post top,energy saving, environmental friendly, long life aesthetically designed with symmentrical light distribution spun aluminium landscape luminaire with high powder LEDs as light source compartable for all gate piller and including GI pipe required to sizes to fixed at site by growting in wall/roof /piller/boundary wall and PCC foundation as persite requirement. Make :- Havells cat part no - RUBYPT25WLED757PSYMTOPC or eqvt in Bajaj/crompton /wipro

Part-II (Addn/Altn & splecial repairs E/M) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including modular cover plates and modular flush boxes, Plate for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed. (a) One light point/ fan point controlled by one way switch

(b) One socket point 6 Amps on same board

(c) One socket point 6 Amps on independent board

-- Ditto --- all as per item Sl No 4 above but with 2.5 sq mm PVC insulated cable and 2.5 sq mm as earth wire for 16 amps socket outlet on independent board

S & Fix modular switch single pole,one way 6 Amps capacity

S & Fix modular switch single pole,one way 16 Amps capacity

S & Fix modular socket, outlet 2 in 1, 6 Amp capacity

S & Fix modular socket, 6A/16A 2 in1, 16 Amp capacity

S & Fix fan Regulator step down 100 Watt 2 module.

S & Fix LED 36 watts recessed mounting 2x2 luminaire to enhance the delight of occupants with comfortable experience through its classic & glare free soft illumination and fixing of ceiling with complete accessories all as specified and directed by engr-in charge. MAKE- Bajaj CAT No - BZRSQL 36 W GZ1 CW or equivalent to wipro/CG/Havells.

S & Fix of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 100 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.Make:- Legrand/Indo Asian/C & S.

S & Fix of MCB single pole and neutral, 240 volts, 5 to 63 Ampere, rupturing capacity 10 KA complete all as specified and directed.

S & Fix of MCB single pole, 240 volts, 5 to 32 Ampere, rupturing capacity 10 KA complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC Concealed Conduit with its accessories all as specified and directed by Engr-in -charge for the following (a) 2x2.5 sq mm and 1x2.5sq mm as earth wire

(b) 2x4.0 sq mm and 1x4 sq mm as earth wire

(c) 2x6.0 sq mm and 1x6 sq mm as earth wire

(d) 4x6.0 sq mm and 1x6 sq mm as earth wire

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & Fix for ceiling fan down rods 1.0 M Long of 15 mm dia GI pipe to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

S & Fix LAN cable 4 pairs PVC insulated and PVC sheathed all as directed by Engr in Charge

S & Fix LAN socket connecter RJ45 with socket with copper feed modular type all as directed by Eng in Chrage

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality, Refrigerent R-410 with inverter technology of capacity 1.5 TR Make :- Voltas

S & Fix Single pole and neutral enclouser with two pin and earthplug and socket complete with one single pole MCBs with 240 V 20 AMPs MCBs.

S & Fix suction and discharge copper tubing pipe 3/8" and 5/8" for split type AC including provision of insulation on tubing, PVC insulated flexible multistranded copper cable 3 core 2.5 sqmm all as directed by Engr-in-charge.

S & Fix voltage stabiliser for automatic operation , single phase naturaly air cooled indoor type and designed for input variation between 170 to 270 volts with out put voltage stabilized at 230 volts with accuracy +/- 2.5% and of capacity 4 KVA Make :- V Guard

Cutting holes by core cutting machine or other mean into or through cement concrete slabs, chajjas, reinforced or otherwise, brick / stone masnary walls etc. cutting area n. exe. 100 sqcm and making good disturbed surfaces

Part-II (spl item E/M) Supply and fix UPS 20 KVA (3-3), Input 3 Phase, 380VAC / 400VAC (3Ph + N) Acceptable Voltage range - 285 VAC - 475 VAC Frequency range - 50Hz / 60 Hz +10% overall efficiency (AC Mode) - 91%, Efficiency (Battery Mode) 91%, Battery type - SMF type, 12V, 65 AH-30 Nos of battery, Make:- Exide, Operating temperature :- 0 - 50ºC ,Humidity - 0 - 90% (non condencing) Noise level - less than 60 dBA @ 1 meter, Output : 3 x 380/400VAC +/- 1% (3Ph +N), 415 VAC (Adjustable), Frequency range - 50 Hz +/- 1%, Power facter - 0.8, Overload capacity 110% for 10 minute. Make - Microtek - i - MAXX SERIES or equivalent make and specification as approved by Engr-in-charge.

J.G.Goel